纳米氢氧化镁的制备及其原位改性

doi:10.16085/j.issn.1000-6613.2017.01.037

化工进展 ›› 2017, Vol. 36 ›› Issue (01): 294-298.DOI: 10.16085/j.issn.1000-6613.2017.01.037

纳米氢氧化镁的制备及其原位改性

申红艳, 刘有智

中北大学超重力化工过程山西省重点实验室, 山西太原 030051

收稿日期:2016-04-12 修回日期:2016-05-30 出版日期:2017-01-05 发布日期:2017-01-05
通讯作者: 申红艳(1982-),女,讲师,博士,主要从事纳米氢氧化镁阻燃剂的研究。E-mail:shy_shenhongyan@163.com。
作者简介:申红艳(1982-),女,讲师,博士,主要从事纳米氢氧化镁阻燃剂的研究。E-mail:shy_shenhongyan@163.com。
基金资助:
国家自然科学基金（21376229）及山西省科技攻关项目（2015031019-5）。

Preparation and in situ modification of magnesium hydroxide nanoparticles

SHEN Hongyan, LIU Youzhi

Shanxi Province Key Laboratory of High Gravity Chemical Engineering, North University of China, Taiyuan 030051, Shanxi, China

Received:2016-04-12 Revised:2016-05-30 Online:2017-01-05 Published:2017-01-05

摘要/Abstract

摘要： 以六水氯化镁为原料，氢氧化钠为沉淀剂，采用双向沉淀法，在制备过程中引入表面活性剂制备表面有机化的纳米氢氧化镁，同时提高氢氧化镁浆料的沉降性能。以吸油值、接触角衡量氢氧化镁的改性效果，考察了表面活性剂对氢氧化镁改性效果及氢氧化镁浆料沉降性能的影响。利用纳米粒度仪和红外光谱仪对产物的粒径和结构进行表征。结果表明，不同的表面活性剂对氢氧化镁的改性作用存在一定的差别。在制备过程中，油酸的引入对氢氧化镁的改性效果最好，改性后氢氧化镁的接触角和吸油值明显提高，同时改善了氢氧化镁浆料的沉降性能。FTIR分析证明油酸成功地吸附在氢氧化镁表面。

关键词: 表面活性剂, 改性, 沉降, 氢氧化镁, 制备

Abstract: Surface organic magnesium hydroxide nanoparticles were prepared by one-step double precipitation method with surfactant and using magnesium chloride hexahydrate as raw material and sodium hydroxide as precipitant. Moreover,the settlement property of the magnesium hydroxide slurry were improved. The oil absorption and contact angle were selected as parameters to characterize the effect of surfactant on the modified magnesium hydroxide and its slurry's settlement property. The particle size and molecular structure were characterized by laser particle size analyzer(LPSA) and Fourier transform infrared spectrometer(FTIR),respectively. Experimental results indicated that the magnesium hydroxides modified by different surfactant were different. Among the surfactants,OA was the best for the modification of magnesium hydroxide,because the oil absorption and contact angle were significantly increased,and the settlement property was improved after OA modification. FTIR results indicated that OA had indeed been bonded on the surface of magnesium hydroxide.

Key words: surfactants, modification, sedimentation, magnesium hydroxide, preparation

中图分类号:

TQ03.39

申红艳, 刘有智. 纳米氢氧化镁的制备及其原位改性[J]. 化工进展, 2017, 36(01): 294-298.

SHEN Hongyan, LIU Youzhi. Preparation and in situ modification of magnesium hydroxide nanoparticles[J]. Chemical Industry and Engineering Progree, 2017, 36(01): 294-298.

参考文献

[1] MA X,MA H W,JIANG X Q,et al. Preparation of magnesium hydroxide nano owers from boron mud via anti-drop precipitation method[J]. Materials Research Bulletin,2014,56(56):113-118.
[2] LI X,MA C,ZHAO J Y,et al. Preparation of magnesium hydroxide nanoplates using a bubbling setup[J]. Powder Technology,2010,198(2):292-297.
[3] HENRIST C,MATHIEU J P,VOGELS C,et al. Morphological study of magnesium hydroxide nanoparticles precipitated in dilute aqueous solution[J]. Journal of Crystal Growth,2003,249(1-2):321-330.
[4] YU J C,XU A W,ZHANG L Zi,et al. Synthesis and characterization of porous magnesium hydroxide and oxide nanoplates[J]. Journal of Physical Chemistry B,2003,108(1):64-70.
[5] SIERRA-FERNANDEZ A,GOMEZ-VILLALBA L S,MILOSEVIC O,et al. Synthesis and morpho-structural characterization of nanostructured magnesium hydroxide obtained by a hydrothermal method[J]. Ceramics International,2014,40(8):12285-12292.
[6] ZHANG F Z,ZHANG H,SU Z X. Surface treatment of magnesium hydroxide to improve its dispersion in organic phase by the ultrasonic technique[J]. Applied Surface Science,2007,253(18):7393-7397.
[7] GUO X J,ZHAO L H,ZHANG L,et al. Surface modification of magnesium aluminum hydroxide nanoparticles with poly(methyl methacrylate)via one-pot in situ polymerization[J]. Applied Surface Science,2012,258(7):2404-2409.
[8] LIU J H,FENG N,CHANG S Q,et al. Preparation and characterization of poly(glycidyl methacrylate)grafted from magnesium hydroxide particles via SI-ATRP[J]. Applied Surface Science,2012,258(16):6127-6135.
[9] 李艳玲,毛如增,吴立军,等. 超细氢氧化镁阻粉体表面改性研究[J]. 中国粉体技术,2007,13(1):29-32. Li Y L,MAO R Z,WU L J,et al. Surface modification of ultrafine magnesium hydrozide powder[J]. China Powder Science and Technology,2007,13(1):29-32.
[10] YAN H,ZHANG X H,WEI L Q,et al. Hydrophobic magnesium hydroxide nanoparticles via oleic acid and poly(methyl methacrylate)-grafting surface modification[J]. Powder Technology,2009,193(2):125-129.
[11] 郑永林,王彩丽. 粉体表面改性[M]. 北京:中国建材工业出版社,2011. ZHENG Y L,WANG C L. Surface modification of powder[M]. Beijing:China Building Materials Industry Press,2011.

[1]	王家庆, 宋广伟, 李强, 郭帅成, DAI Qingli. 橡胶混凝土界面改性方法及性能提升路径[J]. 化工进展, 2023, 42(S1): 328-343.
[2]	陈崇明, 陈秋, 宫云茜, 车凯, 郁金星, 孙楠楠. 分子筛基CO₂吸附剂研究进展[J]. 化工进展, 2023, 42(S1): 411-419.
[3]	顾永正, 张永生. HBr改性飞灰对Hg⁰的动态吸附及动力学模型[J]. 化工进展, 2023, 42(S1): 498-509.
[4]	赵景超, 谭明. 表面活性剂对电渗析减量化工业含盐废水的影响[J]. 化工进展, 2023, 42(S1): 529-535.
[5]	王谨航, 何勇, 史伶俐, 龙臻, 梁德青. 气体水合物阻聚剂研究进展[J]. 化工进展, 2023, 42(9): 4587-4602.
[6]	朱杰, 金晶, 丁正浩, 杨会盼, 侯封校. 化学链气化中准东煤灰对CaSO₄载氧体改性及其作用机理[J]. 化工进展, 2023, 42(9): 4628-4635.
[7]	王晋刚, 张剑波, 唐雪娇, 刘金鹏, 鞠美庭. 机动车尾气脱硝催化剂Cu-SSZ-13的改性研究进展[J]. 化工进展, 2023, 42(9): 4636-4648.
[8]	高彦静. 单原子催化技术国际研究态势分析[J]. 化工进展, 2023, 42(9): 4667-4676.
[9]	李雪佳, 李鹏, 李志霞, 晋墩尚, 郭强, 宋旭锋, 宋芃, 彭跃莲. 亲水和疏水改性膜的抗结垢和润湿能力的对比[J]. 化工进展, 2023, 42(8): 4458-4464.
[10]	吴海波, 王希仑, 方岩雄, 纪红兵. 3D打印催化材料开发与应用进展[J]. 化工进展, 2023, 42(8): 3956-3964.
[11]	陈俊俊, 费昌恩, 段金汤, 顾雪萍, 冯连芳, 张才亮. 高生物活性聚醚醚酮化学改性研究进展[J]. 化工进展, 2023, 42(8): 4015-4028.
[12]	李润蕾, 王子彦, 王志苗, 李芳, 薛伟, 赵新强, 王延吉. CuO-CeO₂/TiO ₂ 高效催化CO低温氧化反应性能[J]. 化工进展, 2023, 42(8): 4264-4274.
[13]	储甜甜, 刘润竹, 杜高华, 马嘉浩, 张孝阿, 王成忠, 张军营. 有机胍催化脱氢型RTV硅橡胶的制备和可降解性能[J]. 化工进展, 2023, 42(7): 3664-3673.
[14]	谭利鹏, 申峻, 王玉高, 刘刚, 徐青柏. 煤沥青和石油沥青共混改性的研究进展[J]. 化工进展, 2023, 42(7): 3749-3759.
[15]	俞俊楠, 俞建峰, 程洋, 齐一搏, 化春键, 蒋毅. 基于深度学习的变宽度浓度梯度芯片性能预测[J]. 化工进展, 2023, 42(7): 3383-3393.

纳米氢氧化镁的制备及其原位改性

Preparation and in situ modification of magnesium hydroxide nanoparticles

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价