不同工质下带蒸汽腔的Ω形微通道热沉特性

doi:10.16085/j.issn.1000-6613.2017-2401

化工进展 ›› 2018, Vol. 37 ›› Issue (08): 2954-2961.DOI: 10.16085/j.issn.1000-6613.2017-2401

不同工质下带蒸汽腔的Ω形微通道热沉特性

张添^1,2, 王仕越^1,2, 芮骥才^1,2, 董德平¹, 谢荣建¹

1 中国科学院上海技术物理研究所, 上海 200083;
2 中国科学院大学, 北京 100049

收稿日期:2017-11-21 修回日期:2018-01-17 出版日期:2018-08-05 发布日期:2018-08-05
通讯作者: 董德平,研究员,博士生导师,研究方向为空间载荷先进热管理技术。
作者简介:张添(1992-),女,博士研究生,研究方向为高热流密度散热技术。E-mail:tiansblue@qq.com。

Characteristic of an Ω-shape microchannel heatsink with different working fluid

ZHANG Tian^1,2, WANG Shiyue^1,2, RUI Jicai^1,2, DONG Deping¹, XIE Rongjian¹

1 Shanghai Institute of Technical Physics, Chinese Academy of Sciences, Shanghai 200083, China;
2 University of Chinese Academy of Sciences, Beijing 100049, China

Received:2017-11-21 Revised:2018-01-17 Online:2018-08-05 Published:2018-08-05

摘要/Abstract

摘要： 借鉴轴向槽道热管结构在工作时良好的气、液分离工作特性，本文提出了一种带蒸汽腔的复合微通道热沉，用以解决大面积或高热流能量收集时热沉通道内部由于排气不畅易导致气塞和返流现象，进而出现流动沸腾不稳定性问题和传热恶化的问题。热沉底板包含20个Ω形平行通道，肋顶端与盖板下表面间形成连通的蒸汽腔作为两相流时的气体流道。实验以无水乙醇、Novec HFE 7100为工质，并结合可视化观测对热沉性能进行了研究，可以观察到随加热热流密度逐步增加，热沉内部工质依次经强制对流到过冷沸腾、核态沸腾，并最终达到过渡沸腾，可视化实验结果与温度测量结果相吻合。当使用乙醇为工质，在入口质量流速q_m=280.37kg/（m²·s）、加热热流密度q_eff=30.32W/cm²时，最大传热系数为9494W/（m·℃）。此种结构在有效地保证了热沉换热效果的同时，通过分离气、液流道对抑制流动沸腾不稳定性有明显效果。

关键词: 高热流密度散热, 微通道, 气液两相流, 流动沸腾不稳定性

Abstract: A hybrid microchannel/grooved heat pipes heatsink was designed based on excellent characteristics of gas and liquid flow separation in axial grooved heat pipes at work. The heatsink contains 20 Ω-shape parallel channels on the substrate, and the zone between top sides of the ribs and the bottom side of the glass cover plate forms a vapor chamber in boiling condition. The structure was designed to remit the instability boiling problems such as gas plunger and vapor return symptoms in large-size or high heat flux dissipation conditions. The experiments were divided into two main parts:visualization experiments and heat transfer performance test with the usage of a digital camera and a data acquisition system. Absolute ethyl alcohol and 3M Novec HFE 7100 electronic coolant were used as working fluid in all experiments. The two variables of effective input heat flux q_eff and mass flux q_m were respectively controlled by voltage and electric current of the direct-current source and indirectly controlled by the control voltage of the micro gear pump. The range of q_eff was 0-30.32W/cm² and the range of q_m was 280.37(534.5)-533.26(807.22)kg/(m²·s) for C₂H₅OH(HFE 7100). To maintain same coolant properties, the inlet fluid temperature was kept at 20℃ by the cooling machine. Visualization experiments indicated that the boiling regimes from onset boiling state in low heat flux to nuclear boiling match well with the measuring temperature. The experimental results showed that, when q_m=280.37kg/(m²·s)、q_eff=30.32W/cm², the max heat transfer coefficient is 9494W/(m·℃);the coolant vapor can easily escapes from the top side of channels in fully developed boiling condition so that this design can control the instability boiling problems caused by vapor plunger effectively.

Key words: high heat flux dissipation, microchannel, gas-liquid flow, flow boiling instability

中图分类号:

TK124

张添, 王仕越, 芮骥才, 董德平, 谢荣建. 不同工质下带蒸汽腔的Ω形微通道热沉特性[J]. 化工进展, 2018, 37(08): 2954-2961.

ZHANG Tian, WANG Shiyue, RUI Jicai, DONG Deping, XIE Rongjian. Characteristic of an Ω-shape microchannel heatsink with different working fluid[J]. Chemical Industry and Engineering Progress, 2018, 37(08): 2954-2961.

参考文献

[1] TUCKERMAN D B, PEASE R F W. High performance heat sink for VISI[J]. IEEE Electron, 1981, 4:126-129.
[2] KADAM S T, KUMAR R. Twenty first century cooling solution:microchannel heat sinks[J]. International Journal of Thermal Sciences, 2014, 85:73-92.
[3] 刘用鹿. 高效微小通道热沉散热系统设计及其实验研究[D]. 武汉:华中科技大学, 2010. LIU Yonglu. System design and experimental investigation of high performance minichannel heatsink cooling system[D]. Wuhan:Huazhong University of Science and Technology, 2010.
[4] 夏国栋, 徐志波, 齐景智. 周期性变截面微通道热沉内流体流动与传热特性[J]. 航空动力学报, 2010, 25(1):6-10. XIA Guodong, XU Zhibo, QI Jingzhi. Flow and heat transfer characteristics in a periodical changeable cross-section micro-channel heat sink[J] Journal of Aerospace Power, 2010, 25(1):6-10.
[5] HUANG Shanbo, ZHAO Jin, GONG Liang, et al. Thermal performance and structure optimization for slotted microchannel heat sink[J]. Applied Thermal Engineering, 2017, 115:1266-1276.
[6] 洪芳军, 郑平, 常欧亮, 等. 树型微通道网络芯片热沉的试验研究[J]. 上海交通大学学报, 2009, 43(10):1649-1653. HONG F J, ZHENG P, CHANG O L, et al. Experimental study on a tree-shaped microchannel network heat sink for microelectronic cooling[J]. Journal of Shanghai Jiaotong University, 2009, 43(10):1649-1653.
[7] WANG H, CHEN Z, GAO J. Influence of geometric parameters on flow and heat transfer performance of micro-channel heat sinks[J]. Applied Thermal Engineering, 2016, 107:870-879.
[8] 吕凤勇, 马虎根, 何红萍, 等. 微通道内非共沸混合制冷剂的流动沸腾特性[J]. 化工进展, 2012, 31(7):1449-1453. LU Fengyong, MA Hugen, HE Hongping, et al. Investigation on flow boiling heat transfer of non-azeotropic refrigerant mixture in microchannel[J]. Chemical Industry and Engineering Progress, 2012, 31(7):1449-1453.
[9] 胡丽琴. 矩形微通道内R22制冷机流动沸腾压降特性及可视化研究[D]. 广州:华南理工大学, 2014. HU Liqin. Pressure drop and visualization of flow boiling of R22 in rectangular microchannels[D]. Guangzhou:South China University of Technology, 2014.
[10] ZHANG Yaxian, WANG Jintao, LIU Wei, et al. Heat transfer and pressure drop characteristics of R134a flow boiling in the parallel/tandem microchannel heat sinks[J]. Energy Conversion and Management, 2017, 148:1082-1095.
[11] SARAFRAZ M, NIKKHAH V, NAKHJAVANI M, et al. Fouling formation and thermal performance of aqueous carbon nanotube nanofluid in a heat sink with rectangular parallel microchannel[J]. Applied Thermal Engineering, 2017, 123:29-39.
[12] 王浩. 芯片微通道沸腾相变过程中流动交变现象探究[J]. 工程热物理学报, 2006, 27(2):61-64. WANG Hao. Study on alternating flow phenomena during flow boiling in silicon microchannels[J]. Journal of Engineering Thermophysics, 2006, 27(2):61-64.
[13] BERGLES A E, KANDLIKAR S G. On the nature of critical heat flux in microchannels[J]. Journal of Heat Transfer, 2005, 127(1):101-107.
[14] 郭健. 微通道内单相液体流动与传热特性研究[D]. 北京:北京交通大学, 2012. GUO Jian. Single phase liquid flow and heat transfer of microchannels[D]. Bejing:Beijing Jiaotong University, 2012.
[15] 王浩, 吴慧英, 郑平. 芯片微通道沸腾相变过程中流动交变现象探析[J]. 工程热物理学报, 2006, 27(2):61-64. WANG Hao, WU Huiying, ZHENG Ping. Study on alternating flow phenomena during flow boiling in silicon microchannels[J]. Journal of Engineering Thermophysics, 2006, 27(2):61-64.
[16] BERTSCH S S, GROLL E A, GARIMELLA S V. A composite heat transfer correlation for saturated flow boiling in small channels[J]. International Journal of Heat and Mass Transfer, 2009, 52(7):2110-2118.
[17] 刘国华. 微通道内种子汽泡抑制沸腾不稳定性研究[J]. 工程热物理学报, 2010(6):975-978. LIU Guohua. Seed bubbles stabilize flow boiling and heat transfer in microchannels[J]. Journal of Engineering Thermophysics, 2010(6):975-978.
[18] 宗露香, 徐进良, 王晓东, 等. 高热流作用下微通道内种子气泡热控沸腾传热数值模拟[J]. 机械工程学报, 2013, 49(14):125-132. ZONG Luxiang, XU Jinliang, WANG Xiaodong, et al. Numerical simulation of seed bubble thermal control microchannel boiling heat transfer under high heat flux[J]. Journal of Mechanical Engineering, 2013, 49(14):125-132.
[19] 陶汉中, 张红, 庄骏. 槽道吸液芯热管的研究进展[J]. 化工进展, 2010, 29(3):403-412. TAO Hanzhong, ZHANG Hong, ZHUANG Jun. Progress in the theoretical study on miniature axial grooved heat pipe[J]. Chemical Industry and Engineering Progress, 2010, 29(3):403-412.
[20] 张程宾, 施明恒, 陈永平, 等. "Ω"形轴向槽道热管的流动和传热特性[J]. 化工学报, 2008, 59(3):544-550. ZHANG Chengbin, SHI Mingheng, CHEN Yongping, et al. Flow and heat transfer characteristics of heat pipes with axial "Ω"-shaped grooves[J]. Journal of Chemical Industry and Engineering, 2008, 59(3):544-550.

不同工质下带蒸汽腔的Ω形微通道热沉特性

Characteristic of an Ω-shape microchannel heatsink with different working fluid

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	赵晨, 苗天泽, 张朝阳, 洪芳军, 汪大海. 负压状态窄缝通道乙二醇水溶液传热特性[J]. 化工进展, 2023, 42(S1): 148-157.
[2]	陈匡胤, 李蕊兰, 童杨, 沈建华. 质子交换膜燃料电池气体扩散层结构与设计研究进展[J]. 化工进展, 2023, 42(S1): 246-259.
[3]	卜治丞, 焦波, 林海花, 孙洪源. 脉动热管计算流体力学模型与研究进展[J]. 化工进展, 2023, 42(8): 4167-4181.
[4]	俞俊楠, 俞建峰, 程洋, 齐一搏, 化春键, 蒋毅. 基于深度学习的变宽度浓度梯度芯片性能预测[J]. 化工进展, 2023, 42(7): 3383-3393.
[5]	陈蔚阳, 宋欣, 殷亚然, 张先明, 朱春英, 付涛涛, 马友光. 矩形微通道内液相黏度对气泡界面的作用机制[J]. 化工进展, 2023, 42(7): 3468-3477.
[6]	陶梦琦, 刘美红, 康宇驰. 基于micro-PIV的微通道内流体绕流单微圆柱和并联双微圆柱流场特性[J]. 化工进展, 2023, 42(6): 2836-2844.
[7]	刘厚励, 顾中浩, 阳康, 张莉. 3D打印槽道结构槽宽对池沸腾传热特性的影响[J]. 化工进展, 2023, 42(5): 2282-2288.
[8]	庞力平, 袁虎, 丘文生, 段立强, 李文学. 深度调峰锅炉水动力特性分析[J]. 化工进展, 2023, 42(4): 1708-1718.
[9]	田启凯, 郑海萍, 张少斌, 张静, 余子夷. 混合增强的微流控通道进展[J]. 化工进展, 2023, 42(4): 1677-1687.
[10]	罗小平, 樊鹏, 周建阳, 王梦圆. 不同波纹壁面微细通道沸腾曲线及沸腾起始点研究[J]. 化工进展, 2023, 42(3): 1228-1239.
[11]	黄起中, 刘冰, 马红鹏, 吕文杰. 基于新型微通道分离技术的甲醇制烯烃废水处理[J]. 化工进展, 2023, 42(2): 669-676.
[12]	陈秋实, 郑辰, 张敏弟. 微通道反应器氯磷酸单丁酯与正丁醇酯化反应数值模拟[J]. 化工进展, 2022, 41(S1): 29-35.
[13]	张猛, 李树谦, 张东, 马坤茹. 微细通道内蒸汽直接接触间歇凝结汽液相界面运动特性[J]. 化工进展, 2022, 41(9): 4644-4652.
[14]	曾龙, 郑贵森, 邓大祥, 孙健, 刘永恒. 多孔壁面微通道换热性能的实验研究[J]. 化工进展, 2022, 41(9): 4625-4634.
[15]	冯龙龙, 钟珂, 张羽森, 商庆春, 贾洪伟. 水平管内R1234yf的流动沸腾换热特性[J]. 化工进展, 2022, 41(7): 3502-3509.