Chemical Industry and Engineering Progress ›› 2022, Vol. 41 ›› Issue (12): 6358-6363.DOI: 10.16085/j.issn.1000-6613.2022-0343

• Industrial catalysis • Previous Articles     Next Articles

FCC heavy cycle oil selective hydrogenation-catalytic cracking to produce more high value products

FANG Dong1(), HE Yi2, CUI Xiaochen2   

  1. 1.Petrochina North China Petrochemical Company, Renqiu 062550, Hebei, China
    2.Petrochina BHDC Downhole Services Company, Renqiu 062550, Hebei, China
  • Received:2022-03-07 Revised:2022-04-21 Online:2022-12-29 Published:2022-12-20
  • Contact: FANG Dong

FCC重循环油选择性加氢改质-催化裂化多产高附加值产品

方东1(), 何怡2, 崔笑晨2   

  1. 1.中国石油天然气股份有限公司华北石化分公司,河北 任丘 062550
    2.中国石油天然气股份有限公司渤海钻探工程有限公司井下作业分公司,河北 任丘 062550
  • 通讯作者: 方东
  • 作者简介:方东(1985—),男,博士,工程师,研究方向为炼化工艺开发、炼油总流程优化。E-mail:fang87543751@163.com

Abstract:

With the excess domestic diesel output and low gasoline demand, reducing the diesel-to-gasoline ratio and increasing the production of chemical products have become the preferred transformation route for refineries. In this work, based on the molecular structure, HCO was selectively hydrogenated to convert PAHs to crackable components, which were then cracked in an FCC unit. According to market demand, flexible adjustment between light oil and chemical feeds could be made. After selective hydrogenation of HCO, FCC conversion rate is up to 60.14%(mass ratio), and the yield of gasoline and diesel increased 19.16%(mass ratio) and 6.50%(mass ratio) from HCO, respectively. The total aromatics in gasoline is 56.8%(mass ratio), of which triphenyl is 21.3%(mass ratio), about 37% of the total aromatics. Moreover, the yields of heavy oil and coke decrease significantly.

Key words: petroleum, heavy cycle oil, reaction, fluid catalytic cracking, hydrogenation

摘要:

面对国内柴油产量过剩,汽油需求低迷新形势,降低柴汽比以及增产化工原料产品成为炼厂优选转型路线。催化裂化重循环油中含有大量多环芳烃,难以催化加工利用,成为炼厂转型升级的结构性难题。本研究从分子结构出发,提出先将重循环油进行选择性加氢,使重循环油中难以转化的多环芳烃转化为可裂化结构,然后再进行催化裂化,并根据市场需求,灵活调节装置以多产轻质油或化工原料等高附加值产品。研究表明,重循环油选择性加氢后,催化裂化转化率最高可提升至60.14%(质量分数);与加氢前相比,汽油和柴油收率分别增加了19.16%(质量分数)和6.50%(质量分数);汽油辛烷值最高可达95.6,此时汽油中总芳烃含量为56.8%(质量分数),其中三苯含量为21.3%(质量分数),约占总芳烃含量的37%;同时重油和焦炭产率大幅降低。

关键词: 石油, 重循环油, 反应, 催化裂化, 加氢

CLC Number: 

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd