乳液法制备石墨烯气凝胶及其吸附水中亚甲基蓝

doi:10.16085/j.issn.1000-6613.2017-1835

摘要/Abstract

摘要： 利用乳液法制备多孔石墨烯气凝胶（emGA），改变乳液油水比制备不同的emGA。扫描电子显微镜（SEM）、傅里叶红外光谱（FTIR）、氮气吸附脱附等表征显示，emGA具有多孔结构，经水热还原后含氧官能团大部分被除去，比表面积为103.3～243.1m²/g。以亚甲基蓝（MB）浓度和温度作为变量，考察emGA对水中MB的吸附效果。结果表明，emGA的比表面积越大，其对MB平衡吸附量越大；当初始浓度越大，温度越高，则吸附有利。吸附动力学数据表明emGA吸附MB符合准二级动力学模型和内扩散模型，吸附过程分为大孔扩散和微孔扩散。吸附等温线数据拟合结果符合Langmuir模型，表明emGA对MB的吸附属于单分子层吸附。Langmuir模型计算出emGA-2饱和吸附量为307.7mg/g，与实验值291.3mg/g较为接近。分析热力学参数发现，emGA吸附MB为自发吸热过程，且吸附过程属于物理吸附。

关键词: 石墨烯气凝胶, 动力学, 热力学, 吸附, 亚甲基蓝

Abstract: Porous graphene aerogels (emGA) were fabricated using emulsion method. Different emGA were prepared through changing the emulsion oil/water ratio. Analysis of scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and nitrogen adsorption showed that emGA had porous structure with specific surface areas of 103.3-243.1m²/g. Most oxygen-containing functional groups were removed after hydrothermal reduction. The adsorption of emGA to MB in water was investigated by changing the methylene blue(MB) concentration and temperature. The results indicate that the larger the specific surface area of emGA, the greater the equilibrium adsorption capacity of MB. High initial MB concentration and temperature are beneficial for the adsorption of emGA. The adsorption kinetics is well described by the pseudo second-order and intra-particle diffusion models, and the adsorption process can be divided into macropore diffusion and micropore diffusion. The adsorption isotherm data are well fitted by the Langmuir model, indicating that MB adsorption belongs to single molecular layer adsorption. Large specific surface area is favorable for the MB adsorption on emGA. The saturated adsorption capacity of emGA-2 is 307.7mg/g, given by the Langmuir model, which is to the experimental value of 291.3mg/g. Analysis of the thermodynamic parameters shows at the adsorption of MB on emGA is a spontaneous endothermic process, and belongs to physical adsorption.

Key words: graphene aerogels, kinetics, thermodynamics, adsorption, methylene blue

中图分类号:

O647.3

黄扬帆, 刘会娥, 马雁冰, 王玉斌, 陈爽. 乳液法制备石墨烯气凝胶及其吸附水中亚甲基蓝[J]. 化工进展, 2018, 37(08): 3092-3099.

HUANG Yangfan, LIU Huie, MA Yanbing, WANG Yubin, CHEN Shuang. Fabrication of graphene aerogels by emulsion method and their adsorption of methylene blue[J]. Chemical Industry and Engineering Progress, 2018, 37(08): 3092-3099.

参考文献

[1] YAO Z Y, WANG L H, QI J H. Biosorption of methylene blue from aqueous solution using a bioenergy forest waste:xanthoceras sorbifolia seed coat[J]. Clean-Soil Air Water, 2009, 37(8):642-648.
[2] HAO O J, KIM H, CHIANG P C. Decolorization of wastewater[J]. Critical Reviews in Environmental Science and Technology, 2000, 30(4):449-505.
[3] WENG C-H, LIN Y-T, TZENG T-W. Removal of methylene blue from aqueous solution by adsorption onto pineapple leaf powder[J]. Journal of Hazardous Materials, 2009, 170(1):417-424.
[4] SEN T K, AFROZE S, ANG H M. Equilibrium, kinetics and mechanism of removal of methylene blue from aqueous solution by adsorption onto pine cone biomass of pinus radiata[J]. Water Air & Soil Pollution, 2010, 218(1-4):499-515.
[5] DUTTA D, THAKUR D, BAHADUR D. SnO₂ quantum dots decorated silica nanoparticles for fast removal of cationic dye(methylene blue) from wastewater[J]. Chemical Engineering Journal, 2015, 281(4):482-490.
[6] WU T, CHEN M X, ZHANG L, et al. Three-dimensional graphene-based aerogels prepared by a self-assembly process and its excellent catalytic and absorbing performance[J]. Journal of Materials Chemistry A, 2013, 1(26):7612-7621.
[7] SHEN Y, FANG Q L, CHEN B L. Environmental applications of three-dimensional graphene-based macrostructures:adsorption, transformation, and detection[J]. Environmental Science & Technology, 2015, 49(1):67-84.
[8] AI L H, JIANG J. Removal of methylene blue from aqueous solution with self-assembled cylindrical graphene-carbon nanotube hybrid[J]. Chemical Engineering Journal, 2012, 192(2):156-163.
[9] DENG W, FANG Q L, ZHOU X F, et al. Hydrothermal self-assembly of graphene foams with controllable pore size[J]. RSC Advances, 2016, 6(25):20843-20849.
[10] CHENG C, LI S, ZHAO J, et al. Biomimetic assembly of polydopamine-layer on graphene:mechanisms, versatile 2D and 3D architectures and pollutant disposal[J]. Chemical Engineering Journal, 2013, 228(28):468-481.
[11] LI Y, ZHANG R F, TIAN X K, et al. Facile synthesis of Fe₃O₄ nanoparticles decorated on 3D graphene aerogels as broad-spectrum sorbents for water treatment[J]. Applied Surface Science, 2016, 369(1):11-18.
[12] WEI G, MIAO Y E, ZHANG C, et al. Ni-doped graphene/carbon cryogels and their applications as versatile sorbents for water purification[J]. ACS Applied Materials & Interfaces, 2013, 5(15):7584-7591.
[13] WANG J L, SHI Z X, FAN J C, et al. Self-assembly of graphene into three-dimensional structures promoted by natural phenolic acids[J]. Journal of Materials Chemistry, 2012, 22(42):22459-22466.
[14] FAN J C, SHI Z X, LIAN M, et al. Mechanically strong graphene oxide/sodium alginate/polyacrylamide nanocomposite hydrogel with improved dye adsorption capacity[J]. Journal of Materials Chemistry A, 2013, 1(25):7433-7443.
[15] HUANG X D, QIAN K, YANG J, et al. Functional nanoporous graphene foams with controlled pore sizes[J]. Advanced Materials, 2012, 24(32):4419-4423.
[16] KIM J, COTE L J, KIM F, et al. Graphene oxide sheets at interfaces[J]. Journal of the American Chemical Society, 2010, 132(23):8180-8186.
[17] HE Y Q, WU F, SUN X Y, et al. Factors that affect pickering emulsions stabilized by graphene oxide[J]. ACS Applied Materials & Interfaces, 2013, 5(11):4843-4855.
[18] FEI X M, XIA L, CHEN M Q, et al. Preparation and application of water-in-oil emulsions stabilized by modified graphene oxide[J]. Materials, 2016, 9(9):731-743.
[19] THICKETT S C, ZETTERLUND P B. Graphene oxide(GO) nanosheets as oil-in-water emulsion stabilizers:influence of oil phase polarity[J]. Journal of Colloid and Interface Science, 2015, 442:67-74.
[20] COTE L J, KIM F, HUANG J X. Langmuir-Blodgett assembly of graphite oxide single layers[J]. Journal of the American Chemical Society, 2009, 131(3):1043-1049.
[21] XU L M, XIAO G Y, CHEN C B, et al. Superhydrophobic and superoleophilic graphene aerogel prepared by facile chemical reduction[J]. Journal of Materials Chemistry A, 2015, 3(14):7498-7504.
[22] CHEN J, CHI F Y, HUANG L, et al. Synthesis of graphene oxide sheets with controlled sizes from sieved graphite flakes[J]. Carbon, 2016, 110:34-40.
[23] CHI C X, XU H B, ZHANG K, et al. 3D hierarchical porous graphene aerogels for highly improved adsorption and recycled capacity[J]. Materials Science and Engineering:B, 2015, 194:62-67.
[24] HU H, ZHAO Z B, WAN W B, et al. Ultralight and highly compressible graphene aerogels[J]. Advanced Materials, 2013, 25(15):2219-2223.
[25] AI L H, ZHANG C Y, CHEN Z L. Removal of methylene blue from aqueous solution by a solvothermal-synthesized graphene/magnetite composite[J]. Journal of Hazardous Materials, 2011, 192(3):1515-1524.
[26] DHODAPKAR R, RAO N N, PANDE S P, et al. Removal of basic dyes from aqueous medium using a novel polymer:jalshakti[J]. Bioresource Technology, 2006, 97(7):877-885.
[27] FERRERO F. Dye removal by low cost adsorbents:hazelnut shells in comparison with wood sawdust[J]. Journal of Hazardous Materials, 2007, 142(1-2):144-152.
[28] KUMAR K V, PORKODI K. Relation between some two-and three-parameter isotherm models for the sorption of methylene blue onto lemon peel[J]. Journal of Hazardous Materials, 2006, 138(3):633-635.
[29] KAVITHA D, NAMASIVAYAM C. Experimental and kinetic studies on methylene blue adsorption by coir pith carbon[J]. Bioresource Technology, 2007, 98(1):14-21.
[30] MA T T, CHANG P R, ZHENG P W, et al. Fabrication of ultra-light graphene-based gels and their adsorption of methylene blue[J]. Chemical Engineering Journal, 2014, 240(6):595-600.
[31] ABDEL SALAM M. Synthesis and characterization of novel manganese oxide nanocorals and their application for the removal of methylene blue from aqueous solution[J]. Chemical Engineering Journal, 2015, 270:50-57.
[32] WEBER W J, MORRIS J C. Kinetic of adsorption on carbon from solution[J]. Asce Sanitary Engineering Division Journal, 1963, 89(17):31-60.
[33] LANGMUIR I. The adsorption of gases on plain surface of glass, mica and platinum[J]. Journal of the American Chemical Society, 1918, 40(12):1361-1403.
[34] FREUNDLICH H M F. Over the adsorption in solution[J]. Z. Phys. Chem., 1906, 57:385-470.
[35] VASILIU S, BUNIA I, RACOVITA S, et al. Adsorption of cefotaxime sodium salt on polymer coated ion exchange resin microparticles:kinetics, equilibrium and thermodynamic studies[J]. Carbohydrate Polymers, 2011, 85(2):376-387.
[36] EBER T W, CHAKRAVORTI R K. Pore and solid diffusion models for fixed-bed adsorbers[J]. AIChE Journal, 1974,20(2):228-238.
[37] AMEED B H,AHAMD A A. Batch adsorption of methylene blue from aqueous solution by garlic peel,an agricultural waste biomass[J]. Journal of Hazardous Materials,2009,164(2/3):870-875.
[38] MONSES V,LEI S M,JIN B,et al. Kinetic study and equilibrium isotherm analysis of Congo Red adsorption by clay materials[J]. Chemical Engineering Journal,2009,148(2/3):354-364.