化工进展 ›› 2021, Vol. 40 ›› Issue (5): 2685-2694.DOI: 10.16085/j.issn.1000-6613.2020-1087

• 材料科学与技术 • 上一篇    下一篇

基于纳米容器BTA@MSNs-PAA的智能防腐涂层的制备及性能

文家新(), 张欣, 刘云霞, 和志强, 屈琦超   

  1. 重庆工业职业技术学院,重庆 401120
  • 收稿日期:2020-06-15 出版日期:2021-05-06 发布日期:2021-05-24
  • 通讯作者: 文家新
  • 作者简介:文家新(1983—),男,博士,副教授,研究方向为材料腐蚀与防护。E-mail:18523976826@163.com
  • 基金资助:
    重庆市自然科学基金面上项目(cstc2020jcyj-msxmX1067)

Preparation and performance of smart anti-corrosion coating based on nanocontainers of BTA@MSNs-PAA

WEN Jiaxin(), ZHANG Xin, LIU Yunxia, HE Zhiqiang, QU Qichao   

  1. Chongqing Industry Polytechnic College, Chongqing 401120, China
  • Received:2020-06-15 Online:2021-05-06 Published:2021-05-24
  • Contact: WEN Jiaxin

摘要:

碳钢被广泛应用于工农业生产中,智能涂层的研究和应用为碳钢的腐蚀防护提供了新的途径。本文以正硅酸乙酯(TEOS)为原料,通过加入扩孔剂1,3,5-三甲苯(TMB)合成了大孔径的介孔SiO2纳米容器(MSNs),采用聚丙烯酸(PAA)对MSNs进行化学修饰制备了一种装载缓蚀剂苯并三氮唑(BTA)的pH敏感性智能纳米容器BTA@MSNs-PAA。通过扫描电子显微镜(SEM)、动态光散射粒径分析(DLS)、X射线衍射分析(XRD)、傅里叶红外光谱(FTIR)、热重/差热分析(TGA/DTA)和紫外可见光谱(UV-vis)对BTA@MSNs-PAA的结构和性能进行了表征。通过将BTA@MSNs-PAA掺杂到环氧树脂涂层中,在碳钢表面制备了一种智能防腐涂层,采用电化学阻抗谱(EIS)和盐雾加速腐蚀试验对智能涂层的防腐性能进行了评价。结果表明,BTA@MSNs-PAA近似呈球形且表面光滑,平均粒径为320nm。BTA@MSNs-PAA可通过PAA与BTA之间的静电相互作用装载BTA分子,其装载量可达16.49%,BTA@MSNs-PAA可响应酸性刺激而加速释放BTA分子。基于BTA@MSNs-PAA的智能防腐涂层对碳钢表现出显著的腐蚀防护性能,这可能是因为当碳钢基体发生腐蚀时,其腐蚀点位下降的pH触发纳米容器快速释放BTA分子,从而有效抑制了基体的进一步腐蚀。

关键词: pH敏感性, 纳米容器, 智能涂层, 碳钢, 腐蚀防护, 电化学阻抗谱

Abstract:

Carbon steel is widely utilized in industrial and agricultural processes. The study and application of the smart coating provide a new approach for the corrosion protection of carbon steel. In this work, mesoporous silica nanocontainers (MSNs) with large pore size were synthesized by using tetraethyl orthosilicate (TEOS) as the reactant through the addition of the pore-expanding agent of 1,3,5-trimethylbenzene (TMB). The prepared MSNs were modified by poly(acrylic acid) (PAA) to obtain the intelligent nanocontainers of BTA@MSNs-PAA with pH-sensitivity. The structure and performance of BTA@MSNs-PAA were characterized by scanning electron microscopy (SEM), dynamic light scattering analysis (DLS), X-ray diffraction analysis, infrared spectroscopy (FTIR), thermogravimetry/differential thermal analysis (TGA/DTA), and ultraviolet-visible spectroscopy (UV-vis). Meanwhile, the smart coating was fabricated on carbon steel through the dispersion of BTA@MSNs-PAA into epoxy resin. The protective properties of the smart coatings were evaluated by electrochemical impedance spectroscopy and salt spray accelerated experiments. The results showed that BTA@MSNs-PAA presented a near-spherical and smooth surface with an average diameter of 320nm. BTA@MSNs-PAA could load BTA by electrostatic interaction between PAA and BTA molecules. The amount of BTA loaded in BTA@MSNs-PAA is up to 16.49%. The releasing rate of BTA from BTA@MSNs-PAA can be accelerated under acidic conditions. The prepared coating presents remarkable anti-corrosion performance for carbon steel in NaCl corrosion medium, which may be because the releasing of BTA from BTA@MSNs-PAA is triggered by corrosion-induced pH decrease. Therefore, it can prevent the further corrosion of carbon steel substrate.

Key words: pH-sensitivity, nanocontainers, smart coating, carbon steel, corrosion protection, electrochemical impedance spectroscopy

中图分类号: 

版权所有 © 《化工进展》编辑部


本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn