Chemical Industry and Engineering Progress ›› 2019, Vol. 38 ›› Issue (s1): 64-69.DOI: 10.16085/j.issn.1000-6613.2019-0993

• Chemical processes and equipment • Previous Articles     Next Articles

Effect of concentration on boiling characteristics of LiCl solution under vacuum

HAN Xiaowan, ZOU Tonghua, CHANG Yafei, HUI Qingling   

  1. Tianjin Key Laboratory of Refrigeration Technology, Tianjin University of Commerce, Tianjin 300134, China
  • Received:2019-06-21 Revised:2019-07-11 Online:2019-11-16 Published:2019-11-16

真空条件下浓度对LiCl溶液沸腾特性的影响

韩晓婉, 邹同华, 常亚飞, 惠庆玲   

  1. 天津商业大学天津市制冷技术重点实验室, 天津 300134
  • 通讯作者: 邹同华,博士,教授,研究方向为溶液除湿。
  • 作者简介:韩晓婉(1993-),女,硕士研究生,研究方向为溶液除湿。E-mail:936253508@qq.com。
  • 基金资助:
    天津市自然科学基金重点项目(16JCZDJC31500);天津市教委科研计划重点项目(2017ZD09)。

Abstract: Boiling heat transfer is an efficient way of heat transfer. In order to research the boiling heat transfer processes in regeneration of dehumidifying solution, the test experiment bench of boiling characteristics under vacuum was set up. Experimental study was conducted on water, LiCl solutions with mass concentration of 30%, 32% and 34%. Obtaining the effects of solution concentration on boiling heat flux density and boiling surface heat transfer coefficients. The results shows, with the increases of concentration, the surface tension increase and number of nucleation sites decreased, viscosity increases, bubble escape difficulty, disturbance reduced, so the heat flux density and boiling heat transfer coefficients of solution reduced. With the increase of temperature difference, the wall superheat increases, bubble formation increases and the disturbance to solution increases, so that the heat flux density and boiling heat transfer coefficient of solution increase.

Key words: boiling characteristic, desiccant, vacuum, nucleation site, convection, corrosion

摘要: 沸腾换热是一种高效的换热方式,为研究除湿溶液再生的沸腾换热过程,搭建真空再生沸腾特性测试实验台,对水和质量分数分别为30%、32%、34%的LiCl溶液进行实验研究,得到溶液浓度对溶液沸腾热流密度及沸腾表面传热系数的影响。结果表明,浓度升高,表面张力增大,汽化核心数减少;黏度增大,气泡脱离困难,使扰动量减少,溶液的热流密度降低;随着浓度的增大,表面张力增大,气泡生成及脱离阻力增大,对LiCl溶液的扰动程度降低,使溶液的沸腾传热系数减小。温差增大使壁面过热度增大,气泡生成增多,加强对溶液的扰动,使溶液的热流密度及沸腾传热系数增大。

关键词: 沸腾特性, 除湿, 真空, 汽化核心, 对流, 腐蚀

CLC Number: 

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd