化工进展

• 材料科学与技术 • 上一篇    下一篇

改性脲醛树脂的合成及性能

洪晓东1,孙 超1,牛 鑫1,梁 兵2   

  1. 1 辽宁工程技术大学材料科学与工程学院,辽宁 阜新123000;2 沈阳化工大学材料学院,辽宁 沈阳110142
  • 出版日期:2013-04-05 发布日期:2013-04-05

Synthesis and properties of modified urea-formaldehyde

HONG Xiaodong1,SUN Chao1,NIU Xin1,LIANG Bing2   

  1. 1 School of Materials Science and Engineering,Liaoning Technical University,Fuxin 123000,Liaoning,China; 2 School of Materials Science and Engineering,Shenyang University of Chemical Technology,Shenyang 110142,Liaoning,China
  • Online:2013-04-05 Published:2013-04-05

摘要: 采用传统方法合成了脲醛树脂,得出甲醛与尿素的最佳摩尔比为2。采用不同改性剂合成了改性脲醛树脂,得出:随三聚氰胺、聚乙烯醇复合改性剂用量的增加,树脂的游离甲醛含量、固化时间呈逐渐下降趋势,当复合改性剂用量为8%时树脂性能最佳,压缩强度为9.0 MPa;苯酚改性剂的最佳用量为10%,材料的压缩强度为14.2 MPa;糠醛改性剂的最佳用量为15%,材料的压缩强度为19.5 MPa;综合比较,三聚氰胺、聚乙烯醇复合改性剂可以明显降低游离甲醛的含量和固化时间,但材料的压缩强度增加不大,而采用糠醛改性剂制得改性脲醛树脂的压缩强度较大。

关键词: 脲醛树脂, 改性, 合成, 压缩强度

Abstract: Urea-formaldehyde (UF) resins were synthesized by the tradition method and the best ratio of formaldehyde and urea was 2. Modified UF were synthesized with different modifiers. With an increase of melamine and polyvinyl alcohol compounded modifiers’ dosage,the content of free formaldehyde and curing time decreased,the best dosage of the compounded modifiers was 8% and compressive strength of resin was 9.0 MPa. The best dosage of phenol modifier was 10%,compressive strength of resin was 14.2 MPa. The best dosage of furfural modifier was 15%,compressive strength of resin was 19.5 MPa. Melamine and polyvinyl alcohol compounded modifier decreased the content of free formaldehyde and curing time greatly,while compressive strength did not increase significantly;while modified UF resin with larger compressive strength could be prepared by using furfural modifier.

Key words: urea-formaldehyde resin, modification, synthesis, compressive strength

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn