衣康酸及其衍生物反应挤出改性聚烯烃的研究进展

doi:10.16085/j.issn.1000-6613.2015.06.028

摘要/Abstract

摘要： 通过反应挤出的方式, 采用衣康酸及其衍生物对聚烯烃进行接枝改性, 可以显著改善材料性能, 特别是与其他高分子材料的相容性。本文从影响聚烯烃接枝改性的各个因素:聚烯烃类型、引发剂类型以及添加剂出发, 详细论述了国内外研究者的研究进展, 重点阐述了各个因素对聚烯烃改性机理、产物链结构的影响, 认为反应挤出接枝产物链段结构以及螺杆结构对反应挤出的影响这两方面值得进一步研究。

关键词: 衣康酸, 聚烯烃, 反应挤出, 聚合物加工

Abstract: Polyolefins modification by reactive extrusion with itaconic acid and derivatives can improve the performance of polymers, especially for its compatibility with other polymers. From the point of factors that impact graft reaction of polyolefins i.e. type of polyolefin, initiators and additives, the progress both at home and abroad was summarized. Modification mechanisms and structure of graft products were emphasized. Some problems and feasible research areas in this field, for example, the chain structure of graft products and the effect of screw profile on reactive extrusion, were worth further research.

Key words: itaconic acid, polyolefins, reactive extrusion, polymer processing

中图分类号:

TQ316.6

蒋波. 衣康酸及其衍生物反应挤出改性聚烯烃的研究进展[J]. 化工进展, 2015, 34(06): 1672-1678,1729.

JIANG Bo. Progress in polyolefins modification by reactive extrusion with itaconic acid and its derivatives[J]. Chemical Industry and Engineering Progree, 2015, 34(06): 1672-1678,1729.

参考文献

[1] Nwabunma D, Kyu T. Polyolefin Blends[M].New Jersey:Wiley-Interscience, 2007:1-18.
[2] Elisa P, Serena C, Francesca C. Some recent advances in polyolefin functionalization[J]. Polymer International, 2014, 63(1):12-21.
[3] Pouyan S, Costas T, Maria A P, et al. Radiation induced long chain branching in high-density polyethylene through a reactive extrusion process[J]. Macromolecular Reaction Engineering, 2014, 8(2):100-111.
[4] Francoise B, Jean-Jacques F, Bruno V. Grafting of maleic anhydride on polypropylene by reactive extrusion:Effect of maleic anhydride and peroxide concentrations on reaction yield and products characteristics[J]. Journal of Polymer Engineering, 2013, 33(8):673-682.
[5] 解英, 曹贤武, 朱旭, 等. PP/PA6/POE-g-MAH三元共混对聚丙烯熔体强度的影响[J]. 化工进展, 2010, 29(3):521-525.
[6] Passaglia E, Coiai S, Augier S. Control of macromolecular architecture during the reactive functionalization in the melt of olefin polymers[J]. Progress in Polymer Science, 2009, 34(9):911-947.
[7] Brandrup J, Immergut E H, Grulke E A. Polymer Handbook[M]. New York:John Wiley & Sons Inc, 2003:567-570.
[8] 吴智华, 沈经纬. 马来酸及其酐和衣康酸与PP熔体接枝反应机理的研究[J]. 高分子材料科学与工程, 1996, 12(3):34-39.
[9] 沈经纬, 吴智华. 衣康酸接枝PP对PA6/PP共混物增容作用机理的研究[J]. 高分子材料科学与工程, 1996, 12(5):111-117.
[10] Pesetskii S S, Jurkowski B, Krivoguz Y M, et al. Itaconic acid grafting on LDPE blended in molten state[J]. Journal of Applied Polymer Science, 1997, 65(8):1493-1502.
[11] Pesetskii S S, Jurkowski B, Krivoguz Y M, et al. Free-radical grafting of itaconic acid onto LDPE by reactive extrusion:I. Effect of initiator solubility[J]. Polymer, 2001, 42(2):469-475.
[12] Krivoguz Y M, Pesetskii S S, Jurkowski B. Grafting of itaconic acid onto LDPE by the reactive extrusion:Effect of neutralizing agents[J]. Journal of Applied Polymer Science, 2003, 89(3):828-836.
[13] 段良福, 李炳海. 低密度聚乙烯反应挤出接枝衣康酸的研究[J]. 塑料科技, 2007, 35(2):40-43.
[14] 朱文明, 刘喜军, 姜兆华, 等. 衣康酸-苯乙烯熔融接枝HDPE改性研究[J]. 齐齐哈尔大学学报, 2006, 22(5):10-15.
[15] Verbeek C J R, Hanipah S H. Grafting itaconic anhydride onto polyethylene using extrusion[J]. Journal of Applied Polymer Science, 2010, 116(6):3118-3126.
[16] Pesetskii S S, Jurkowski B, Makarenko O A. Free radical grafting of itaconic acid and glycidyl methacrylate onto PP initiated by organic peroxides[J]. Journal of Applied Polymer Science, 2002, 86(1):64-72.
[17] 吴智华, 沈经纬. 衣康酸接枝PP增容PA6/PP合金的研究[J]. 中国塑料, 1999, 13(8):45-50.
[18] Chen Q H, Deng Y, Mao X G. Preparation and reaction kinetics of polypropylene-graft-cardanol by reactive extrusion and its compatibilization on polypropylene/polystyrene[J]. Journal of Applied Polymer Science, 2014, 131(4):DOI:10.1002/app.39911.
[19] 刘喜军, 孟宪奎, 田瑞霞, 等. ITA熔融接枝PP防降解研究[J]. 齐齐哈尔大学学报, 2008, 24(2):28-33.
[20] Yazdani-Pedrama M, Vega H, Quijada R. Melt functionalization of polypropylene with methyl esters of itaconic acid[J]. Polymer, 2001, 42(10):4751-4758.
[21] Yazdani-Pedram M, Vega H, Retuert J, et al. Compatibilizers based on polypropylene grafted with itaconic acid derivatives. Effect on polypropylene/polyethylene terephthalate blends[J]. Polymer Engineering and Science, 2003, 43(4):960-964.
[22] Krivoguz Y M, Pesetskii S S. Free-radical grafting of methylenebutanedioic acid to polypropylene polyethylene blends and rheological properties of melts[J]. Russian Journal of Applied Chemistry, 2005, 78(2):305-310.
[23] Kalyanee S, Marnviga B. Improved silane grafting of high-density polyethylene in the melt by using a binary initiator and the properties of silane-crosslinked products[J]. Journal of Polymer Research, 2013, 20(4):DOI:10.1007/s10965-013-0120-x.
[24] Pesetskii S S, Jurkowski B, Krivoguz Y M, et al. PP/LDPE blends produced by reactive processing.I.Grafting efficiency and rheological and high-elastic properties of[PP/LDPE]-g-IA melts[J]. Journal of Applied Polymer Science, 2006, 102(6):5095-5104.
[25] Bruna J, Yazdani-Pedram M, Quijada R, et al. Melt grafting of itaconic acid and its derivatives onto an ethylene-propylene copolymer[J]. Reactive & Functional Polymers, 2005, 64(3):169-178.
[26] 王克俭, 涂剑刚, 王小黎. 衣康酸接枝乙烯-1-辛烯共聚物的制备[J]. 高分子材料科学与工程, 2011, 27(10):46-48.
[27] 刘喜军, 侯宝庆. POE接枝衣康酸增容PA6/POE共混物性能及形态研究[J]. 中国塑料, 2010, 24(12):36-41.
[28] 王小黎. 衣康酸接枝乙烯-1-辛烯共聚物增韧尼龙66的制备及性能研究[D]. 北京:北京化工大学, 2010.
[29] 王克俭, 王小黎. 一种超韧尼龙合金及其制备方法:中国, 101781455A[P]. 2010-03-22.
[30] Sadik T, Massardier V, Becquart F, et al. Radical grafting of polar monomers onto polypropylene by reactive extrusion[J]. Journal of Applied Polymer Science, 2013, 129(4):2177-2188.
[31] Krivoguz Y M, Yuvchenko A P, Zvereva T D, et al. Grafting of methylenebutanedioic acid to low-density polyethylene in the course of reactive extrusion, initiated with carborane-containing peroxides[J]. Russian Journal of Applied Chemistry, 2001, 74(5):845-850.
[32] 赵敏, 王平. 亚甲基丁二酸接枝LDPE[J]. 合成树脂及塑料, 2005, 22(1):5-7.
[33] Zhao Y X, Ma Y J, Yao W, et al. Styrene-assisted grafting of maleic anhydride onto isotactic poly butene-1[J]. Polymer Engineering and Science, 2011, 51(12):2483-2489.
[34] Passaglia E, Coiai S, Cicogna F, et al. Some recent advances in polyolefin functionalization[J]. Polymer International, 2014, 63(1):12-21.
[35] 段良福. 聚烯烃反应挤出接枝衣康酸的研究[D]. 青岛:青岛科技大学, 2007.
[36] Pesetskii S S, Jurkowski B, Krivoguz Y M, et al. Solubilityof additives:Grafting of itaconic acid onto ldpe by reactive extrusion. II. Effect of stabilizers[J]. Journal of Applied Polymer Science, 2001, 81(14):3439-3448.
[37] Pesetskii S S, Jurkowski B, Krivoguz Y M, et al. Oxidation of LDPE and LDPE grafted with itaconic acid, in contact with water[J]. Polymer, 2000, 41(3):1037-1043.
[38] Wojtala A, Czaja K, Sudoł M, et al. Weathering of low-density polyethylene grafted with itaconic acid in laboratory tests[J]. Journal of Applied Polymer Science, 2012, 124(2):1634-1642.
[39] Pesetskii S S, Krivoguz Y M, Jurkowski B. Structure and properties of polyamide 6 blends with lowdensity polyethylene grafted by itaconic acid and with neutralized carboxyl groups[J]. Journal of Applied Polymer Science, 2004, 92(3):1702-1708.
[40] Jurkowski B, Pesetskii S S, Olkhov Y A, et al. Investigation of molecular structure of LDPE modified by itaconic acid grafting[J]. Journal of Applied Polymer Science, 1999, 71(11):1771-1779.
[41] Krivoguz Y M, Pesetskii S S, Jurkowski B, et al. Structure and properties of polypropylene/low-density polyethylene blends grafted with itaconic acid in the course of reactive extrusion[J]. Journal of Applied Polymer Science, 2006, 102(2):1746-1754.