三硝基甲苯分子印迹微球的制备与应用

doi:10.16085/j.issn.1000-6613.2017-0948

化工进展 ›› 2018, Vol. 37 ›› Issue (02): 644-650.DOI: 10.16085/j.issn.1000-6613.2017-0948

三硝基甲苯分子印迹微球的制备与应用

吴萍, 蔡爽, 郭建良, 饶国宁

南京理工大学化工学院, 江苏南京 210094

收稿日期:2017-05-19 修回日期:2017-09-19 出版日期:2018-02-05 发布日期:2018-02-05
通讯作者: 饶国宁,讲师,研究方向为爆炸及其与目标的作用、装药结构安全性等。
作者简介:吴萍(1993-),女,硕士研究生。
基金资助:
国家自然科学基金青年基金（11102091）及江苏省社会公共安全科技协同创新中心青年基金项目。

Preparation and application of TNT molecularly imprinted microspheres

WU Ping, CAI Shuang, GUO Jianliang, RAO Guoning

School of Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094, Jiangsu, China

Received:2017-05-19 Revised:2017-09-19 Online:2018-02-05 Published:2018-02-05

摘要/Abstract

摘要： 以三硝基甲苯（TNT）为模板分子，丙烯酰胺（AM）为功能单体，采用沉淀聚合法制备分子印迹聚合物MIP。通过紫外光谱法研究TNT和AM之间的相互作用，结果表明TNT与AM之间作用力较强，有助于形成结构稳定、亲和性强的聚合物；利用扫描电镜观测不同制备条件下印迹聚合物的表观形貌，发现乙腈用量为100mL，缓慢的搅拌速率下制备的聚合物形貌较优异；利用红外光谱分析聚合物的结构特征，验证印迹聚合物的制备与模板分子的洗脱；平衡吸附实验表明，MIP对TNT的吸附存在两种作用位点并且吸附量随TNT初始浓度增加而增加；动力学吸附实验发现印迹聚合物对TNT的吸附速率远大于非印迹聚合物；选择性吸附实验中，MIP对TNT表现出较好的特异吸附性能，而对于TNT的结构类似物DNT、RDX吸附能力较差。

关键词: 三硝基甲苯, 分子印迹, 沉淀, 聚合, 吸附

Abstract: The molecularly imprinted polymers(MIP) were prepared by precipitation polymerization method using 2,4,6-trinitrotoluene(TNT) as the template molecule and acrylamide(AM) as the functional monomer. The interaction between TNT and AM was studied by UV spectroscopy. It was found that TNT and AM had a strong force, which could help to form MIP with stable structure and binding ability. The morphologies of the polymers were observed by scanning electron microscopy (SEM). It was found that the polymers prepared with 100mL acetonitrile under slow stirring were better than others. The equilibrium adsorption experiments showed that there were two kinds of adsorption sites and the adsorption capacity increased with the increase of initial concentration of TNT. Kinetic adsorption experiments showed that the adsorption rate of MIP was much quicker than that of non-imprinted polymers(NIP). Meanwhile, the specific adsorption of MIP was also tested. The results showed that MIP had strong specific adsorption properties to TNT, while the adsorption to the structural analogues of TNT(DNT and RDX) was quite weak.

Key words: 2,4,6-trinitrotoluene (TNT), molecular imprinting, precipitation, polymerization, adsorption

中图分类号:

TQ31

吴萍, 蔡爽, 郭建良, 饶国宁. 三硝基甲苯分子印迹微球的制备与应用[J]. 化工进展, 2018, 37(02): 644-650.

WU Ping, CAI Shuang, GUO Jianliang, RAO Guoning. Preparation and application of TNT molecularly imprinted microspheres[J]. Chemical Industry and Engineering Progress, 2018, 37(02): 644-650.

参考文献

[1] 谭天伟. 分子印迹技术及应用[M]. 北京:化学工业出版社, 2010. TAN T W. Molecular imprinting technology and its application[M]. Beijing:Chemical Industry Press, 2010.
[2] 高大明. 二氧化硅纳米粒子表面的分子印记识别和TNT的荧光探测[D]. 合肥:中国科学技术大学, 2007. GAO D M. Molecule imprinting recognition and fluorescence detection for TNT at surface of silica[D]. Hefei:University of Science and Technology of China, 2007.
[3] CHEN L, LI B. ChemInform abstract:application of magnetic molecularly imprinted polymers in analytical chemistry[J]. ChemInform, 2012, 43(44):2613-2621.
[4] GIUSEPPE V, DEL S R, LUCIA M, et al. Molecularly imprinted polymers:present and future prospective[J]. International Journal of Molecular Sciences, 2011, 12(9):5908.
[5] LIU F, ZHANG S, WANG G, et al. A novel bifunctional molecularly imprinted polymer for determination of Congo red in food[J]. RSC Advances, 2015, 5(29):22811-22817.
[6] 肖淑娟,李红霞,于守武. 分子印迹固相萃取法提取花生壳中木犀草素[J]. 化工进展, 2010, 29(2):293-296. XIAO S J, LI H X, YU S W. Solid-phase extraction of luteolin from peanut hull using molecular imprinted polymers[J]. Chemical Industry and Engineering Progress, 2010, 29(2):293-296.
[7] OH J K, DRUMRIGHT R, SIEGWART D J, et al. The development of microgels/nanogels for drug delivery applications[J]. Progress in Polymer Science, 2008, 33(4):448-477.
[8] 栾崇林,李铭杰,李仲谨,等. 分子印迹电化学传感器的研究进展[J]. 化工进展, 2011, 30(2):353-358. LUAN C L, LI M J, LI Z J, et al. Progress of molecularly imprinted electrochemical sensor[J]. Chemical Industry and Engineering Progress, 2011, 30(2):353-358.
[9] MURATSUGU S, TADA M. Molecularly imprinted Ru complex catalysts integrated on oxide surfaces[J]. Accounts of Chemical Research, 2013, 46(2):300.
[10] 刘建明,李红红,熊振湖. 核-壳表面磁性印迹聚合物的制备及其对水中双酚A的特异性去除[J]. 环境科学, 2013, 34(6):2240-2248. LIU J M, LI H H, XIONG Z H. Removal of bisphenol a in aqueous solutions by core-shell magnetic molecularly imprinted polymers[J]. Environmental Science, 2013, 34(6):2240-2248.
[11] 杜自卫,刘学涌,赵小东. TNT分子印迹聚合物微球的合成与性能研究[J]. 高分子学报, 2010, 1(3):360-365. DU Z W, LIU X Y, ZHAO X D. Preparation and properties of TNT imprinted polymer microspheres[J]. Acta Polymerica Sinica, 2010(3):360-365.
[12] 谢成根. 纳米结构TNT分子印迹探针及其仿生敏感性能研究[D]. 合肥:安徽大学, 2007. XIE C G. Study on nanostructured TNT-imprinted probes and their biomimetic sensitivity properties[J]. Hefei:Anhui University, 2007.
[13] PARDESHI S, DHODAPKAR R, KUMAR A. Molecularly imprinted microspheres and nanoparticles prepared using precipitation polymerisation method for selective extraction of gallic acid from Emblica officinalis[J]. Food Chemistry, 2014, 146(1):385-393.
[14] PARDESHI S, SINGH S K. ChemInform abstract:precipitation polymerization:a versatile tool for preparing molecularly imprinted polymer beads for chromatography applications[J]. RSC Advances, 2016, 47(17):23525-23536.
[15] WANG J F, CORMACK P A G, SHERRINGTON D C, et al. Synthesis and characterization of micrometer-sized molecularly imprinted spherical polymer particulates prepared via precipitation polymerization[J]. Pure & Applied Chemistry, 2007, 79(9):1505-1519.
[16] 姚伟,高志贤,房彦军,等. 沉淀聚合法制备咖啡因分子印迹聚合物微球[J]. 化工进展, 2007, 26(6):869-872. YAO W, GAO Z X, FANG Y J, et al. Study on the synthesis and performance of caffeine molecularly imprinted polymer microspheres via precipitation polymerization[J]. Chemical Industry and Engineering Progress, 2007, 26(6):869-872.
[17] 庞思思, 王兵. 沉淀制备双酚A π-π堆积自组装印迹聚合物及其特异性识别机理研究[J]. 高分子学报, 2014(1):49-55. PANG S S, WANG B. Synthesis of bisphenol A π-π stacking self-assembly imprinted polymer by precipitation polymerization and study on specificity recognition mechanism[J]. Acta Polymerica Sinica, 2014(1):49-55.
[18] GAO D, ZHANG Z, WU M, et al. A surface functional monomer-directing strategy for highly dense imprinting of TNT at surface of silica nanoparticles[J]. Journal of the American Chemical Society, 2007, 129(25):7859.
[19] 杨卫海,严守雷,卫晨,等. 沉淀聚合法制备三聚氰胺分子印迹聚合物微球[J]. 高分子学报, 2010(10):1163-1169. YANG W H, YAN S L, WEI C, et al. Preparation of melamine molecularly imprinted polymer microspheres by precipitation polymerization[J]. Acta Polymerica Sinica, 2010(10):1163-1169.

三硝基甲苯分子印迹微球的制备与应用

Preparation and application of TNT molecularly imprinted microspheres

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	崔守成, 徐洪波, 彭楠. 两种MOFs材料用于O₂/He吸附分离的模拟分析[J]. 化工进展, 2023, 42(S1): 382-390.
[2]	陈崇明, 陈秋, 宫云茜, 车凯, 郁金星, 孙楠楠. 分子筛基CO₂吸附剂研究进展[J]. 化工进展, 2023, 42(S1): 411-419.
[3]	许春树, 姚庆达, 梁永贤, 周华龙. 共价有机框架材料功能化策略及其对Hg(Ⅱ)和Cr(Ⅵ)的吸附性能研究进展[J]. 化工进展, 2023, 42(S1): 461-478.
[4]	顾永正, 张永生. HBr改性飞灰对Hg⁰的动态吸附及动力学模型[J]. 化工进展, 2023, 42(S1): 498-509.
[5]	郭强, 赵文凯, 肖永厚. 增强流体扰动强化变压吸附甲硫醚/氮气分离的数值模拟[J]. 化工进展, 2023, 42(S1): 64-72.
[6]	王胜岩, 邓帅, 赵睿恺. 变电吸附二氧化碳捕集技术研究进展[J]. 化工进展, 2023, 42(S1): 233-245.
[7]	葛亚粉, 孙宇, 肖鹏, 刘琦, 刘波, 孙成蓥, 巩雁军. 分子筛去除VOCs的研究进展[J]. 化工进展, 2023, 42(9): 4716-4730.
[8]	林晓鹏, 肖友华, 管奕琛, 鲁晓东, 宗文杰, 傅深渊. 离子聚合物-金属复合材料（IPMC）柔性电极的研究进展[J]. 化工进展, 2023, 42(9): 4770-4782.
[9]	朱传强, 茹晋波, 孙亭亭, 谢兴旺, 李长明, 高士秋. 固体高分子脱硝剂选择性非催化还原NO _x 特性[J]. 化工进展, 2023, 42(9): 4939-4946.
[10]	杨莹, 侯豪杰, 黄瑞, 崔煜, 王兵, 刘健, 鲍卫仁, 常丽萍, 王建成, 韩丽娜. 利用煤焦油中酚类物质Stöber法制备碳纳米球用于CO₂吸附[J]. 化工进展, 2023, 42(9): 5011-5018.
[11]	李伯耿, 罗英武, 刘平伟. 聚合物产品工程研究内容与方法的思考[J]. 化工进展, 2023, 42(8): 3905-3909.
[12]	王报英, 王皝莹, 闫军营, 汪耀明, 徐铜文. 聚合物包覆膜在金属分离回收中的研究进展[J]. 化工进展, 2023, 42(8): 3990-4004.
[13]	姜晶, 陈霄宇, 张瑞妍, 盛光遥. 载锰生物炭制备及其在环境修复中应用研究进展[J]. 化工进展, 2023, 42(8): 4385-4397.
[14]	张振, 李丹, 陈辰, 吴菁岚, 应汉杰, 乔浩. 吸附树脂对唾液酸的分离纯化[J]. 化工进展, 2023, 42(8): 4153-4158.
[15]	于静文, 宋璐娜, 刘砚超, 吕瑞东, 武蒙蒙, 冯宇, 李忠, 米杰. 一种吲哚基超交联聚合物In-HCP对水中碘的吸附作用[J]. 化工进展, 2023, 42(7): 3674-3683.