1 |
薛国宏, 曹明, 沈睿, 等. 反应堆压力容器国产O形环密封性能分析[J]. 压力容器, 2016, 33(3): 16-20.
|
|
XUE Guohong, CAO Ming, SHEN Rui, et al. Performance research on domestic O-ring of reactor pressure vessel[J]. Pressure Vessel Technology, 2016, 33(3): 16-20.
|
2 |
沈明学, 李文静, 谢林君, 等. 反应堆压力容器法兰面沟槽尺寸参数对其金属O形环密封性能的影响[J]. 原子能科学技术, 2016, 50(3): 516-523.
|
|
SHEN Mingxue, LI Wenjing, XIE Linjun, et al. Effect of groove dimension parameter of flange face on sealing performance of metal O-ring for reactor pressure vessel[J]. Atomic Energy Science and Technology, 2016, 50(3): 516-523.
|
3 |
张文昌, 励行根, 魏世军, 等. 金属O形环力学性能仿真分析与试验验证[J]. 润滑与密封, 2019, 44(8): 8-12.
|
|
ZHANG Wenchang, LI Xinggen, WEI Shijun, et al. Simulation analysis and test validation of mechanical properties of metallic O-ring[J]. Lubrication Engineering, 2019, 44(8): 8-12.
|
4 |
段成红, 刘镇溪, 罗翔鹏. 压力容器活套法兰连接中金属O形密封环接触特性研究[J]. 中国化工装备, 2022, 24(6): 36-42.
|
|
DUAN Chenghong, LIU Zhenxi, LUO Xiangpeng. Contact characteristics of metal O-ring in looped flange connection of pressure vessel[J]. China Chemical Industry Equipment, 2022, 24(6): 36-42.
|
5 |
刘艳军, 吴国凤. 金属O形环密封结构的泄漏模型研究[J]. 润滑与密封, 2019, 44(9): 19-24.
|
|
LIU Yanjun, WU Guofeng. Research on leakage model of metal O-ring seal structure[J]. Lubrication Engineering, 2019, 44(9): 19-24.
|
6 |
郭飞, 黄毅杰, 励行根, 等. 非圆金属O形环装配预紧过程仿真模拟[J]. 润滑与密封, 2020, 45(10): 1-6.
|
|
GUO Fei, HUANG Yijie, LI Xinggen, et al. Simulation of pre-tightening process of non-circular metal O-ring assembly[J]. Lubrication Engineering, 2020, 45(10): 1-6.
|
7 |
KOBAYASHI T. Deformation characteristics of a metal hollow O-ring[C]//Analysis of Bolted Joints 1999: The 1999 ASME Pressure Vessels and Piping Conference Boston. Massachusetts: American Society of Mechanical Engineers, 1999: 103-111.
|
8 |
KIM G H, LEE Y S, YANG H L. Compliant mechanism topology optimization of metal O-ring[J]. Transactions of the Korean Society of Mechanical Engineers A, 2013, 37(4): 537-545.
|
9 |
KIM G H, LEE Y S, YANG H L. A new design concept of metal O-ring seal for long-term performance[J]. Vacuum, 2016, 123: 54-61.
|
10 |
QIAO Linan, KELLER Christian, ZENCKER Uwe, et al. Three-dimensional finite element analysis of O-ring metal seals considering varying material properties and different seal diameters[J]. International Journal of Pressure Vessels and Piping, 2019, 176: 103953.
|
11 |
SHINOHARA M, KUGO T, ÔNO K. Superleak-tight stainless steel hollow O-ring seals for cryogenic use[J]. Cryogenics, 1980, 20(7): 418-419.
|
12 |
赵丽娜. 反应堆压力容器金属O形密封环的数值模拟与试验研究[D]. 杭州: 浙江工业大学, 2014.
|
|
ZHAO Lina. Numerical simulation and experimental study of RPV metal O-ring[D]. Hangzhou: Zhejiang University of Technology, 2014.
|
13 |
余伟炜, 蔡力勋, 叶裕明, 等. Inconel718合金O形环回弹特性研究[J]. 工程力学, 2006, 23(6): 142-147.
|
|
YU Weiwei, CAI Lixun, YE Yuming, et al. Springback properties of inconel718 alloy O-ring[J]. Engineering Mechanics, 2006, 23(6): 142-147.
|
14 |
蔡云辉. 基于有限元法的碟式分离机转鼓组件强度分析与评定[D]. 合肥: 合肥工业大学, 2012.
|
|
CAI Yunhui. Strength analysis and evaluation of the disc separator drum components based on finite element method[D]. Hefei: Hefei University of Technology, 2012.
|
15 |
石亦平, 周玉蓉. ABAQUS有限元分析实例详解[M]. 北京: 机械工业出版社, 2006.
|
|
SHI Yiping, ZHOU Yurong. Detailed explanation of ABAQUS finite element analysis example[M]. Beijing: China Machine Press, 2006.
|