Chemical Industry and Engineering Progress ›› 2018, Vol. 37 ›› Issue (04): 1257-1266.DOI: 10.16085/j.issn.1000-6613.2017-2179
Previous Articles Next Articles
CHEN Aqiang1, HUANG Qingshan1,2, GENG Shujun1, YANG Chao1,2
Received:
2017-10-24
Online:
2018-04-05
Published:
2018-04-05
陈阿强1, 黄青山1,2, 耿淑君1, 杨超1,2
通讯作者:
杨超,研究员,博士生导师,研究方向为反应器设计与放大。
作者简介:
陈阿强(1988-),男,博士,助理研究员。E-mail:chenaq@qibebt.ac.cn。
基金资助:
CLC Number:
CHEN Aqiang, HUANG Qingshan, GENG Shujun, YANG Chao. Hydrodynamic characteristics of gas-liquid two phase flow in jet reactors[J]. Chemical Industry and Engineering Progress, 2018, 37(04): 1257-1266.
陈阿强, 黄青山, 耿淑君, 杨超. 喷射反应器内气液两相流体动力学特征[J]. 化工进展, 2018, 37(04): 1257-1266.
Add to citation manager EndNote|Ris|BibTeX
URL: https://hgjz.cip.com.cn/EN/10.16085/j.issn.1000-6613.2017-2179
[1] CHU Q Y,WANG P,HE G K,et al. Continuous three-phase 2-butanone ammoximation process via spray forming TS-1 microspheres in a highly efficient jet loop reactor[J]. Chemical Engineering Journal,2017,325:169-175. [2] PEREZ J F,LLANOS J,SAEZ C,et al. The jet aerator as oxygen supplier for the electrochemical generation of H2O2[J]. Electrochimica Acta,2017,246:466-474. [3] ZHOU Y M,SUN Z N,GU H F,et al. Experimental research on aerosols collection performance of self-priming Venturi scrubber in FCVS[J]. Progress in Nuclear Energy,2015,85:771-777. [4] GULHANE N,LANDGE A,SHUKLA D,et al. Experimental study of iodine removal efficiency in self-priming Venturi scrubber[J]. Annals of Nuclear Energy,2015,78:152-159. [5] 周艳民,孙中宁,谷海峰,等. 自吸式文丘里洗涤器引射特性及其影响因素[J]. 化工学报,2015,66(1):99-104. ZHOU Yanmin,SUN Zhongning,GU Haifeng,et al. Injection performance and influencing factors in self-priming Venturi scrubber[J]. CIESC J.,2015,66(1):99-104. [6] MUKHERJEE S,DAS S K,BISWAS M N. Absorption of carbon disulphide in alkaline solution in spray and ejector columns[J]. Chemical Engineering and Processing,2007,46(3):181-186. [7] SAREVSKI M N,SAREVSKI V N. Characteristics of R718 refrigeration/heat pump systems with two-phase ejectors[J]. International Journal of Refrigeration,2016,70:13-32. [8] CHUNNANOND K,APHORNRATANA S. Ejectors:applications in refrigeration technology[J]. Renewable and Sustainable Energy Reviews,2004,8(2):129-155. [9] 耿利红,刘华东,魏新利,等. 操作参数对双蒸发压缩/喷射制冷系统性能的影响[J]. 化工学报,2017,68(3):1146-1154. GENG Lihong,LIU Huadong,WEI Xinli,et al. Influence of operating parameters on the performance of bi-evaporator compression/ejection refrigeration system[J]. CIESC J,2017,68(3):1146-1154. [10] GABBARD C H. Development of a Venturi type bubble generator for use in the molten-salt reactor xenon removal system[R]. US:Atomic Energy Commission,1972:1-30. [11] 张建阔,李加念,吴昊,等. 基于双吸肥口的低压文丘里施肥器设计与试验[J]. 农业工程学报,2017,33(14):115-121. ZHANG Jiankuo,LI Jianian,WU Hao,et al. Design and experiment of low pressure Venturi injector based on double fertilizer inlets[J]. Transactions of the Chinese Society of Agricultural Engineering,2017,33(14):115-121. [12] KHOUFI S,LOUHICHI A,SAYADI S. Optimization of anaerobic co-digestion of olive mill wastewater and liquid poultry manure in batch condition and semi-continuous jet-loop reactor[J]. Bioresource Technology,2015,182:67-74. [13] MADZIVIRE G,GITARI W,VADAPALLI V,et al. Jet loop reactor application for mine water treatment using fly ash,lime and aluminium hydroxide[J]. International Journal of Environmental Science and Technology,2015,12(1):173-182. [14] POURKARIMI Z,REZAI B,NOAPARAST M. Effective parameters on generation of nanobubbles by cavitation method for froth flotation applications[J]. Physicochemical Problems of Mineral Processing,2017,53(2):920-942. [15] 杨高东,刘小鹃,吴平铿,等. 喷射环流反应器应用研究进展[J]. 化工进展,2011,30(9):1878-1883. YANG Gaodong,LIU Xiaojuan,WU Pingkeng,et al. Research progress of application of jet-loop-reactor[J]. Chemical Industry and Engineering Progress,2011,30(9):1878-1883. [16] WITTE J H. Mixing shocks in two-phase flow[J]. Journal of Fluid Mechanics,1969,36(4):639-655. [17] 姚云,郭方飞,周波,等. 气液喷射器内的气液流型分析[J]. 高校化学工程学报,2008,22(5):895-899. YAO Yun,GUO Fangfei,ZHOU Bo,et al. The flow regimes of gas-liquid flow in up-flow ejectors[J]. Journal of Chemical Engineering of Chinese Universities,2008,22(5):895-899. [18] 姚云,郭方飞,周波,等. 喷射器内气-液两相流流型及其转换特性的研究[J]. 高校化学工程学报,2009,23(3):392-396. YAO Yun,GUO Fangfei,ZHOU Bo,et al. Study on the flow pattern and its transition character of gas-liquid two phase flow in ejectors[J]. Journal of Chemical Engineering of Chinese Universities,2009,23(3):392-396. [19] BRIENS C,HUYNH L,LARGE J,et al. Hydrodynamics and gas-liquid mass transfer in a downward venturi-bubble column combination[J]. Chemical Engineering Science,1992,47(13/14):3549-3556. [20] KIM S,KWON S. Experimental determination of geometric parameters for an annular injection type supersonic ejector[J]. Journal of Fluids Engineering,2006,128(6):1164-1171. [21] KIM Y K,LEE D Y,KIM H D,et al. An experimental and numerical study on hydrodynamic characteristics of horizontal annular type water-air ejector[J]. Journal of Mechanical Science and Technology,2012,26(9):2773-2781. [22] PARK S K,YANG H C. Experimental investigation on mixed jet and mass transfer characteristics of horizontal aeration process[J]. International Journal of Heat and Mass Transfer,2017,113:544-555. [23] VAN S E,SMITH J M. Surface entrainment of air by high velocity water jets[J]. Chemical Engineering Science,1973,28(5):1161-1168. [24] WANG X J,TANG L,JIANG Z. Numerical simulation of Venturi ejector reactor in yellow phosphorus purification system[J]. Nuclear Engineering and Design,2014,268:18-23. [25] YUAN G,ZHANG L,ZHANG H,et al. Numerical and experimental investigation of performance of the liquid-gas and liquid jet pumps in desalination systems[J]. Desalination,2011,276(1/2/3):89-95. [26] KANDAKURE M,GAIKAR V,PATWARDHAN A. Hydrodynamic aspects of ejectors[J]. Chemical Engineering Science,2005,60(22):6391-6402. [27] BHUTADA S,PANGARKAR V. Gas induction and hold-up characteristics of liquid jet loop reactors[J]. Chemical Engineering Communications,1987,61(1/2/3/4/5/6):239-258. [28] KIM O S,LEE Y,LEE D H. Hydrodynamic characteristics of a horizontal flow ejector in a rectangular chamber[J]. Korean Journal of Chemical Engineering,2009,26(1):288-294. [29] HAVELKA P,LINEK V,SINKULE J,et al. Effect of the ejector configuration on the gas suction rate and gas hold-up in ejector loop reactors[J]. Chemical Engineering Science,1997,52(11):1701-1713. [30] YADAV R L,PATWARDHAN A W. Design aspects of ejectors:effects of suction chamber geometry[J]. Chemical Engineering Science,2008,63(15):3886-3897. [31] SAMAD A,OMAR R,HEWAKANDAMBY B,et al. Swirl induced flow through a venturi-ejector[C]//FORA. Proceedings of the ASME 2012 Fluids Engineering Summer Meeting. USA:American Society of Mechanical Engineers,2012:65-70. [32] RAHMAN F,UMESH D B,SUBBARAO D,et al. Enhancement of entrainment rates in liquid-gas ejectors[J]. Chemical Engineering and Processing,2010,49(10):1128-1135. [33] ZHU Y H,JIANG P X. Bypass ejector with an annular cavity in the nozzle wall to increase the entrainment:experimental and numerical validation[J]. Energy,2014,68:174-181. [34] BAGATUR T. Technical note:minimal conditions for venturi aeration of water flows[J]. Water Management,2005,158(3):127-130. [35] OZKAN F,OZTURK M,BAYLAR A. Experimental investigations of air and liquid injection by Venturi tubes[J]. Water and Environment Journal,2006,20(3):114-122. [36] BAYLAR A,OZKAN F,UNSAL M. On the use of venturi tubes in aeration[J]. Clean-Soil Air Water,2007,35(2):183-185. [37] BAYLAR A,OZKAN F,UNSAL M. Effect of air inlet hole diameter of Venturi tube on air injection rate[J]. KSCE Journal of Civil Engineering,2010,14(4):489-492. [38] BAYLAR A,UNSAL M,OZKAN F. Determination of the optimal location of the air hole in venturi aerators[J]. Clean-Soil Air Water,2007,35(3):246-249. [39] TANG J B,ZHANG Z Y,LI L Y,et al. Influence of driving fluid properties on the performance of liquid-driving ejector[J]. International Journal of Heat and Mass Transfer,2016,101:20-26. [40] CRAMERS P,VAN D L,BEENACKERS A. Influence of the gas density on the gas entrainment rate and gas hold-up in loop-Venturi reactors[J]. Chemical Engineering Science,1992,47(9/10/11):2251-2256. [41] FONTE C P,PINHO B S,SANTOS M V,et al. Prediction of the induced gas flow rate from a self-inducing impeller with CFD[J]. Chemical Engineering & Technology,2014,37(4):571-579. [42] FORRESTER S E,RIELLY C D,CARPENTER K J. Gas-inducing impeller design and performance characteristics[J]. Chemical Engineering Science,1998,53(4):603-615. [43] JOHNSON B D,GERSHEY R M,COOKE R C,et al. A theoretical model for bubble formation at a frit surface in a shear field[J]. Separation Science & Technology,1982,17(8):1027-1039. [44] SUN L C,MO Z Y,ZHAO L,et al. Characteristics and mechanism of bubble breakup in a bubble generator developed for a small TMSR[J]. Annals of Nuclear Energy,2017,109:69-81. [45] TIKHOMIROV V. On the breakage of drops in a turbulent flow[M]. Germany:Springer Netherlands,1991:339-343. [46] HINZE J. Fundamentals of the hydrodynamic mechanism of splitting in dispersion processes[J]. AIChE Journal,1955,1(3):289-295. [47] KRESS T. Mass transfer between small bubbles and liquids in concurrent turbulent pipe flow[D]. Tennessee:University of Tennessee,1972. [48] NAGAHIRO J,IWAMOTO J,HIGUCHI K. Experiments for fine air bubble production in liquids using ejectors[J]. Transactions of the ASAE,1992,35(5):1581-1590. [49] 唐文偲,阎昌琪,孙立成,等. 文丘里式气泡发生器气泡碎化特性研究[J]. 原子能科学技术,2014,48(5):844-848. TANG Wencai,YAN Changqi,SUN Licheng,et al. Characteristic of bubble breakup in Venturi-type bubble generator[J]. Atomic Energy Science and Technology,2014,48(5):844-848. [50] UNYAPHAN S,TARNPRADAB T,TAKAHASHI F,et al. Improvement of tar removal performance of oil scrubber by producing syngas microbubbles[J]. Applied Energy,2017,205:802-812. [51] 颜攀,黄正梁,王靖岱,等. 文丘里气泡发生器的气泡尺寸及分布[J]. 浙江大学学报(工学版),2017,51(10):2070-2076. YAN Pan,HUANG Zhengliang,WANG Jingdai,et al. Bubble size and its distribution for Venturi bubble generator[J]. Journal of Zhejiang University(Engineering Science),2017,51(10):2070-2076. [52] YIN J L,LI J J,LI H,et al. Experimental study on the bubble generation characteristics for an Venturi type bubble generator[J]. International Journal of Heat and Mass Transfer,2015,91:218-224. [53] GORDIYCHUK A,SVANERA M,BENINI S,et al. Size distribution and Sauter mean diameter of micro bubbles for a Venturi type bubble generator[J]. Experimental Thermal and Fluid Science,2016,70:51-60. [54] FUJIWARA A,OKAMOTO K,HASHIGUCHI K,et al. Bubble breakup phenomena in a venturi tube[C]//ASME/JSME 20075th Joint Fluids Engineering Conference. California,USA:Fluids Engineering Division,2007:553-560. [55] ZHAO L,MO Z,SUN L,et al. A visualized study of the motion of individual bubbles in a Venturi-type bubble generator[J]. Progress in Nuclear Energy,2017,97:74-89. [56] 莫政宇,杜敏,孙立成,等. 低含气率条件下文丘里管气泡发生器内气泡碎裂过程研究[J]. 核动力工程,2016,37(6):41-44. MO Zhengyu,DU Min,SUN Licheng,et al. Investigation on bubble breakup in a Venturi-tube bubble generator under low gas fraction condition[J]. Nuclear Power Engineering,2016,37(6):41-44. [57] 莫政宇,杜敏,邵梓一,等. 文丘里式气泡发生器内气泡输运过程研究[J]. 原子能科学技术,2016,50(6):1034-1039. MO Zhengyu,DU Min,SHAO Ziyi,et al. Investigation of bubble transportation in Venturi-type bubble generator[J]. Atomic Energy Science and Technology,2016,50(6):1034-1039. [58] SHARMA D V,PATWARDHAN A W,RANADE V V. Estimation of gas induction in jet loop reactors:influence of nozzle designs[J]. Chemical Engineering Research and Design,2017,125:24-34. [59] KIM M I,KIM O S,LEE D H,et al. Numerical and experimental investigations of gas-liquid dispersion in an ejector[J]. Chemical Engineering Science,2007,62(24):7133-7139. [60] MANNINEN M,TAIVASSALO V,KALLIO S. On the mixture model for multiphase flow[M]. Finland:VTT Publications,1996:1-67. [61] 张立英,黄青山. 气升式环流反应器的理论研究进展[J]. 过程工程学报,2011,11(1):162-173. ZHANG Liying,HUANG Qingshan. Research progress in the modeling theory of airlift loop reactor[J]. The Chinese Journal of Process Engineering,2011,11(1):162-173. [62] HUANG Q S,YANG C,YU G Z,et al. 3-D simulations of an internal airlift loop reactor using a steady two-fluid model[J]. Chemical Engineering & Technology,2007,30(7):870-879. [63] HUANG Q S,YANG C,YU G Z,et al. Sensitivity study on modeling an internal airlift loop reactor using a steady 2D two-fluid model[J]. Chemical Engineering & Technology,2008,31(12):1790-1798. [64] HUANG Q S,YANG C,YU G Z,et al. CFD simulation of hydrodynamics and mass transfer in an internal airlift loop reactor using a steady two-fluid model[J]. Chemical Engineering Science,2010,65(20):5527-5536. [65] ALIYU A M,KIM Y K,CHOI S H,et al. Development of a dual optical fiber probe for the hydrodynamic investigation of a horizontal annular drive gas/liquid ejector[J]. Flow Measurement & Instrumentation,2017,56:45-55. [66] WANG T F,WANG J F,JIN Y. Population balance model for gas-liquid flows:influence of bubble coalescence and breakup models[J]. Industrial & Engineering Chemistry Research,2005,44(19):7540-7549. [67] TINGE J,CASADO A R. Influence of pressure on the gas hold-up of aqueous activated carbon slurries in a down flow jet loop reactor[J]. Chemical Engineering Science,2002,57(17):3575-3580. |
[1] | WANG Yunfei, QIN Rui, ZHENG Lijun, LI Yan, LI Qingping. Research progress of rotating packed bed simulation through CFD method [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 1-9. |
[2] | WANG Tai, SU Shuo, LI Shengrui, MA Xiaolong, LIU Chuntao. Dynamic behavior of single bubble attached to the solid wall in the AC electric field [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 133-141. |
[3] | SHENG Weiwu, CHENG Yongpan, CHEN Qiang, LI Xiaoting, WEI Jia, LI Linge, CHEN Xianfeng. Operating condition analysis of the microbubble and microdroplet dual-enhanced desulfurization reactor [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 142-147. |
[4] | ZHAO Chen, MIAO Tianze, ZHANG Chaoyang, HONG Fangjun, WANG Dahai. Heat transfer characteristics of ethylene glycol aqueous solution in slit channel under negative pressure [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 148-157. |
[5] | SUN Jipeng, HAN Jing, TANG Yangchao, YAN Bowen, ZHANG Jieyao, XIAO Ping, WU Feng. Numerical simulation and optimization of operating parameters of sulfur wet molding process [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 189-196. |
[6] | YANG Hanyue, KONG Lingzhen, CHEN Jiaqing, SUN Huan, SONG Jiakai, WANG Sicheng, KONG Biao. Decarbonization performance of downflow tubular gas-liquid contactor of microbubble-type [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 197-204. |
[7] | CHEN Kuangyin, LI Ruilan, TONG Yang, SHEN Jianhua. Structure design of gas diffusion layer in proton exchange membrane fuel cell [J]. Chemical Industry and Engineering Progress, 2023, 42(S1): 246-259. |
[8] | LUO Cheng, FAN Xiaoyong, ZHU Yonghong, TIAN Feng, CUI Louwei, DU Chongpeng, WANG Feili, LI Dong, ZHENG Hua’an. CFD simulation of liquid distribution in different distributors in medium-low temperature coal tar hydrogenation reactor [J]. Chemical Industry and Engineering Progress, 2023, 42(9): 4538-4549. |
[9] | BU Zhicheng, JIAO Bo, LIN Haihua, SUN Hongyuan. Review on computational fluid dynamics (CFD) simulation and advances in pulsating heat pipes [J]. Chemical Industry and Engineering Progress, 2023, 42(8): 4167-4181. |
[10] | XI Yonglan, WANG Chengcheng, YE Xiaomei, LIU Yang, JIA Zhaoyan, CAO Chunhui, HAN Ting, ZHANG Yingpeng, TIAN Yu. Research progress on the application of micro/nano bubbles in anaerobic digestion [J]. Chemical Industry and Engineering Progress, 2023, 42(8): 4414-4423. |
[11] | CHEN Weiyang, SONG Xin, YIN Yaran, ZHANG Xianming, ZHU Chunying, FU Taotao, MA Youguang. Effect of liquid viscosity on bubble interface in the rectangular microchannel [J]. Chemical Industry and Engineering Progress, 2023, 42(7): 3468-3477. |
[12] | ZHANG Kai, JIN Hanyu, LIU Siyu, WANG Shuai. Simulation of mass transfer process under the bubble interaction in bubbling fluidization [J]. Chemical Industry and Engineering Progress, 2023, 42(6): 2828-2835. |
[13] | LIU Houli, GU Zhonghao, YANG Kang, ZHANG Li. Effect of groove width on pool boiling heat transfer characteristics in 3D printing groove structure [J]. Chemical Industry and Engineering Progress, 2023, 42(5): 2282-2288. |
[14] | PANG Liping, YUAN Hu, QIU Wensheng, DUAN Liqiang, LI Wenxue. Hydrodynamic characteristics during peaking operation in utility boiler [J]. Chemical Industry and Engineering Progress, 2023, 42(4): 1708-1718. |
[15] | YAN Xingqing, DAI Xingtao, YU Jianliang, LI Yue, HAN Bing, HU Jun. Research progress of high-pressure hydrogen leakage and jet flow [J]. Chemical Industry and Engineering Progress, 2023, 42(3): 1118-1128. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||
京ICP备12046843号-2;京公网安备 11010102001994号 Copyright © Chemical Industry and Engineering Progress, All Rights Reserved. E-mail: hgjz@cip.com.cn Powered by Beijing Magtech Co. Ltd |