Chemical Industry and Engineering Progree ›› 2016, Vol. 35 ›› Issue (02): 624-628.DOI: 10.16085/j.issn.1000-6613.2016.02.044

Previous Articles     Next Articles

Method and characteristics of iron oxides coated on quartz sand surface

LIU Jun1, LOU Yuefeng2, LI Jun1,3   

  1. 1 College of Environment, Zhejiang University of Technology, Hangzhou 310014, Zhejiang, China;
    2 College of Educational Science and Technology, Zhejiang University of Technology, Hangzhou 310014, Zhejiang, China;
    3 College of Civil Engineering and Architecture, Zhejiang University of Technology, Hangzhou 310014, Zhejiang, China
  • Received:2015-08-03 Revised:2015-09-11 Online:2016-02-05 Published:2016-02-05

石英砂表面负载铁氧化物的方法和特性

刘俊1, 楼跃丰2, 李军1,3   

  1. 1 浙江工业大学环境学院, 浙江 杭州 310014;
    2 浙江工业大学教育科学与技术学院, 浙江 杭州 310014;
    3 浙江工业大学建筑工程学院, 浙江 杭州 310014
  • 通讯作者: 李军,教授,博士生导师,从事饮用水安全和水污染控制研究。E-mail:tanweilijun@zjut.edu.cn。
  • 作者简介:李军,教授,博士生导师,从事饮用水安全和水污染控制研究。E-mail:tanweilijun@zjut.edu.cn。

Abstract: A fluidized bed-Fenton process using quartz sand(0.5mm) as carrier was setup for iron oxides crystallization on the carrier's surface under the conditions of pH of 3.5,Fe2+/H2O2(molar ratio) of 2:1,influent of 1/3—1/2 design,and sequentially adding Fenton reagent. Uneven quartz sand surface and uniform fluidized state was beneficial to coating. At the same time the fluidized bed of highly efficient mass transfer further enhanced this process. The main components of iron oxides were FeOOH,Fe2O3,FeO and Fe2(SO4)3 according to X-ray diffraction(XRD) analysis. Simultaneously,this system also was used to treat organic silicone wastewater and synthesis pharmaceutical wastewater,COD and TOC removal rates could reach 80% and 85%,respectively,and the efficiency of Fe3+ removal reached 26% under optimum conditions.

Key words: quartz sand, fluidized-bed, Fenton, iron oxides, crystallization, wastewater

摘要: 以石英砂(0.5mm)为载体,建立流化床-Fenton系统,在pH值为3.5、Fe2+/H2O2摩尔比为2:1和进水量为试验装置设计进水量的1/3~1/2条件下,连续加入Fenton试剂,使得铁氧化物在载体表面结晶。这是因为凹凸不平的石英砂和均匀的流化状态有利于铁氧化物的覆膜,同时具有高效传质的流化床进一步强化覆膜过程。通过XRD分析可知,铁氧化物的主要成分是FeOOH、Fe2O3、FeO和Fe2(SO4)3。同时将此系统用于处理有机硅废水和合成制药废水,在优化操作条件下,COD和TOC的去除率可达80%和85%,总铁(Fe3+)的消减量达26%。

关键词: 石英砂, 流化床, Fenton法, 铁氧化物, 结晶, 废水

CLC Number: 

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd