Chemical Industry and Engineering Progress ›› 2022, Vol. 41 ›› Issue (10): 5501-5509.DOI: 10.16085/j.issn.1000-6613.2021-2501

• Materials science and technology • Previous Articles     Next Articles

Preparation and electrochemical properties of nitrogen-doped graphene/carbon nanotubes/amorphous carbon composites

ZHANG Yan1,2(), WANG Miao1,2, ZHAO Jiahui1,2, FENG Yu1,2(), MI Jie1,2()   

  1. 1.State Key Laboratory of Clean and Efficient Coal Utilization, Taiyuan University of Technology, Taiyuan 030024, Shanxi, China
    2.Key Laboratory of Coal Science and Technology, Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, Shanxi, China
  • Received:2021-12-07 Revised:2022-01-06 Online:2022-10-21 Published:2022-10-20
  • Contact: FENG Yu, MI Jie

氮掺杂石墨烯/碳纳米管/无定形炭复合材料制备及其电化学性能

张燕1,2(), 王淼1,2, 赵佳辉1,2, 冯宇1,2(), 米杰1,2()   

  1. 1.太原理工大学省部共建煤基能源清洁利用国家重点实验室,山西 太原 030024
    2.煤科学与技术教育部重点 实验室,山西 太原 030024
  • 通讯作者: 冯宇,米杰
  • 作者简介:张燕(1997—),女,硕士研究生,研究方向为碳纳米材料的制备及电化学。E-mail:3257269684@qq.com
  • 基金资助:
    山西省重大科技专项(MC2015-04)

Abstract:

Carbon matrix composites are considered to be one of the most promising electrode materials for the wide application of supercapacitors. In this paper, graphene oxide (GO), cobalt nitrate [Co(NO3)2] and melamine were used to prepared nitrogen-doped graphene/carbon nanotubes/amorphous carbon (NC) composites which by using the catalytic action of cobalt on pyrolytic carbon source at high temperature, and then NC electrochemical properties were tested. The effects of metal and melamine addition levels on the structure and properties of carbon matrix composites were investigated. It was found that when the addition levels were 0.02mmol and 0.3g, respectively, the prepared materials had large specific surface area (380.5m2/g) and nitrogen content (6.29%). When the current density was 0.5A/g, the material specific capacitance was 137.1F/g, respectively with and when the current density is 5A/g, the specific capacitance was 113.5F/g, and the retention rate was 88.5%, showing excellent rate performance. After 5000 cycles, the capacity retention rate of the material was 104%, indicating good cycle stability. It was attributed to the fact that the three-dimensional structure can accelerate the ion transfer and nitrogen doping during charge and discharge processes, which can improve the material wettability and contribute part of pseudo capacitance, providing theoretical reference for the preparation of electrode materials for supercapacitors.

Key words: graphene, carbonnanotubes, nitrogen doping, electrochemistry, composites, supercapacitors, nanomaterials, catalysis

摘要:

碳基复合材料被认为是超级电容器广泛应用最有前景的电极材料之一。本文使用氧化石墨烯(GO)、硝酸钴[Co(NO3)2]、三聚氰胺为原料,利用钴对高温下热解碳源的催化作用,制备得到了氮掺杂石墨烯/碳纳米管/无定形炭(NC)复合材料,并测试了其电化学性能。探究了金属和三聚氰胺添加量对碳基复合材料结构和性能的影响,研究发现,在添加量分别为0.02mmol和0.3g时,制得的样品具有大比表面积(380.5m2/g)和高掺氮质量分数(6.29%),并在三电极系统中体现出优异的电化学性能,电流密度为0.5A/g时样品的比电容为137.1F/g,5A/g时比电容为113.5F/g,保持率为88.5%,具有优异的倍率性能,在循环5000圈后样品的容量保持率为104%,具有良好的循环稳定性,这归因于三维结构可以加快充放电过程中的离子转移和氮掺杂可提高材料润湿性和贡献部分赝电容,为超级电容器电极材料的制备提供了理论借鉴。

关键词: 石墨烯, 碳纳米管, 氮掺杂, 电化学, 复合材料, 超级电容器, 纳米材料, 催化(作用)

CLC Number: 

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd