Chemical Industry and Engineering Progress ›› 2021, Vol. 40 ›› Issue (6): 3191-3196.DOI: 10.16085/j.issn.1000-6613.2020-1495

• Industrial catalysis • Previous Articles     Next Articles

Effect of impregnation method on hydrocracking performance of Ni-W/Y-ASA catalyst

GE Jiaqi1(), XIE Fangming2, LIU Siwei3, MA Yanlong1, LI Haiyan2, TIAN Hongyu2, SUN Famin2, LIU Baijun1()   

  1. 1.College of Chemical Engineering and Environmental, China University of Petroleum, Beijing 102249, China
    2.PetroChina Petrochemical Research Institute Daqing Petrochemical Research Center, Daqing 163714, Heilongjiang, China
    3.School of Science and Engineering, Chinese University of Hongkong, Shenzhen 518172, Guangdong
  • Received:2020-07-31 Revised:2020-09-16 Online:2021-06-22 Published:2021-06-06
  • Contact: LIU Baijun

浸渍方法对Ni-W/Y-ASA催化剂加氢裂化性能的影响

葛佳琪1(), 谢方明2, 刘思危3, 马艳龙1, 李海岩2, 田宏宇2, 孙发民2, 刘百军1()   

  1. 1.中国石油大学(北京)化学工程与环境学院,北京 102249
    2.中国石油石油化工研究院大庆化工研究中心,黑龙江 大庆 163714
    3.香港中文大学(深圳)理工学院,广东 深圳 518172
  • 通讯作者: 刘百军
  • 作者简介:葛佳琪(1991—),女,博士研究生,研究方向为加氢裂化催化剂。E-mail:18811151977@163.com

Abstract:

Amorphous silica alumina (ASA) with high surface area and modified Y zeolite (USY) were used to prepare the carrier of a series of Ni-W/Y-ASA catalysts, which were prepared by traditional impregnation method, aluminum sol impregnation method, USY powder impregnation method and ASA powder impregnation method. N2 adsorption-desorption, SEM, NH3-TPD, Py-IR and particle strength tester were used to explore the texture, morphology, acidity properties and mechanical strength of the catalysts prepared by different impregnation methods, and the prepared catalysts were applied to the hydrocracking reaction of n-decane. The Ni-W/Y-ASA catalyst prepared by ASA powder impregnation method retained more acidic sites on USY and had the maximum Br?nsted acid content, which enhanced the acid properties of the catalyst and thus improved its cracking activity.

Key words: impregnation method, hydrogenation, catalyst, Y-zeolite, amorphous silica alumina

摘要:

以高比表面积无定形硅铝(ASA)和改性Y型分子筛(USY)为原料制备催化剂载体,分别采用传统浸渍法、铝溶胶浸渍法、USY粉体浸渍法和ASA粉体浸渍法制备Ni-W/Y-ASA催化剂。采用氮气吸附-脱附、扫描电镜(SEM)、氨气程序升温脱附(NH3-TPD)、吸附吡啶原位红外(Py-IR)和颗粒强度测定仪等表征手段,探究不同的浸渍方法对催化剂的织构性质、形貌、酸性以及机械强度的影响,并将制备的催化剂应用于正癸烷的加氢裂化反应。结果表明,采用ASA粉体浸渍方法,因较多地保留了Ni-W/Y-ASA催化剂中USY粉体上的B酸性位,使催化剂具有最多的B酸含量,增强了催化剂的酸性质,进而提高了催化剂在以正癸烷为模型化合物的加氢裂化反应中的裂化活性。

关键词: 浸渍方法, 加氢, 催化剂, Y型分子筛, 无定形硅铝

CLC Number: 

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd