Research on end face sealing characteristics of air classifier

doi:10.16085/j.issn.1000-6613.2017.03.007

Chemical Industry and Engineering Progress ›› 2017, Vol. 36 ›› Issue (03): 816-822.DOI: 10.16085/j.issn.1000-6613.2017.03.007

Previous Articles Next Articles

Research on end face sealing characteristics of air classifier

ZENG Chuan¹, LI Xue², ZOU Pencheng², LI Penchao², CHEN Haiyan², LIU Chuanhui¹

1 School of Manufacturing Science and Engineering, Southwest University of Science and Technology, Mianyang 621010, Sichuan, China;
2 School of Environment and Resource, Southwest University of Science and Technology, Mianyang 621010, Sichuan, China

Received:2016-07-15 Revised:2016-08-05 Online:2017-03-05 Published:2017-03-05

一种气流分级机端面密封特性研究

曾川¹, 李雪², 邹鹏程², 李鹏超², 陈海焱², 刘传慧¹

1 西南科技大学制造科学与工程学院, 四川绵阳 621010;
2 西南科技大学环境与资源学院, 四川绵阳 621010

通讯作者: 李雪,硕士,讲师,从事粉体超细粉碎分级设备与工业通风除尘技术。
作者简介:曾川(1992-),男,硕士研究生,研究方向为超细分级设备。E-mail:1421957597@qq.com。
基金资助:
西南科技大学研究生创新基金（15ycx130）及国家自然科学基金（11402218）项目。

Abstract

Abstract:

Turbo air classifier was an ultra-fine grading equipment broadly applying in ultrafine classifying industry. However,the leakage phenomenon of coarse powder about classifier with traditional labyrinth seal was not eliminated. In this paper,impacts of end face sealing gap and gas sealing pressure change to different material classification effects were investigated,and the relative classification precision to evaluate the quality of classifying was used. Gas sealing fluid field was simulated by Ansys Workbench 15.0. The distribution of the gas sealing fluid field was presented by its velocity field and pressure field. Numerical simulation and experimental results showed that the relative classification precision decreased along with the increase of end face sealing gap. Optimum relative classification precision was obtained. Classifier could be normal operated under the condition of 3mm of end face sealing gap. The relative classification precision first increased then decreased along with the increase of gas sealing pressure under the condition of 3mm of end face sealing gap with gas seal. When gas sealing pressure was 0.15MPa,the relative classification precision of fly ash and slag was the highest. The failure of gas sealing pressure was 0.05MPa. The performance of classifier and classification effect was better under the condition of the same end face sealing gap and used gas seal. The relative classification precision of fly ash and slag increased from 0.202,0.187 to 0.458 and 0.408.

Key words: air classifier, labyrinth seal, gas seal, relative classification precision, numerical simulation

摘要：

涡轮气流分级机是应用十分广泛的超细分级设备，但是仍存在分级机端面跑粗现象。本文通过实验探究分级机端面间隙对不同物料分级效果的影响，并在传统迷宫密封的基础上设计一种气密封装置，探究不同气封压力对不同物料分级效果的影响，并以相对分级精度为评价指标。利用Ansys Workbench 15.0软件，对气流密封的流体区域进行了数值模拟，得出了压力场和速度场的分布情况。模拟及实验结果表明：相对分级精度随着分级机端面间隙的增大而减少，当间隙保持在3mm左右时，相对分级精度较高且分级机亦可正常运转；在分级机端面间隙为3mm以下时，增加气流密封，相对分级精度随气封压力的增加先增大后减小，当气密封压力为0.15MPa时，粉煤灰和矿渣的相对分级精度最高；气流密封的失效压力为0.05MPa；在相同间隙的情况下，增加气密封，粉煤灰和矿渣的相对分级精度分别从0.202、0.187增加到0.458、0.408，分级机性能得到提高，分级效果更为良好。

关键词: 气流分级机, 迷宫密封, 气流密封, 相对分级精度, 数值模拟

CLC Number:

TQ051.8

ZENG Chuan, LI Xue, ZOU Pencheng, LI Penchao, CHEN Haiyan, LIU Chuanhui. Research on end face sealing characteristics of air classifier[J]. Chemical Industry and Engineering Progress, 2017, 36(03): 816-822.

曾川, 李雪, 邹鹏程, 李鹏超, 陈海焱, 刘传慧. 一种气流分级机端面密封特性研究[J]. 化工进展, 2017, 36(03): 816-822.

References

[1] 曹丽华,刘雅超,张玉峰,等. 凹槽迷宫密封封严特性的数值研究[J]. 润滑与密封,2014(9):8-13,18. CAO L H,LIU Y C,ZHANG Y F,et al. Numerical investigation of leakage effects of rub-grooves on labyrinth seal[J]. Lubrication Engineering,2014(9):8-13,18.
[2] Subramanian S,Sekhar A S, Prasad B.Rotordynamic characteristics of rotating labyrinth gas turbine seal with centrifugal growth[J].Tribology International,2016,97:349-359.
[3] 李凤生,等. 超细粉体技术[M]. 北京:国防工业出版社,2000. LI F S,et al. Ultrafine powder technology[M]. Beijing:National Defence Industry Press,2000.
[4] 刘雪东,卓震. 超细气流粉碎分级系统产品粒径的确定与控制[J]. 石油化工高等学校学报,2001(1):59-63. LIU X D,ZHUO Z. Determination and control of product size for a ultrafine milling-classifying closed loop system[J]. Journal of Petrochemical Universities,2001(1):59-63.
[5] 盖国胜. 超细粉碎分级技术:理论研究·工艺设计·生产应用[M]. 北京:中国轻工业出版社,2000. GAI G S. Ultrafine grinding classification technology:theory research,process design,production and application[M]. Beijing:China Light Industry Press,2000.
[6] 曾川,刘传慧,陈海焱,等. 二次风量对LNJ-36A型气流分级机分级性能的影响[J].化工进展,2015,34(11):3859-3863. ZENG C,LIU C H,CHEN H Y,et al. Effect of secondary air on the classification performance of LNJ-36A air classifier[J]. Chemical Industry and Engineering Progress,2015,34(11):3859-3863.
[7] 郑水林. 中国超细粉碎和精细分级技术现状及发展[J].现代化工,2001(11):10-15. ZHENG S L. Progress of ultra-fine grinding and classifying techniques in China[J]. Modern Chemical Industry,2001(11):10-15.
[8] AIZAWA Takashi,BABA Akira,KONDO Yuki,et al. Rotating classifier:US8714359[P]. 2014-05-06.
[9] Huang C C,Pavlosky J M. Classifier apparatus for particulate matter/powder classifier:US6276534[P].2001-08-21.
[10] 张德. 重视选粉机密封的作用[J].水泥,2003(6):25-26. ZHANG D. Emphasis on the role of separator seal[J]. Cement,2003(6):25-26.
[11] 张保玉. 离心式选粉机产品跑粗的分析与处理[J].水泥技术,2003(6):79. ZHANG B Y. Coarse size analysis and treatment from centrifugal separator[J]. Cement Technology,2003(6):79.
[12] 袁洪钦,赵云峰. 选粉机原因造成细度连续跑粗的快速处理[J]. 四川水泥,2006(6):23. YUAN H Q,ZHAO Y F. Classifier caused the continuous running thick fineness rapid processing[J]. Sichuan Cement,2006(6):23.
[13] ROLAND N,HERMANN S. Method for generating finest particles and jet mill therefor as well as classifier and operating method thereof:US7866582[P]. 2011-01-11.

[1]	WANG Tai, SU Shuo, LI Shengrui, MA Xiaolong, LIU Chuntao. Dynamic behavior of single bubble attached to the solid wall in the AC electric field [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 133-141.
[2]	CHEN Kuangyin, LI Ruilan, TONG Yang, SHEN Jianhua. Structure design of gas diffusion layer in proton exchange membrane fuel cell [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 246-259.
[3]	YANG Yudi, LI Wentao, QIAN Yongkang, HUI Junhong. Analysis of influencing factors of natural gas turbulent diffusion flame length in industrial combustion chamber [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 267-275.
[4]	GUO Qiang, ZHAO Wenkai, XIAO Yonghou. Numerical simulation of enhancing fluid perturbation to improve separation of dimethyl sulfide/nitrogen via pressure swing adsorption [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 64-72.
[5]	SHAO Boshi, TAN Hongbo. Simulation on the enhancement of cryogenic removal of volatile organic compounds by sawtooth plate [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 84-93.
[6]	CHEN Lin, XU Peiyuan, ZHANG Xiaohui, CHEN Jie, XU Zhenjun, CHEN Jiaxiang, MI Xiaoguang, FENG Yongchang, MEI Deqing. Investigation on the LNG mixed refrigerant flow and heat transfer characteristics in coil-wounded heat exchanger (CWHE) system [J]. Chemical Industry and Engineering Progress, 2023, 42(9): 4496-4503.
[7]	LIU Xuanlin, WANG Yikai, DAI Suzhou, YIN Yonggao. Analysis and optimization of decomposition reactor based on ammonium carbamate in heat pump [J]. Chemical Industry and Engineering Progress, 2023, 42(9): 4522-4530.
[8]	ZHAO Xi, MA Haoran, LI Ping, HUANG Ailing. Simulation analysis and optimization design of mixing performance of staggered impact micromixer [J]. Chemical Industry and Engineering Progress, 2023, 42(9): 4559-4572.
[9]	YE Zhendong, LIU Han, LYU Jing, ZHANG Yaning, LIU Hongzhi. Optimization of thermochemical energy storage reactor based on calcium and magnesium binary salt hydrates [J]. Chemical Industry and Engineering Progress, 2023, 42(8): 4307-4314.
[10]	YU Junnan, YU Jianfeng, CHENG Yang, QI Yibo, HUA Chunjian, JIANG Yi. Performance prediction of variable-width microfluidic concentration gradient chips by deep learning [J]. Chemical Industry and Engineering Progress, 2023, 42(7): 3383-3393.
[11]	SHAN Xueying, ZHANG Meng, ZHANG Jiafu, LI Lingyu, SONG Yan, LI Jinchun. Numerical simulation of combustion of flame retardant epoxy resin [J]. Chemical Industry and Engineering Progress, 2023, 42(7): 3413-3419.
[12]	WANG Shuo, ZHANG Yaxin, ZHU Botao. Prediction of erosion life of coal water slurry pipeline based on grey prediction model [J]. Chemical Industry and Engineering Progress, 2023, 42(7): 3431-3442.
[13]	ZHOU Longda, ZHAO Lixin, XU Baorui, ZHANG Shuang, LIU Lin. Advances in electrostatic-cyclonic coupling enhanced multiphase media separation research [J]. Chemical Industry and Engineering Progress, 2023, 42(7): 3443-3456.
[14]	ZHANG Chenyu, WANG Ning, XU Hongtao, LUO Zhuqing. Performance evaluation of the multiple layer latent heat thermal energy storage unit combined with nanoparticle for heat transfer enhancement [J]. Chemical Industry and Engineering Progress, 2023, 42(5): 2332-2342.
[15]	LU Xingfu, DAI Bo, YANG Shiliang. Super-quadric discrete element method investigation of mixing behaviors of cylindrical particles in a rotating drum [J]. Chemical Industry and Engineering Progress, 2023, 42(5): 2252-2261.

Research on end face sealing characteristics of air classifier

一种气流分级机端面密封特性研究

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments