Chemical Industry and Engineering Progress ›› 2020, Vol. 39 ›› Issue (8): 3146-3162.DOI: 10.16085/j.issn.1000-6613.2019-1850

• Materials science and technology • Previous Articles     Next Articles

Progress on preparation and application of small-scale lignin particles

Kai CHEN1(), Yungeng QI1, Yanzhu GUO1, Shi WANG2, Haiming LI1()   

  1. 1.School of Light Industry Engineering and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, Liaoning, China
    2.School of Fashion, Dalian Polytechnic University, Dalian 116034, Liaoning, China
  • Online:2020-08-12 Published:2020-08-01
  • Contact: Haiming LI

小尺度木素颗粒的制备及其应用研究进展

陈凯1(), 齐云赓1, 郭延柱1, 王适2, 李海明1()   

  1. 1.大连工业大学轻工与化学工程学院,辽宁 大连 116034
    2.大连工业大学服装学院,辽宁 大连 116034
  • 通讯作者: 李海明
  • 作者简介:陈凯(1996—),男,硕士研究生,研究方向为植物资源化学与高值化利用。E-mail:1823446251@qq.com
  • 基金资助:
    2018年辽宁省高等学校创新人才项目;国家留学基金(201708210342)

Abstract:

Small-scale lignin particles are new products for high-value utilization of lignin. Due to their excellent physicochemical properties and potential application value, such as non-toxicity, corrosion resistance, antibiosis and antioxidation, they have attracted extensive attention and have been studied and developed by scientific researchers. In this paper, the preparation technologies of small-scale lignin particles, including self-assembly method, antisolvent method, interfacial polymerization/crosslinking method, high shear homogenization method, ultrasonic wave method, ultrasonic spray freezing method, microbial method and enzymatic method, etc., were reviewed. Subsequently, the preparation principle, preparation conditions and product characteristics of small-scale lignin particles prepared by different lignin raw materials and different methods were expounded. Then, the main preparation process parameters, physical and chemical characteristics and main size characterization methods of small-scale lignin particles were summarized and compared. In addition, the research progress on the application of small-scale lignin particles in ultra-violet protection, composite materials and drug delivery carriers was briefly introduced. In the end, the main problems existing in the preparation and application of small-scale lignin particles at the present stage and the future development direction were analyzed compendiously in order to provide reference for the research and development of lignin in forest resource deep processing and biomass-based nanomaterial science and technology.

Key words: biomass, lignin, nanoparticles, precipitation, colloid, preparation, composite material

摘要:

小尺度木素颗粒作为木素高值化利用的新产物,由于其无毒、耐腐蚀、抗菌和抗氧化等优异的物理化学特性和潜在的应用价值,引起了科研工作者的关注。本文介绍了小尺度木素颗粒的制备工艺(自组装法、反溶剂法、界面聚合/交联法、高剪切均质法、超声波法、超声喷雾冷冻法、微生物法和酶解法等),阐明了利用不同木素原料、不同方法制备小尺度木素颗粒的制备原理、制备条件以及产品特性。进一步对小尺度木素颗粒的主要制备工艺参数、物理化学特性及其粒径的主要表征手段进行了总结与比较。随后对其在紫外线防护、复合材料和药物运输载体方面的应用研究进展进行介绍。最后对其在现阶段存在的主要问题以及未来的发展方向进行简明分析,以期为木素在纳米材料科学技术领域的研究与开发提供借鉴。

关键词: 生物质, 木素, 纳米粒子, 沉淀, 胶体, 制备, 复合材料

CLC Number: 

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd