化工进展

• 工业催化 • 上一篇    下一篇

负载型杂多酸催化甲苯异丙基化反应

冯锡兰,彭慧慧,柳云骐,刘晨光,戴昉纳,刘春英   

  1. 中国石油大学(华东)CNPC催化重点实验室,山东 青岛 266580
  • 出版日期:2014-12-05 发布日期:2014-12-05

Study of catalytic properties of supported heteropoly acids in reactions of toluene isopropylation

FENG Xilan,PENG Huihui,LIU Yunqi,LIU Chenguang,DAI Fangna,LIU Chunying   

  1. CNPC Key Laboratory of Catalysis,China University of Petroleum,Qingdao 266580,Shandong,China
  • Online:2014-12-05 Published:2014-12-05

摘要: 以等体积浸渍法制备了负载型杂多酸PWH/SiO2催化剂,采用高压流动微反装置研究了其催化甲苯与异丙醇烷基化反应结果的规律,关联表征结果确定制备负载磷钨酸的适宜条件为:负载量40%,焙烧温度200℃。其催化甲苯与异丙醇烷基化反应适宜反应条件是:反应温度为200℃,甲苯与异丙醇的摩尔比为4∶1,体积空速为2h?1,在此条件下,异丙醇的转化率最高达到92.94%,烷基化反应选择性达83.89%。

关键词: 负载型杂多酸, 浸渍法, 甲苯, 烷基化

Abstract: Supported heteropoly acid PWH/SiO2 was prepared by impregnation. The optimum conditions of preparation (40% loading and calcination temperature of 200℃) were determined by alkylation of toluene with isopropanol,as well as characterization of XRD,FT-IR and N2-adsorption/desorption. The most favorable alkylation reaction conditions were as follows:reaction temperature 200℃,toluene/isopropanol ratio 4∶1,and space velocity 2h?1. Under the optimized conditions,conversion of isopropanol reached 92.94%,and selection of alkylation was 83.89%.

Key words: supported heteropoly acid, impregnation method, toluene, alkylation

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn