S型垂直筛板流化床的性能

化工进展

S型垂直筛板流化床的性能

董　群，赵玲伶，李　楠，刘　沙，刘乙兴，白树梁

东北石油大学化学化工学院，黑龙江大庆 163318

出版日期:2012-11-05 发布日期:2012-11-05

Study on the performance of S type vertical sieve tray fluidized bed

DONG Qun, ZHAO Lingling, LI Nan, LIU Sha, LIU Yixing, BAI Shuliang

College of Chemistry and Chemical Engineering, Northeast Petroleum University, Daqing 163318, Heilongjiang, China

Online:2012-11-05 Published:2012-11-05

摘要/Abstract

摘要： 在S型垂直筛板流化床中，以FCC催化剂和空气作为流化介质，对垂直筛板流化床的流化性能进行冷模实验研究，考察了板孔气速、固体循环量和帽罩结构对床层压降和帽罩提升量的影响，用提升量收集器测量帽罩提升量。实验结果表明，床层压降随板孔气速和帽罩底隙高度的增加而增加，而随塔板开孔直径、帽罩开孔直径和开孔率的增加而下降。帽罩提升量则随板孔气速、固体循环量、塔板开孔直径及帽罩底隙高度的增加而增加；随帽罩开孔直径的增加，提升量先增加后下降。

关键词: 垂直筛板, 气固流化床, 压降, 帽罩提升量

Abstract: In an S type vertical sieve tray fluidized bed, a study on cold model experiment of the behavior of gas-solid fluidization was carried out, using FCC catalysts and room air as the fluidizing medium. The impacts of parameters such as the gas velocity of tray hole, the solid circulation volume and the cap structure on the tray pressure drop and particle lift rate through caps were investigated, and particle lift rate through caps was measured with self-developed particle lift rate collector. The results showed that：the bed pressure drop increased with the gas velocity of tray hole and the cap bottom gap height increasing, and decreased with the tray hole diameter, the hole diameter and opening rate of caps increasing. Particle lift rate through caps increased with the increases of tray hole gas velocity, the solid circulation volume, the tray hole diameter and the cap bottom gap height, and decreased when the cap hole diameter increased to a certain point.

Key words: S type vertical sieve trays, gas-solid fluidized bed, pressure drop, particle lift rate through caps

董　群，赵玲伶，李　楠，刘　沙，刘乙兴，白树梁. S型垂直筛板流化床的性能[J]. 化工进展.

DONG Qun, ZHAO Lingling, LI Nan, LIU Sha, LIU Yixing, BAI Shuliang. Study on the performance of S type vertical sieve tray fluidized bed[J]. Chemical Industry and Engineering Progree.

[1]	程涛, 崔瑞利, 宋俊男, 张天琪, 张耘赫, 梁世杰, 朴实. 渣油加氢装置杂质沉积规律与压降升高机理分析[J]. 化工进展, 2023, 42(9): 4616-4627.
[2]	陈林, 徐培渊, 张晓慧, 陈杰, 徐振军, 陈嘉祥, 密晓光, 冯永昌, 梅德清. 液化天然气绕管式换热器壳侧混合工质流动及传热特性[J]. 化工进展, 2023, 42(9): 4496-4503.
[3]	邱沫凡, 蒋琳, 刘荣正, 刘兵, 唐亚平, 刘马林. 气固流化床化学反应数值模拟中颗粒尺度模型研究进展[J]. 化工进展, 2023, 42(10): 5047-5058.
[4]	贾文龙, 孙溢彬, 汤丁, 陈家文, 雷思罗, 李长俊. 基于支持向量机的输气管道泄漏压降信号智能识别方法[J]. 化工进展, 2022, 41(9): 4713-4722.
[5]	廖珮懿, 杨代军, 明平文, 薛明喆, 李冰, 张存满. 微流道气-液两相流研究及其在PEMFC中的应用进展[J]. 化工进展, 2021, 40(9): 4734-4748.
[6]	敬加强, 尹晓云, NMASTOBAEV Boris, RVALEEV Anvar, 孙杰, 王思汗, 刘华平, 庄乐泉, 范峥嵘. 水平管内水环输送模拟稠油减阻特性[J]. 化工进展, 2021, 40(2): 635-641.
[7]	敬佩瑜, 郑思佳, 张帅, 唐超, 段林林, 付斌. 输气站场过滤分离器压降与除尘效率变化特性[J]. 化工进展, 2021, 40(10): 5480-5490.
[8]	沈华峰, 李育敏, 计建炳, 陈加齐, 王炜. 同心圈式旋转床的精馏实验[J]. 化工进展, 2020, 39(7): 2583-2589.
[9]	任欢,赵兵涛,王东燊,张芸. 颗粒负荷对小型旋风器性能影响的模拟分析[J]. 化工进展, 2020, 39(3): 882-889.
[10]	张安琪,谯敏,武劭恂,毛宇,黄卫星. 气液两相并流向下通过筛板孔口单元的压降特性[J]. 化工进展, 2020, 39(1): 49-55.
[11]	何宽,柳建华,张良,余肖霄. 5mm微肋管内R404A流动沸腾压降特性[J]. 化工进展, 2019, 38(08): 3548-3555.
[12]	滕建鑫, 杨春英, 贺征. 惯性分离装置的性能分析及结构优化[J]. 化工进展, 2019, 38(05): 2074-2084.
[13]	周诗岽, 陈小康, 边慧, 何骋远, 王树立, 吕晓方. CO₂水合物在管道中的生成及堵塞特性[J]. 化工进展, 2018, 37(11): 4250-4256.
[14]	陆佳冬, 王广全, 唐迪, 耿康生, 郑斌, 计建炳. 新型径向叶片式旋转床压降分析及气相流场模拟[J]. 化工进展, 2018, 37(06): 2084-2091.
[15]	宋光春, 李玉星, 王武昌, 姜凯, 施政灼, 姚淑鹏. 基于群体平衡理论的管内水合物浆流动特性数值模拟[J]. 化工进展, 2018, 37(02): 561-568.