1 | 陈俊武, 许友好. 催化裂化工艺与工程(下册)[M]. 第3版. 北京:中国石化出版社, 2015: 917-920. | 1 | CHEN Junwu, XU Youhao. Catalytic cracking process and engineering(part II)[M]. 3rd ed. Beijing: Sinopec Press, 2015: 917-920. | 2 | 卢春喜, 王祝安. 催化裂化流态化技术[M]. 北京: 中国石化出版社, 2002: 120-122. | 2 | LU Chunxi, WANG Zhuan. Catalytic cracking fluidization technology[M]. Beijing: Sinopec Press, 2002: 120-122. | 3 | 魏耀东, 刘仁恒, 孙国刚, 等. 负压差立管内气固流动的不稳定性实验分析[J]. 过程工程学报, 2003, 3(6): 493-497. | 3 | WEI Yaodong, LIU Renhuan, SUN Guogang, et al. Instability analysis on gas-solid two-phase in the standpipe under negative pressure gradient in circulating fluidized bed[J]. Chinese Journal of Process Engineering, 2003, 3(6): 493-497. | 4 | 罗保林, 宗祥荣, 王中礼, 等. 垂直立管中催化剂流动特性的实验研究[J]. 过程工程学报, 2005, 5(2): 119-124. | 4 | LUO Baolin, ZONG Xiangrong, WANG Zhongli, et al. Experimental study on flow characteristics of catalyst in the standpipe[J]. Chinese Journal of Process Engineering, 2005, 5(2): 119-124. | 5 | 邢颖春, 卢春喜. 某催化裂化装置催化剂循环管线松动点的改造[J]. 石化技术与应用, 2008, 26(1): 49-54. | 5 | XING Yingchun, LU Chunxi. Revampment on distribution of aeration orifice in catalyst circulation pipe of a fluidized catalyst cracking plant[J]. Petrochemical Technology& Application, 2008, 26(1): 49-54. | 6 | 李玉飞, 王明东, 侯玉宝. R2R型催化裂化装置流化问题探究[J]. 炼油技术与工程, 2019, 49(12): 29-32. | 6 | LI Yufei, WANG Mingdong, HOU Yubao. Research on fluidization problem in R2R FCC unit[J]. Petroleum Refinery Engineering, 2019, 49(12): 29-32. | 7 | 严超宇, 魏志刚, 宋健菲, 等. 半再生立管输送催化剂不畅的原因分析和改进措施[J]. 石油炼制与化工, 2017, 48(9): 75-77. | 7 | YAN Chaoyu, WEI Zhigang, SONG Jianfei, et al. Analysis of catalyst conveying fault in semi-regenerative standpipe of FCCU and related measures[J]. Petroleum Processing and Petrochemicals, 2017, 48(9): 75-77. | 8 | SUNG W K, DOYEON L. Effect of fines content on fluidity of FCC catalysts for stable operation of fluid catalytic cracking unit[J]. Energies, 2019, 12: 293-303. | 9 | YUKI H, TAKAMI K. Decrease in the fluidization quality of fluidized beds containing binary mixtures of different catalyst particles[J]. Chemical Engineering Science[J]. 2013, 96: 98-105. | 10 | GELDART D, RADTKE A. The effect of particle properties on the behaviour of equilibrium cracking catalyst in standpipe flow[J]. Powder Technology, 1986, 47: 157-165. | 11 | 严超宇, 王迪, 贾梦达, 等. 催化裂化装置立管输送催化剂异常原因分析[J]. 石油学报(石油加工), 2018, 34(1): 94-100. | 11 | YAN Chaoyu, WANG Di, JIA Mengda, et al. Cause analysis of catalyst conveying fault in standpipe of FCC units[J]. Acta Petrolei Sinica (Petroleum Processing Section), 2018, 34(1): 94-100. | 12 | LEUNG L S, JONES P J. Flow of gas-solid mixtures in standpipes:a review[J]. Powder Technology, 1978, 20: 145-160. | 13 | 李洪钟. 立管移动床气固流动相图及理想料封状态[J]. 化学工程, 1989, 17(5): 28-34. | 13 | LI Hongzhong. Gas-solid flow phase diagram of standpipe moving bed and ideal material seal state[J]. Chemical Engineering, 1989, 17(5): 28-34. | 14 | 王创博, 石睿捷, 马玲, 等. 斜管内FCC催化剂流态与阀门开度关系的实验研究[J]. 石油学报(石油加工), 2019, 35(1): 146-152. | 14 | WANG Chuangbo, SHI Ruijie, MA Ling, et al. Experimental study on the relationship between FCC catalyst flow pattern and butterfly valve open ratio in the inclined pipe[J]. Acta Petrolei Sinica (Petroleum Processing Section), 2019, 35(1): 146-152. | 15 | 曹晓阳, 孔文文, 魏耀东, 等. FCC催化剂在45°斜管内下料特性的实验分析[J]. 石油学报(石油加工), 2016, 32(6): 1113-1120. | 15 | CAO Xiaoyang, KONG Wenwen, WEI Yaodong, et al. An experimental analysis of flow characteristics of FCC catalyst in the 45° inclined standpipe[J]. Acta Petrolei Sinica (Petroleum Processing Section), 2016, 32(6): 1113-1120. | 16 | 曹晓阳, 周发戚, 陈勇, 等. 循环流化床颗粒输送斜管的压力脉动特性[J]. 石油学报(石油加工), 2016, 32(5): 913-920. | 16 | CAO Xiaoyang, ZHOU Faqi, CHEN Yong, et al. Characteristics of pressure fluctuations in the particle-transport inclined standpipe of a circulating fluidized bed[J]. Acta Petrolei Sinica (Petroleum Processing Section), 2016, 32(5): 913-920. | 17 | LEUNG L S, WILSON L A. Downflow of solids in standpipes[J]. Powder Technology, 1973, 7: 343-349. |
|