Chemical Industry and Engineering Progree ›› 2015, Vol. 34 ›› Issue (05): 1207-1214.DOI: 10.16085/j.issn.1000-6613.2015.05.004

Previous Articles     Next Articles

Development of split mechanical seal technology and discussions of key issues

HU Qiong1, SUN Jianjun1, TU Qiaoan1, MA Chenbo1, HE Binhui1, LIU Ping2   

  1. 1. School of Mechanical and Electronic Engineering, Nanjing Forestry University, Nanjing 210037, Jiangsu, China;
    2. Nanjing Dingxin Light Industrial Products Co., Ltd., Nanjing 210036, Jiangsu, China
  • Received:2014-09-29 Revised:2014-10-16 Online:2015-05-05 Published:2015-05-05

剖分式机械密封技术研究现状及关键问题探讨

胡琼1, 孙见君1, 涂桥安1, 马晨波1, 何斌辉1, 刘平2   

  1. 1. 南京林业大学机械电子工程学院, 江苏 南京 210037;
    2. 南京鼎鑫轻工制品有限公司, 江苏 南京 210036
  • 通讯作者: 孙见君,教授,博士生导师.E-mailsunjianjun@njfu.edu.cn.
  • 作者简介:胡琼(1989—),女,博士研究生.
  • 基金资助:

    国家自然科学基金(51375245)、南京市科技型中小企业技术创新基金项目(2012创基026)及南京林业大学优秀博士学位论文创新基金项目及江苏省第十批六大人才高峰资助项目(ZBZZ-037).

Abstract: This paper summarized the split mechanical seal structure design and theoretical research status. Sealing ways of parting interface include sealing by connecting natural fractures,sealing with elastic gasket filled in pit and sealing through smoothing parting surfaces;location modes of parting surfaces are divided into five types,locating respectively by connecting fractures,external force compressing,locating elements,seats of seal rings and installation tools;fracture connections of split elastic auxiliary seal ring contain overlapping connection,inserting connection,buckling connection and the connection with standard elastic seal rings. This article further indicated that there are still some problems in the split mechanical seal field,such as suboptimal structure design,little theoretical research,imprecise measurements,no performance criteria and improper manufacturing technology. This article suggested possible solutions to the problems mentioned above. Establishing design method,enacting performance criteria and exploit effective measurement methods and feasibly efficient manufacturing process should be considered based on the development of theoretical temperature,deformation and leakage models of split mechanical seal.

Key words: split mechanical seal, structure design, parting surface, deformation, measurement method

摘要: 对近几十年国内外剖分式机械密封的结构设计及理论研究状况进行了综述性研究,分析归纳得出:剖分面密封形式包括自然断口连接密封、填充密封垫密封以及光滑面接触密封;定位方式分为断口搭接定位、外力辅助定位、定位件辅助定位、密封环座定位以及安装工具辅助定位;剖分式弹性辅助密封圈则通过搭接式、插接式、扣式以及标准件组合式连接形成整环.深入分析表明:剖分式机械密封技术领域还存在结构设计不够优、理论研究不够深、测量方法不够准、性能指标未定制和制造技术需提高等问题,通过开展剖分式机械密封端面温度、变形及泄漏模型研究,建立设计方法,制定性能指标,开发有效的测试技术和高效可行的制造工艺,是解决上述问题的关键,也是未来一段时间的主要任务.

关键词: 剖分式机械密封, 结构设计, 剖分面, 变形, 测量方法

CLC Number: 

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd