Chemical Industry and Engineering Progress ›› 2017, Vol. 36 ›› Issue (07): 2497-2503.DOI: 10.16085/j.issn.1000-6613.2017-0104

Previous Articles     Next Articles

Synthesis of poly (ionic liquid) s solid acid catalyst and its catalytic performance in glycerol acetylation

ZHANG LÜhong, WANG Ruijin, JIANG Bin, SUN Yongli, YANG Huawei   

  1. School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, China
  • Received:2017-01-17 Revised:2017-04-18 Online:2017-07-05 Published:2017-07-05

聚离子液体固体酸催化剂的制备及催化甘油乙酰化性能

张吕鸿, 王瑞瑾, 姜斌, 孙永利, 杨华伟   

  1. 天津大学化工学院, 天津 300072
  • 通讯作者: 杨华伟,讲师,研究方向为聚合物基催化剂的制备及应用。
  • 作者简介:张吕鸿(1966-),女,博士,教授,研究方向为化工传质与分离及过程强化。E-mail:zhanglvh@tju.edu.cn。

Abstract: A functional poly (ionic liquid) s (PILs) solid acid catalyst was prepared through free radical copolymerization of ionic liquids precursor and the subsequent protonation and ion-exchange with concentrated sulfuric acid.The as-prepared acidic catalyst was characterized by FTIR,SEM,TEM,XPS,TGA,elemental analysis and potentiometric titration.It was found that the acid PILs had a multi-layer microstructure with favorable thermal stability and high Brønsted acid site density.Its performance was evaluated in the acetylation of glycerol without any water-carrying agent.It exhibited high catalytic activity and selectivity.Glycerol conversion of 98.2%,monoacetin selectivity of 11.6% and total diacetin and triacetin selectivity of 88.4% were obtained under the optimum reaction conditions of n(acetic acid):n(glycerol)=6,catalyst dosage=4% of glycerol,120℃,4h.The catalytic performance was better than that using Amberlyst-15.The PILs solid acid catalyst was easily recovered and had good hydrothermal stability.A further exchanging of used PILs with H2SO4 could make the catalyst restore its catalytic performance and it could be reused for 4 times.

Key words: catalyst, polymerization, ionic liquids, selectivity, glycerol, acetylation

摘要: 通过自由基共聚,质子化及离子交换两步法合成聚咪唑基离子液体固体酸催化剂(PILs)。采用傅里叶红外光谱(FTIR)、扫描电镜(SEM)、透射电镜(TEM)、X射线光电子能谱分析(XPS)、热重分析(TGA)、元素分析和电位滴定的方法对该催化剂的结构和性能进行了表征。结果表明该催化剂具有层状结构、良好的热稳定性和较高的质子酸浓度,并在不加入带水剂的条件下,考察了该聚离子液体固体酸催化剂对甘油乙酰化反应的催化作用。结果表明该PILs固体酸催化剂具有良好的选择催化活性,在酸醇摩尔比为6:1、催化剂用量4%(质量分数)、120℃、4h的最优条件下,甘油转化率达98.2%,单乙酸甘油酯的选择性为11.6%,二乙酸甘油酯和三乙酸甘油酯的总选择性高达88.4%,优于Amberlyst-15的催化效果。该催化剂易回收,具有良好的水热稳定性,且重复使用4次经再生后仍能保持良好的选择催化活性。

关键词: 催化剂, 聚合, 离子液体, 选择性, 甘油, 乙酰化

CLC Number: 

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd