Review of the research of aging modeling and life prediction for HTPB propellant

doi:10.16085/j.issn.1000-6613.2016.s2.037

Abstract

Abstract: HTPB composite solid propellant is the power source of the rocket engine,which storage life and performance determine the life and combat performance of the rocket engine,therefore the research of HTPB composite solid propellant storage aging model and life prediction has important military and economic significance.In this paper,the research progress of the domestic and international research methods for composite solid propellant storage aging performance is introduced and the research progress on modeling of storage life at home and abroad is reviewed.In view of the potential problems in the actual storage of propellant,the development trend of future storage life prediction is predicted.Research results show that,the application of modern instrument can make up the deficiency of the traditional instrument in the research on the aging property of solid propellant,but there are still some shortcomings such as single means of research,error of testing method and without unified system. The propellant aging process is relatively complex,and the combination of structural integrity analysis and aging test can make a systematic study on the storage performance and life prediction of propellant,and the results obtained are more accurate and reliable.Segmented aging modeling is a new direction for the research of the prediction of propellant storage life,which has great development space.

Key words: composite solid propellant, storage aging, review, aging modeling, life prediction

摘要： HTPB复合固体推进剂是火箭发动机的动力之源，其贮存寿命和性能优劣决定了火箭发动机的寿命和作战性能的发挥，因而研究HTPB复合固体推进剂的贮存老化模型及寿命预估具有重要的军事和经济意义。本文对复合固体推进剂贮存老化性能的研究方法进行了介绍，并综述了国内外贮存寿命老化建模的研究进展，针对推进剂实际贮存可能出现的问题对未来贮存寿命预估的发展趋势进行了预测。研究结果表明，现代仪器的运用可以弥补传统仪器在固体推进剂老化性能研究上的不足，但是还存在研究手段单一、测试方法存在误差、没有形成统一的系统等缺点；推进剂的老化过程比较复杂，结构完整性分析和老化试验相结合的方法可以对推进剂贮存性能和寿命预估进行系统性的研究，得到的结果更准确，可靠性更高。分段老化建模作为推进剂寿命预估研究的新方向，具有很大的发展空间。

关键词: 复合固体推进剂, 贮存老化, 综述, 老化建模, 寿命预估

CLC Number:

V512⁺.3

DU Yongqiang, ZHENG Jian, PENG Wei, ZHANG Xiao, GU Zhixu. Review of the research of aging modeling and life prediction for HTPB propellant[J]. Chemical Industry and Engineering Progree, 2016, 35(S2): 219-224.

杜永强, 郑坚, 彭威, 张晓, 顾志旭. HTPB推进剂贮存老化建模及寿命预估研究综述[J]. 化工进展, 2016, 35(S2): 219-224.

References

[1] 侯林法,等.复合固体推进剂[M].北京:宇航出版社,1994:349-350.
[2] 张炜,等.火箭推进剂[M].北京:国防工业出版社,2014:143-144.
[3] LOYD D K.Long range service life analysis(LRSLA)system trend analysis life estimating procedure[R]. Cincinnati,OH:AIAA,1976.
[4] HUBNER C,GEIBLER E,ELSNER P.The importance of micromechanical phenomena in energetic material[J]. Propellant,Explosives,Pyrotechnics,1999,24(3):119-125.
[5] JIMMY D C,SEEMA S,DARRYL Y S,et al. Autonomous optical sensor system for the monitoring of nitrogen dioxide from aging rocket propellant[R].SAND2001-2953,2001.
[6] HUANG Weidong.Mechanical property prediction method for a htpb propellant aging[R].Cincinnati,OH:AIAA,2007.
[7] SARA Cerri,MANFRED A.Bohn,KLAUS Menke.Aging of HTPB/AI/AP rocket propellant formulations investigated by DMA measurements propellant[J].Explosives,Pyrotechnics, 2013,38(2):190-198.
[8] NEVIERE R,GUYADER M.DMA:a powerful technique to assess ageing of MED[C]//37th International Annual Conference of ICT.Karlsruhe,Germany,2006.
[9] STEPHENS W D,SCHWARZ W W,KRUSE R B,et al.Application of fourier transform spectroscopy to propellant service life prediction[R].Cincinnati,OH:AIAA,1976.
[10] DUNCAN E J S.Characterization of glycidyl azide ploymer composite propellant:strain rate effects and relaxation response[J].Journal of Applied Polymer Science,1995,56(3):365-375.
[11] DUNCAN E J S,BROUSSEAU P.Comparison of the uniaxial tensile modulus and dynamic shear storage modulus of a filled ahaydroxyl-terminated polybutadiene and GAP propellant[J].Journal of Materials Science,1996,31(5):1275-1284.
[12] 阳建红,俞茂宏,侯根良,等.HTPB复合固体推进剂含损伤和老化本构研究[J].推进技术,2002,23(06):509-512.
[13] 张昊,庞爱民,彭松.方坯药预测寿命与发动机推进剂药柱实际寿命差异研究[J].固体火箭技术,2005,28(01):53-56.
[14] 李松年,刘勇,王罗新,等.HTPB推进剂储存老化性能试验研究[J].推进技术,2006,27(5):473-476.
[15] 丁彪,张旭东,刘著卿,等.HTPB推进剂交变温度加速老化与自然贮存相关性[J].含能材料,2011,19(1):50-54.
[16] 唐国金,申志彬,田四朋,等.固体火箭发动机药柱概率贮存寿命预估[J].兵工学报,2012,33(3):301-306.
[17] 庞爱民.固体火箭推进剂理论与工程[M].北京:中国宇航出版社,2014:527-528.
[18] CELINA M,GILLEN K T,ASSINK R A.Accelerated aging and lifetime prediction:review of non-Arrhenius behaviour due to two competing processes[J].Polymer Degradation & Stability,2005,90(3):395-404.
[19] CELINA M,GRAHAM AC,GILLEN KT,et al.Thermal degradation studies of a polyurethane propellant binder[J]. Rubber Chemistry & Technology,2000,73(4):678-693.
[20] CELINA M,WISE J,OTTESEN DK,et al.Correlation of chemical and mechanical property changes during oxidative degradation of neoprene[J].Polymer Degradation & Stability,2000,68(99):171-184.
[21] GILLEN KT,CELINA M,BEMSTEIN R.Review of the ultrasensitive oxygen consumption method for making more reliable extrapolated predictions of polymer lifetimes[J].Ann Tech.Conf.Soc.Plast.Eng.,2004,62(2):2289-2293.
[22] BEMSTEIN R,DERZON D K,GILLEN K T.Nylon 6.6 accelerated aging studies:thermal-oxidative degradation and its interaction with hydrolysis[J].Polymer Degradation & Stability,2005,88(3):480-488.
[23] 陈西战,徐颖军,王鹏.基于凝胶百分数的推进剂贮存寿命及其可靠性分析[J].火工品,2007(1):1-4.
[24] 王国强,史爱娟,丁黎,等.丁羟推进剂的热加速老化力学性能及寿命预估[J].火炸药学报,2015,38(1):47-50.
[25] 高大元,何碧,何松伟,等.Arrhenius方法的局限性讨论[J].含能材料,2006,14(2):132-135.
[26] GILLEN KT,BEMSTEIN R,CELINA M.Non-Arrhenius behavior for oxidative degradation of chlorosulfonated polyethylene materials[J].Polymer Degradation & Stability,2005,87(2):335-346.
[27] GILLEN KT,BEMSTEIN R,DERZON D K.Evidence of non-Arrhenius behavior from laboratory aging and 24-year field aging of polychloroprene rubber materials[J].Polymer Degradation & Stability,2005,87(1):57-67.
[28] GILLEN KT,CELINA M.The wear-out approach for predicting the remaining lifetime of materials[J].Office of Scientific & Technical Information Technical Reports,2000,71(1):15-30.
[29] El-MAZRY C,HASSINE M B,CORREC O,et al. Thermal oxidation kinetics of additive free polyamide 6-6[J]. Polymer Degradation & Stability,2013,98(1):22-36.
[30] 陈海建,滕克难,李波,等.基于修正Arrhenius方法的SRM药柱储存寿命预估[J].弹箭与制导学报,2011,31(04):232-235.
[31] 傅惠民,杨立保,林逢春,等.固体推进剂贮存寿命整体预测方法[J].机械强度,2007,29(5):754-759.
[32] 张昊,罗怀德,杜娟.线性活化能法预估推进剂贮存寿命研究[J].固体火箭技术,2002,25(2):56-58.
[33] LAYTON L.Chemical structural aging studies on HTPB propellant[R].AD-A010731,1975.
[34] CUNLIFFE A V,TOD QINETIQ D A,SEVENOAKS G B.Sol fraction measurements-a tool to study cross-linking and ageing in composite propellant and PBXs[C]//37th International Annual Conference of ICT.Karlsruhe,Germany,2006.
[35] 王春华,彭网大,翁武军,等.HTPB推进剂贮存寿命的理论预估[J].推进技术,2000,21(3):63-66.
[36] 罗怀德,张昊,杜娟.固体推进剂使用寿命快速预测探索研究[J].固体火箭技术,2000,23(1):31-35.
[37] 杨根,赵永俊,张炜,等.HTPB推进剂贮存期预估模型研究[J].固体火箭技术,2006,29(4):283-285.
[38] 杨根.N-15B推进剂热老化特性与贮存寿命预估研究[D].长沙:国防科学技术大学,2005.
[39] 庄建华,刘纪涛,张为华,等.高能固体推进剂贮存寿命可靠性评估[J].弹箭与制导学报,2008,28(3):169-172.
[40] 杨继坤,徐廷学,董琪,等.固体火箭发动机装药贮存寿命预测方法[J].推进技术,2013,34(3):416-421.
[41] ANDERS Thorin.Influence of prestrain on mechanical properties of highly-filled elastomers:measurements and modeling[J].Polymer Testing,2012,31(8):978-986.
[42] 张昊,彭松,庞爱民.固体推进剂应力和应变与使用寿命关系[J].推进技术,2006,27(4):372-375.
[43] 邹思斯,严聪,马岑睿,等.定应变下HTPB推进剂延伸率二元回归模型[J].弹箭与制导学报,2013,33(4):131-133.
[44] 张磊,常新龙,赖建伟.基于湿热加速老化试验的HTPB固体推进剂寿命预估[J].弹箭与制导学报,2010,30(1):148-150.
[45] 李进贤,莫文宾,唐金兰.固体推进剂力学性能预估研究[J].计算机仿真,2011,28(1):76-79.
[46] CELINA M,WISE J,OTTESEN D K,et al.Oxidation profiles of thermally aged nitrile rubber[J].Polymer Degradation & Stability,1998,60(2):493.
[47] CELINA M C,DAYILE A R,QUINTANA A.A perspective on the inherent oxidation sensitivity of epoxy materials[J].Polymer,2013,54(13):3290-3296.
[48] WISE J,GILLEN K T,CLOUGH R L.Quantitative model for the time development of diffusion-limited oxidation profiles[J].Polymer,1997,38(8):1929-1944.
[49] BERTRAND Roduit,MARCO Hartmann,PATRICK Folly,et al.Prediction of thermal stability of materials by modified kinetic and model selection approaches based on limited amount of experimental point[J].Thermochimica Acta,2014,579(5):31-39.
[50] 周洁,姚军,宋燕.基于分段非线性Arrhenius的贮存寿命评估方法[J].北京航空航天大学学报,2015,41(4):744-750.