化工进展 ›› 2016, Vol. 35 ›› Issue (S1): 1-9.DOI: 10.16085/j.issn.1000-6613.2016.s1.001

• 化工过程与装备 • 上一篇    下一篇

燃烧尾气后处理的反应溶剂型大型工业CO2吸收塔工艺技术进展

周云龙, 司梦银, 左元慧, 康诗飞, 王燕刚, 史焕聪, 崔立峰   

  1. 上海理工大学环境与建筑学院, 上海 200093
  • 收稿日期:2016-02-22 修回日期:2016-04-02 出版日期:2016-06-30 发布日期:2016-07-08
  • 通讯作者: 崔立峰,教授,研究方向为二氧化碳吸收和封存。E-mail lifeng.cui@gmail.com。
  • 作者简介:周云龙(1991-),男,硕士研究生,研究方向为二氧化碳吸收和封存。
  • 基金资助:
    上海市浦江人才计划项目(14PJ1406800)。

Recent technological developments in post combustion CO2 capture amine scrubbing process in commercial plants

ZHOU Yunlong, SI Mengyin, ZUO Yuanhui, KANG Shifei, WANG Yangang, SHI Huancong, CUI Lifeng   

  1. School of Environmental and Architecture, University of Shanghai for Science and Technology, Shanghai 200093, China
  • Received:2016-02-22 Revised:2016-04-02 Online:2016-06-30 Published:2016-07-08

摘要: 介绍了工业化经济型CO2吸收塔的实体案例,总结近十年来工业化CO2吸收塔的化工装置以及工程技术进展。系统介绍了CO2吸收塔的化工工艺装置在运行中经常遇到的技术问题以及相应的解决方案,并分析近十年来几类技术发展,分别是溶液降解和降解产物处理技术、气体排放尾气的采样和分析技术、吸收剂主体组分分析技术、降低总体能耗的催化吸收-解吸技术。通过分析可知,利用固体矿物和生物催化剂是降低能耗的有效方法,但存在大量技术问题有待完善和解决。总之,这一系列的化工工艺技术的发展和进步,会为完善经济型吸收塔提供更多可信的实际数据。因此,燃烧尾气后处理的溶剂型CO2吸收化工工艺装置必然朝着更小的反应器(吸收塔)和更低的能耗发展目标前进,从而实现该装置的高效率和低成本运行。

关键词: 溶剂型CO2吸收, CO2吸收与封存, 经济型吸收塔(工业化应用), 取样和分析技术, 还原热能耗

Abstract: Bigger commercial plants of amine based post combustion carbon capture technologies were developed in Saskpower BD3 Unit, Estevan, SK, Canada.Even with this milestone in field of CO2 capture industry, there are still many technological difficulties ready to solve.This paper reviewed the technological development of the CO2 absorption and desorption process since the past 10 years, some major problems were very common while the running process of CO2 capture commercial plant.There are some well-developed solutions and some advanced approaches under development.The amine degradation issue and degradation products need to be analyzed and reclaimed, and the exit off gas need proper probe and sampling treatment before release to the air.The main body of reactive amine solvent need to be tested either with offline or online techniques, and some catalysts CO2 absorption and desorption were applied for heat duty reduction. Both solid mineral catalysts and biocatalysts are effective approaches, requiring extensive research and development work to pilot in order to perfect the respective processes, and to generate reliable data for a commercial plant.Thus, future trends could see significantly smaller vessels and heat duties, higher efficiency and lower operation costs for post-combustion CO2 capture from combustion flue gases using reactive solvents.

Key words: solvent-based CO2 capture, amine scrubbing process, commercial plants, sampling and analytical techniques, heat duty for regeneration

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn