Chemical Industry and Engineering Progress ›› 2017, Vol. 36 ›› Issue (09): 3380-3387.DOI: 10.16085/j.issn.1000-6613.2017-0157

Previous Articles     Next Articles

Preparation of MnO2 nanomaterials in hydrothermal method and applied in hydrogen peroxide sensing

JIN Fuya1, YU Lin1, LAN Bang1,2, CHENG Gao1, SUN Ming1, ZHENG Xiaoying1   

  1. 1 School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006, Guangdong, China;
    2 Guangdong Meizhou Quality & Metrology Supervision and Testing Institution, Meizhou 514072, Guangdong, China
  • Received:2017-01-22 Revised:2017-05-15 Online:2017-09-05 Published:2017-09-05

水热法制备二氧化锰及在过氧化氢传感器中的应用

靳福娅1, 余林1, 蓝邦1,2, 程高1, 孙明1, 郑小颖1   

  1. 1 广东工业大学轻工化工学院, 广东 广州 510006;
    2 广东省梅州市质量计量监督检测所, 广东 梅州 514072
  • 通讯作者: 余林,教授,主要研究方向为催化新反应、催化新材料、电催化氧还原反应和超级电容器等领域。
  • 作者简介:靳福娅(1992-),女,硕士研究生。E-mail:timegoneby@163.com
  • 基金资助:
    国家自然科学基金(21576054)、广东省科技计划(2014A010106030,2016A010104017,2016B020241003)及广东省质监局科技计划(2017ZZ07)项目。

Abstract: A series of manganese dioxide,namely urchin α-MnO2,α-MnO2 nanowires and β-MnO2 nanorods were synthesized using hydrothermal method by changing raw materials such as KMnO4、MnSO4、Na2S2O8,etc. The MnO2 materials were characterized by X-ray diffraction(XRD),scanning electron microscope(SEM),and N2 adsorption-desorption measurements. A novel hydrogen peroxide (H2O2)sensor was fabricated by coating the mixture of Nafion and nanomaterials on a glassy carbon electrode(GCE). The performances of the modified electrode was investigated using cyclic voltammetry(CV)and chronoamperometry current-time response(I-t). The test results indicated that the urchin α-MnO2 nanowires based sensor exhibited the best electro catalytic activity towards the reduction of H2O2 with a sensitivity of 26.2μA·L/mmol. And the reduction peak currents of H2O2 were linear to their concentrations in the range of 2×10-6mol/L to 0.14×10-3mol/L wih a lowest limit of detection of 0.57×10-6mol/L(S/N=3).

Key words: manganese oxide, hydrothermal method, Nafion, hydrogen peroxide (H2O2), electrochemical sensor

摘要: 以高锰酸钾、硫酸锰、过硫酸钠等为原料,采用水热法合成了一系列二氧化锰(MnO2)催化剂,通过X射线衍射分析(XRD)、扫描电镜(SEM)以及N2吸附-脱附等手段进行了表征。后将一定量的二氧化锰材料与Nafion混合后滴涂于玻碳电极(GCE)表面,构成了一系列新型的过氧化氢传感器。并采用循环伏安法(CV)和计时电流法(I-t)分别对修饰电极进行表征,考察其相应的传感性能。结果表明,海胆状α-MnO2催化剂修饰的玻碳电极对过氧化氢有优异的电催化性能,其灵敏度为26.2μA·L/mmol。H2O2峰电流值在(2×10-6)~(0.14×10-3)mol/L范围内与浓度呈线性关系,最低检出限为0.57×10-6mol/L(S/N=3)。

关键词: 二氧化锰, 水热法, Nafion, 过氧化氢, 电化学传感器

CLC Number: 

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd