化工进展 ›› 2016, Vol. 35 ›› Issue (S1): 48-52.DOI: 10.16085/j.issn.1000-6613.2016.s1.009

• 化工过程与装备 • 上一篇    下一篇

空气取水用套管式吸附床的吸附特性

杨凡, 张海全   

  1. 西南交通大学机械工程学院, 四川 成都 610031
  • 收稿日期:2016-04-07 修回日期:2016-05-03 出版日期:2016-06-30 发布日期:2016-07-08
  • 通讯作者: 杨凡(1992-),男,硕士研究生。E-mail yangfn92@163.com。

Experimental investigation of adsorption properties of double-pipe adsorption bed for water sorption from air

YANG Fan, ZHANG Haiquan   

  1. School of Mechanical Engineering, Southwest Jiaotong University, Chengdu 610031, Sichuan, China
  • Received:2016-04-07 Revised:2016-05-03 Online:2016-06-30 Published:2016-07-08

摘要: 为提升吸附式空气取水吸附床吸附性能,对套管式吸附床吸附性能的影响因素(风机功率和传质通道直径大小)进行实验分析。利用称重法分别测量不同因素影响下吸附床吸附量随时间变化情况。结果表明,为满足吸附床吸附要求,需对吸附床进行风机送风;吸附床吸附量随着风机功率增加而增加,最大提升约14.5%;随着传质通道直径加大而变大,最低提升约39.66%;相比于提升风机功率,提升传质通道直径能更好地提高吸附量,效果为提升风机功率的3倍以上。

关键词: 空气取水, 吸附, 套管式吸附床, 实验研究

Abstract: To improve the adsorption performance of adsorption bed for water vapor sorption from air, the related influencing factors (fan power and diameter of mass transfer channel) were investigated experimentally in this paper.The change of water sorption capacity with time under different influencing factors was measured via weighing method, respectively.The results showed that fan should be added to sorption bed to meet the requirement of sorption needs.The adsorption capacity of sorption bed rised about 14.5% as the fan power increases and it improved almost 39.66% with the increase of mass transfer channel diameter as well.Moreover, the size of mass transfer channel diameter had a bigger influence on sorption capacity compared to fan power, and the effect was more than 3 times of the fan power.

Key words: extracting water from air, adsorption, double-pipe adsorption bed, experimental investigation

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn