船舶SCR脱硝尿素喷射分解及氨气分布均匀性的优化

doi:10.16085/j.issn.1000-6613.2017.02.047

化工进展 ›› 2017, Vol. 36 ›› Issue (02): 742-749.DOI: 10.16085/j.issn.1000-6613.2017.02.047

船舶SCR脱硝尿素喷射分解及氨气分布均匀性的优化

王铮¹, 刘道银¹, 刘猛¹, 吴勤瑞², 檀净², 陈晓平¹

1 东南大学能源热转换及其过程测控教育部重点实验室, 江苏南京 210096;
2 南京中船绿洲环保有限公司, 江苏南京 210039

收稿日期:2016-07-05 修回日期:2016-09-13 出版日期:2017-02-05 发布日期:2017-02-05
通讯作者: 刘道银,副研究员,多相流及数值模拟。E-mail:dyliu@seu.edu.cn。
作者简介:王铮(1993-),女,硕士研究生。E-mail:15957280656@163.com。
基金资助:
国家自然科学基金项目（51306035）。

Optimization of uniformity of NH₃ distribution and thermolysis of urea in the SCR marine process

WANG Zheng¹, LIU Daoyin¹, LIU Meng¹, WU Qinrui², TAN Jing², CHEN Xiaoping¹

1 Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, Southeast University, Nanjing 210096, Jiangsu, China;
2 CSSC Nanjing Environment Protection Co., Ltd., Nanjing 210039, Jiangsu, China

Received:2016-07-05 Revised:2016-09-13 Online:2017-02-05 Published:2017-02-05

摘要/Abstract

摘要： 以某船型柴油机尾气选择性催化还原法（SCR）脱硝工艺为对象，采用数值模拟研究喷射管内氨气（NH₃）生成过程及分布均匀性。模型包括尿素液滴的雾化、蒸发、分解以及与流场的相间作用等。结果表明，模型可详细预测烟道内气体速度场、温度场、NH₃等气体组分场、液滴轨迹等，NH₃转化率及分布均匀性受到烟气温度、入口湍流强度、扰流器的影响。提高烟气温度、提高烟气入口湍流强度、增加扰流器，均促进NH₃生成并提高分布均匀性，但是，扰流器的旋片角度过大，会导致部分液滴冲击到管道壁面，不利于NH₃生成。对比扰流器旋片角度为15°、30°和45°的情况，发现旋片角度30°时对提高NH₃生成及分布最为有利，其出口NH₃分布不均匀性从无绕流器条件下的39.57%降低到9.36%。

关键词: 选择性催化还原, 脱硝, 氨分布均匀性, 数值模拟

Abstract: The distribution process of NH₃ in the SCR marine mixing chamber was investigated by numerical simulation. The simulation model considered atomization,evaporation,and thermolysis of urea,and its interaction with gas turbulence. This model provides the detailed information of velocity field,temperature field,component field,and trajectories of the droplets. Production and distribution of NH₃ was affected by flue gas temperature,inlet turbulent intensity,and swirl mixing. It is found that,by increasing the flue gas temperature,inlet turbulent intensity or adding a swirl mixer,the evaporation and thermolysis of urea solution accelerated,and the distribution uniformity increased. However,if the swirl angle was too large,some drops would impact the wall of the pipe,which would decrease the NH₃ production. Comparing the cases of swirl angle with 15°,30ånd 45°,it is found that the 30°swirl mixer yielded the best performance,which decreased NH₃ distribution non-uniformity from 39.57% to 9.36%.

Key words: SCR, de-NO_x, NH₃ distribution uniformity, numerical simulation

中图分类号:

TK09

王铮, 刘道银, 刘猛, 吴勤瑞, 檀净, 陈晓平. 船舶SCR脱硝尿素喷射分解及氨气分布均匀性的优化[J]. 化工进展, 2017, 36(02): 742-749.

WANG Zheng, LIU Daoyin, LIU Meng, WU Qinrui, TAN Jing, CHEN Xiaoping. Optimization of uniformity of NH₃ distribution and thermolysis of urea in the SCR marine process[J]. Chemical Industry and Engineering Progree, 2017, 36(02): 742-749.

参考文献

[1] 顾卫荣,周明吉,马薇.燃煤烟气脱硝技术的研究进展[J].化工进展,2012,31(9):2084-2092. GU W R,ZHOU M J,MA W.Technology status and analysis on coal-fired flue gas denitrification[J].Chemical Industry and Engineering Progress,2012,31(9):2084-2092.
[2] 樊庆锌,王明轩,关心,等.某燃煤电厂300MW机组SCR烟气脱硝装置结构优化[J].化工进展,2014,33(10):2806-2814. FAN Q X,WANG M X,GUAN X,et al.Optimal design of a SCR-DeNOx system for a 300MW coal-fired power plant[J].Chemical Industry and Engineering Progress,2014,33(10):2806-2814.
[3] 陈冯,王谦,何志霞,等.柴油机Urea-SCR尿素喷射过程参数优化及数值模拟研究[J].内燃机工程,2015,36(1):23-30. CHEN F,WANG Q,HE Z X,et al.Optimization and numerical simulation of urea spray parameters in diesel engine SCR system[J].Chinese Internal Combustion Engine Engineering,2015,36(1):23-30.
[4] 陈镇,陆国栋,赵彦光,等.柴油机SCR系统尿素溶液喷雾特性的试验研究[J].内燃机工程,2012,33(4):22-27. CHEN Z,LU G D,ZHAO Y G,et al.Experiment study of urea solution spray characteristics in SCR system of diesel engine[J].Chinese Internal Combustion Engine Engineering,2012,33(4):22-27.
[5] 王谦,张铎,王静,等.车用柴油机Urea-SCR系统数值分析与参数优化[J].内燃机学报,2013,31(4):343-348. WANG Q,ZHANG D,WANG J,et al.Numerical analysis and parametric optimization on Urea-SCR system of vehicle diesel[J].Transactions of CSICE,2013,31(4):343-348.
[6] 王谦,张铎,何志霞,等.柴油机Urea-SCR系统数值模拟与混合器结构优化[J].内燃机学报,2015,36(3):50-57. WANG Q,ZHANG D,HE Z X,et al.Numerical simulation of diesel engine Urea-SCR system and its mixer structure optimization[J].Transactions of CSICE,2015,36(3):50-57.
[7] 温苗苗,吕林,高孝洪.柴油机选择性催化还原后处理系统仿真[J].内燃机学报,2009,27(3):249-254. WEN M M,LU L,GAO X H.Modeling of Urea-SCR exhaust aftertreatment system for diesel[J].Transactions of CSICE,2009,27(3):249-254.
[8] 唐韬,赵彦光,华伦,等.柴油机SCR系统尿素水溶液喷雾分解的试验研究[J].内燃机工程,2015,36(1):1-5. TANG T,ZHAO Y G,HUA L,et al.Experimental study of urea solution spray and decomposition of SCR system for diesel engine[J].Chinese Internal Combustion Engine Engineering,2015,36(1):1-5.
[9] 谭丕强,杜加振,胡志远,等.关键运行参数对柴油机SCR系统性能的影响[J].化工学报,2014,65(10):4063-4070. CAO P Q,DU J Z,HU Z Y,et al.Effects of key operating parameters on SCR performance of diesel engines[J].CIESC Journal,2014,65(10):4063-4070.
[10] CALATAYUD M,MGUIG B,MINOT C.Modeling catalytic reduction of NO by ammonia over V₂O₅[J].Surface Science Reports, 2004,55(6):169-236.
[11] FANG L H,DACOSTA H F M.Urea thermolysis and NOx reduction with and without SCR catalysts[J].Applied Catalysis B:Environmental,2003,46(1):17-34.
[12] YIM S D,KIM S J,BAIK J H,et al.Decomposition of urea into NH₃ for the SCR process[J].Industrial & Engineering Chemistry Research,2004,43(16):4856-4863.
[13] ELSHNAWANY M S,LEFEBVRE A H.Airblast atomization:the effect of linear scale on mean drop size[J].Journal of Energy,1980,4(4):184-189.
[14] 董建勋,于遂影,祁宁,等.火电厂SCR脱硝反应器均流与混合技术试验研究[J].热力发电,2006,35(10):70-72. DONG J X,YU S Y,QI N,et al.Test study on flow uniformizing and reductant mixing technology in SCR denitrification reactor for thermal power plants[J].Thermal Power Generation,2006,35(10):70-72.
[15] CHOI C,SUNG Y,CHOI G M,et al.Numerical analysis of NO_x reduction for compact design in marine urea-SCR system[J]. International Journal of Naval Architecture & Ocean Engineering,2015,7(6):1020-1034.
[16] ASIF M,ZHANG Y,LIN W.Urea-SCR temperature investigation for NO_x control of diesel engine[C]//MATEC Web of Conferences. 3rd Asia Conference on Mechanical and Materials Engineering. Chengdu,China:EDP Sciences,2015:03002.
[17] GAN X B,YAO D W,WU F,et al.Modeling and simulation of urea-water-solution droplet evaporation and thermolysis processes for SCR systems[J]. Chinese Journal of Chemical Engineering,2016,24(8):1065-1073.

船舶SCR脱硝尿素喷射分解及氨气分布均匀性的优化

Optimization of uniformity of NH₃ distribution and thermolysis of urea in the SCR marine process

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	王乐乐, 杨万荣, 姚燕, 刘涛, 何川, 刘逍, 苏胜, 孔凡海, 朱仓海, 向军. SCR脱硝催化剂掺废特性及性能影响[J]. 化工进展, 2023, 42(S1): 489-497.
[2]	邓丽萍, 时好雨, 刘霄龙, 陈瑶姬, 严晶颖. 非贵金属改性钒钛基催化剂NH₃-SCR脱硝协同控制VOCs[J]. 化工进展, 2023, 42(S1): 542-548.
[3]	郭强, 赵文凯, 肖永厚. 增强流体扰动强化变压吸附甲硫醚/氮气分离的数值模拟[J]. 化工进展, 2023, 42(S1): 64-72.
[4]	邵博识, 谭宏博. 锯齿波纹板对挥发性有机物低温脱除过程强化模拟分析[J]. 化工进展, 2023, 42(S1): 84-93.
[5]	王太, 苏硕, 李晟瑞, 马小龙, 刘春涛. 交流电场中贴壁气泡的动力学行为[J]. 化工进展, 2023, 42(S1): 133-141.
[6]	陈匡胤, 李蕊兰, 童杨, 沈建华. 质子交换膜燃料电池气体扩散层结构与设计研究进展[J]. 化工进展, 2023, 42(S1): 246-259.
[7]	刘炫麟, 王驿凯, 戴苏洲, 殷勇高. 热泵中氨基甲酸铵分解反应特性及反应器结构优化[J]. 化工进展, 2023, 42(9): 4522-4530.
[8]	赵曦, 马浩然, 李平, 黄爱玲. 错位碰撞型微混合器混合性能的模拟分析与优化设计[J]. 化工进展, 2023, 42(9): 4559-4572.
[9]	王晋刚, 张剑波, 唐雪娇, 刘金鹏, 鞠美庭. 机动车尾气脱硝催化剂Cu-SSZ-13的改性研究进展[J]. 化工进展, 2023, 42(9): 4636-4648.
[10]	李东泽, 张祥, 田键, 胡攀, 姚杰, 朱林, 卜昌盛, 王昕晔. 基于水泥窑脱硝的碳基还原NO _x 研究进展[J]. 化工进展, 2023, 42(9): 4882-4893.
[11]	朱传强, 茹晋波, 孙亭亭, 谢兴旺, 李长明, 高士秋. 固体高分子脱硝剂选择性非催化还原NO _x 特性[J]. 化工进展, 2023, 42(9): 4939-4946.
[12]	白志华, 张军. 二乙烯三胺五亚甲基膦酸/Fenton体系氧化脱除NO[J]. 化工进展, 2023, 42(9): 4967-4973.
[13]	叶振东, 刘涵, 吕静, 张亚宁, 刘洪芝. 基于钙镁二元盐的热化学储能反应器的性能优化[J]. 化工进展, 2023, 42(8): 4307-4314.
[14]	李佳, 樊星, 陈莉, 李坚. 硝酸生产尾气中NO _x 和N₂O联合脱除技术研究进展[J]. 化工进展, 2023, 42(7): 3770-3779.
[15]	俞俊楠, 俞建峰, 程洋, 齐一搏, 化春键, 蒋毅. 基于深度学习的变宽度浓度梯度芯片性能预测[J]. 化工进展, 2023, 42(7): 3383-3393.

船舶SCR脱硝尿素喷射分解及氨气分布均匀性的优化

Optimization of uniformity of NH3 distribution and thermolysis of urea in the SCR marine process

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

Optimization of uniformity of NH₃ distribution and thermolysis of urea in the SCR marine process