1 |
WANG Junjie, BIAN Haozhi, CAO Xiaxin, et al. Numerical performance analysis of a novel shell-and-tube oil cooler with wire-wound and crescent baffles[J]. Applied Thermal Engineering, 2021, 184: 116298.
|
2 |
ZHANG Jianfei, GUO Shaolong, LI Zhongzhen, et al. Experimental performance comparison of shell-and-tube oil coolers with overlapped helical baffles and segmental baffles[J]. Applied Thermal Engineering, 2013, 58(1/2): 336-343.
|
3 |
张正国, 林培森, 王世平, 等. 螺旋隔板花瓣管油冷却器的传热强化[J]. 化工学报, 2001, 52(6): 482-484.
|
|
ZHANG Zhengguo, LING Peisen, WANG Shiping, et al. Heat transfer enhancement of petal-shaped fin tubes oil-cooler with helical baffles[J]. Journal of Chemical Industry and Engineering (China), 2001, 52(6): 482-484.
|
4 |
ZHANG Zhengguo, XU Tao, FANG Xiaoming. Experimental study on heat transfer enhancement of a helically baffled heat exchanger combined with three-dimensional finned tubes[J]. Applied Thermal Engineering, 2004, 24(14/15): 2293-2300.
|
5 |
ZHANG Zhengguo, FANG Xiaoming. Comparison of heat transfer and pressure drop for the helically baffled heat exchanger combined with three-dimensional and two-dimensional finned tubes[J]. Heat Transfer Engineering, 2006, 27(7):17-22.
|
6 |
董其伍, 刘敏珊. 纵流壳程换热器[M]. 北京: 化学工业出版社, 2007.
|
|
DONG Qiwu, LIU Minshan. Shell side longitudinal flow heat exchanger[M]. Beijing: Chemical Industry Press, 2007.
|
7 |
SMALL W M, YOUNG R K. The RODbaffle heat exchanger[J]. Heat Transfer Engineering, 1979, 1(2): 21-27.
|
8 |
GENTRY C C, YOUNG R K, SMALL W M. RODbaffle heat exchanger thermal-hydraulic predictive methods[C]// Proceeding of International Heat Transfer Conference 7. Connecticut: Begellhouse, 1982.
|
9 |
王新婷, 郑年本, 刘鹏, 等. 波形折流杆换热器的流动与传热性能分析[J]. 工程热物理学报, 2016, 37(8): 1758-1762.
|
|
WANG Xinting, ZHENG Nianben, LIU Peng, et al. Analysis of flow and heat transfer capability in rod baffle heat exchangers with ripple rods[J]. Journal of Engineering Thermophysics, 2016, 37(8): 1758-1762.
|
10 |
WANG Xinting, LIANG Yunmin, SUN Yue, et al. Experimental and numerical investigation on shell-side performance of a double shell-pass rod baffle heat exchanger[J]. International Journal of Heat and Mass Transfer, 2019, 132: 631-642.
|
11 |
邓先和, 邓颂九. 管间支撑物的结构对横纹槽管管束传热强化性能的影响[J].化工学报, 1992, 43(1): 62-68.
|
|
DENG Xianhe, DENG Songjiu. Influence of the forms of tube support on heat transfer performance of transversally fluted tube bundle[J]. Journal of Chemical Industry and Engineering (China), 1992, 43(1): 62-68.
|
12 |
邓先和. 空心环管壳式换热器工业应用概况[J]. 化工进展, 1997, 16(5): 35-38, 52.
|
|
DENG Xianhe. Review of industrial applications of RING-NET supported tubular heat exchanger[J]. Chemical Industry and Engineering Progress, 1997, 16(5): 35-38, 52.
|
13 |
罗小平, 邓先和, 邓颂九. 空心环支承轴流式换热器壳程流体阻力系数[J]. 化工学报, 1999, 50(1): 130-135.
|
|
LUO Xiaoping, DENG Xianhe, DENG Songjiu. Research on flow resistance of ring support heat exchanger with longitudinal fluid flow on shell side[J]. Journal of Chemical Industry and Engineering (China), 1999, 50(1): 130-135.
|
14 |
DZYUBENKO B V, DREITSER G A. Heat transfer and fluid friction in bundles of twisted tubes[J]. Journal of Engineering Physics, 1986, 50(6): 611-618.
|
15 |
YANG Sheng, ZHANG Li, XU Hong. Experimental study on convective heat transfer and flow resistance characteristics of water flow in twisted elliptical tubes[J]. Applied Thermal Engineering, 2011, 31(14/15): 2981-2991.
|
16 |
董新宇, 毕勤成, 贺宇峰, 等. 钛合金螺旋扁管换热器流阻与传热性能实验研究[J]. 西安交通大学学报, 2018, 52(1): 14-19, 25.
|
|
DONG Xinyu, BI Qincheng, HE Yufeng, et al. Experimental research on the flow friction and heat transfer performance in titanium alloy twisted tube[J]. Journal of Xi'an Jiaotong University, 2018, 52(1): 14-19, 25.
|
17 |
LI Xiuzhen, ZHU Dongsheng, YIN Yinde, et al. Parametric study on heat transfer and pressure drop of twisted oval tube bundle with in line layout[J]. International Journal of Heat and Mass Transfer, 2019, 135: 860-872.
|
18 |
SHAVER D R, CARASIK L B, MERZARI E, et al. Calculation of friction factors and Nusselt numbers for twisted elliptical tube heat exchangers using Nek5000[J]. Journal of Fluids Engineering, 2019, 141(7): 071205
|
19 |
涂爱民, 刘世杰, 莫逊, 等. 螺旋扭曲管用于燃气轮机进气温度调节换热器的可行性研究[J]. 化工学报, 2020, 71(4): 1562-1569.
|
|
TU Aimin, LIU Shijie, MO Xun, et al. Feasibility study of spiral twisted tube for gas turbine inlet temperature regulating heat exchanger[J]. CIESC Journal, 2020, 71(4): 1562-1569.
|
20 |
DONG Xinyu, JIN Xiangdong, LI Peiyue, et al. Experimental research on heat transfer and flow resistance properties in spiral twisted tube heat exchanger[J]. Applied Thermal Engineering, 2020, 176: 115397.
|
21 |
王定标, 王宏斌, 梁珍祥. 扭曲三叶管传热与流阻性能的数值研究[J]. 化工学报, 2012, 63(7): 2064-2069.
|
|
WANG Dingbiao, WANG Hongbin, LIANG Zhenxiang. Numerical research on heat transfer and flow resistance performance of twisted trifoliate tube[J]. CIESC Journal, 2012, 63(7): 2064-2069.
|
22 |
刘遵超, 王珂, 古新, 等. 超临界CO2在三叶管内换热特性研究[J]. 工程热物理学报, 2015, 36(9): 2010-2013.
|
|
LIU Zunchao, WANG Ke, GU Xin, et al. Research on heat transfer characteristics of supercritical CO2 in trefoil tube[J]. Journal of Engineering Thermophysics, 2015, 36(9): 2010-2013.
|
23 |
黄媛媛, 周帼彦, 钱泰磊, 等. 基于三叶扭曲膨胀管技术的油冷器实验分析[J]. 制冷学报, 2015, 36(1): 107-112.
|
|
HUANG Yuanyuan, ZHOU Guoyan, QIAN Tailei, et al. Experimental analysis of oil cooler based on trefoil screwed expansion pipe[J]. Journal of Refrigeration, 2015, 36(1): 107-112.
|
24 |
TANG Xinyi, DAI Xianfeng, ZHU Dongsheng. Experimental and numerical investigation of convective heat transfer and fluid flow in twisted spiral tube[J]. International Journal of Heat and Mass Transfer, 2015, 90: 523-541.
|
25 |
刘世杰, 朱冬生. 三叶膨胀管管内传热与阻力特性研究[J]. 化学工程, 2017, 45(8): 17-21.
|
|
LIU Shijie, ZHU Dongsheng. Research on heat transfer and flow resistance performance of trefoil expansion tube[J]. Chemical Engineering (China), 2017, 45(8): 17-21.
|
26 |
刘世杰, 涂爱民, 尹应德, 等. 三叶膨胀管换热器壳程强化传热的数值研究[J]. 新能源进展, 2020, 8(1): 62-67.
|
|
LIU Shijie, TU Aimin, YIN Yingde, et al. Numerical investigation on shell-side heat transfer enhancement of trefoil expansion tube heat exchanger[J]. Advances in New and Renewable Energy, 2020, 8(1): 62-67.
|
27 |
戴险峰. 非对称螺旋扭曲管管内流动与传热特性数值模拟研究[J]. 工程热物理学报, 2018, 39(3): 640-646.
|
|
DAI Xianfeng. Numerical study on flow and heat transfer characteristics of asymmetrical spiral twisted tubes[J]. Journal of Engineering Thermophysics, 2018, 39(3): 640-646.
|
28 |
杨世铭, 陶文铨. 传热学[M]. 4版. 北京: 高等教育出版社, 2006.
|
|
YANG Shiming, TAO Wenquan. Heat transfer[M]. 4th ed.Beijing: Higher Education Press, 2006.
|
29 |
MOFFAT R J. Describing the uncertainties in experimental results[J]. Experimental Thermal and Fluid Science, 1988, 1(1): 3-17.
|
30 |
WEBB R L. Principles of enhanced heat transfer[M]. New York: Wiley, 1994.
|