化工进展 ›› 2025, Vol. 44 ›› Issue (3): 1716-1725.DOI: 10.16085/j.issn.1000-6613.2024-0421

• 资源与环境化工 • 上一篇    下一篇

硅铝矿物组分对垃圾焚烧飞灰熔融特性与重金属固化的影响

高嘉炜1(), 黄亚继1(), 王圣2, 朱志成1, 肖怡萱1, 宋惠康1, 刘俊1, 祁帅杰1, 张煜尧1, 赵佳琪1   

  1. 1.东南大学能源热转换及其过程测控教育部重点实验室,江苏 南京 210096
    2.清洁高效燃煤发电与污染控制国家重点实验室,江苏 南京 210023
  • 收稿日期:2024-03-14 修回日期:2024-07-10 出版日期:2025-03-25 发布日期:2025-04-15
  • 通讯作者: 黄亚继
  • 作者简介:高嘉炜(1996—),男,硕士研究生,研究方向为固体废弃物处理。E-mail: gaojw2020@163.com
  • 基金资助:
    江苏省科技计划(BE2022604)

Effects of silicon-aluminum mineral components on the melting characteristics and the solidification of heavy metal of municipal solid waste incineration fly ash

GAO Jiawei1(), HUANG Yaji1(), WANG Sheng2, ZHU Zhicheng1, XIAO Yixuan1, SONG Huikang1, LIU Jun1, QI Shuaijie1, ZHANG Yuyao1, ZHAO Jiaqi1   

  1. 1.Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, Southeast University, Nanjing 210096, Jiangsu, China
    2.State Key Laboratory of Clean and Efficient Coal-fired Power Generation and Pollution Control, Nanjing 210023, Jiangsu, China
  • Received:2024-03-14 Revised:2024-07-10 Online:2025-03-25 Published:2025-04-15
  • Contact: HUANG Yaji

摘要:

熔融法是无害化处置垃圾焚烧(MSWI)飞灰的有效方法。本文开展了硅铝添加剂与飞灰的共熔实验研究,分析了不同硅铝矿物组分对飞灰熔融特性及重金属固化效果的影响。研究发现,硅铝组分和热处理温度对飞灰熔融和重金属的氯化挥发影响较大,其中,SiO2的加入可有效降低飞灰的熔融温度,且添加量为20%时,产物中开始大量出现无定形玻璃体,适量Al2O3的加入有助于重金属的固化,但对飞灰的熔融无明显促进作用;高温和硅铝组分的加入有利于促进重金属的直接或间接氯化反应,使其以氯化物形式挥发,同时生成碱金属硅铝酸盐;此外,蒙脱土在促进飞灰熔融以及固化重金属等方面均优于高岭土,且热处理产物的多次浸出毒性均满足国标限值。

关键词: 垃圾焚烧飞灰, 硅铝矿物组分, 熔融, 重金属, 氯化反应, 连续浸出

Abstract:

Melting is an efficient method for harmless disposal of municipal solid waste incineration fly ash. Experimental study on the co-melting of silica-aluminum additives with fly ash was carried out to analyze the effects of different silica-aluminum mineral components on the melting characteristics and the solidification of heavy metals of fly ash. It was found that the silica-aluminum components and thermal treatment temperature had significant impacts on the melting of fly ash and the chlorinated volatilization of heavy metals. Among them, the addition of SiO2 could effectively reduce the melting temperature of fly ash. When the addition amount was 20%, a large number of amorphous vitreous bodies began to appear in the product. The addition of a moderate amount of Al2O3 helped the solidification of heavy metals, but it had no obvious promotion effect on the melting of fly ash. High temperature and the addition of Si-Al mineral components were conducive to the promotion of the direct or indirect chlorination of heavy metals, making them volatilize in the form of chlorides, while alkali metal silica-aluminates were produced. In addition, montmorillonite was superior to kaolin in promoting the melting of fly ash and solidifying heavy metals, and the continuous leaching toxicity of the thermal treatment products could meet the standards.

Key words: municipal solid waste incineration fly ash, silicon-aluminum mineral components, melting, heavy metals, chlorination reaction, continuous leaching

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn