化工进展

• 资源与环境工程 • 上一篇    下一篇

Mn-Ce/TiO2低温脱硝催化剂的性能

耿春香1,刘文蓉1,2,柴倩倩1,王陈珑1   

  1. 1中国石油大学(华东)化学工程学院,山东 青岛 266555;2天津市联合环保工程设计有限公司,天津 300191
  • 出版日期:2012-06-05 发布日期:2012-06-05

Study on the denitration characteristics of Mn-Ce/TiO2 catalyst at low temperature

GENG Chunxiang1,LIU Wenrong1,2,CHAI Qianqian1,WANG Chenlong1   

  1. 1College of Chemical Engineering,China University of Petroleum,Qingdao 266555,Shandong,China;2Tianjin United Environmental Protection Engineering Design Co.,Ltd.,Tianjin 300191,China
  • Online:2012-06-05 Published:2012-06-05

摘要: 采用等体积浸渍法制备催化剂,在TiO2颗粒表面滴入硝酸锰和硝酸铈溶液,制备需要的Mn-Ce/TiO2催化剂。采用固定床催化剂反应器,以氨气为还原剂,考察了不同锰前体制备的催化剂选择性催化还原NO的活性,研究了负载顺序、温度、负载量、空间速度、O2含量、NH3/NO不同情况下NO的去除率。研究结果表明,温度在160 ℃、Mn∶Ce摩尔比为8∶1,负载量为18%时,催化剂对NO的去除率可达到90%。

关键词: 烟气脱硝, 等体积浸渍, 选择性催化还原, 低温

Abstract: The Mn-Ce/TiO2 catalyst was prepared by the incipient impregnation of instilling nitric acid manganese and nitric acid cerium solution on the surface of the TiO2 particles. Using a fixed bed catalyst reactor and ammonia gas as the reductant,the activation of selective catalytic reduction NO was studied by catalyst prepared in different manganese precursors. And the NO removal rate was also studied under different load sequences,temperatures,load capacities,space velocities,and content of O2,NH3/NO. The result showed that the NO removal rate of catalyst can reached 90%. when the temperature was 160 ℃,Mn∶Ce molar ratio was 8∶1 and load capacity was 18%.

Key words: flue gas denitration, volume impregnation, selective catalytic reduction, low temperature

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn