化工进展 ›› 2017, Vol. 36 ›› Issue (11): 4189-4193.DOI: 10.16085/j.issn.1000-6613.2017-0080

• 材料科学与技术 • 上一篇    下一篇

增容剂对竹纤维/聚己内酯复合材料的界面增容及性能改善

龚新怀, 赵升云, 王兆礼, 饶瑞晔   

  1. 武夷学院生态与资源工程学院, 福建省竹材工程技术研究中心, 福建省生态产业绿色技术重点实验室, 福建 武夷山 354300
  • 收稿日期:2017-01-13 修回日期:2017-01-21 出版日期:2017-11-05 发布日期:2017-11-05
  • 通讯作者: 龚新怀(1985-),博士,讲师,主要从事生物质资源利用与复合材料研究。
  • 作者简介:龚新怀(1985-),博士,讲师,主要从事生物质资源利用与复合材料研究。E-mail:wyu_gxh@163.com。
  • 基金资助:
    国家自然科学基金(51406141),福建省科技厅平台项目(2014N2013),福建省科技厅引导性项目(2016H0031)及南平市科技计划产业支撑项目(N2015H02)。

Compatibilizer improving the interfacial compatibility and properties of bamboo fiber/polycaprolactone composites

GONG Xinhuai, ZHAO Shengyun, WANG Zhaoli, RAO Ruiye   

  1. Bamboo Engineering Technology Research Center of Fujian Province, Fujian Provincial Key Laboratory of Eco-Industrial Green Technology, Ecology and Resources Engineering College, Wuyi University, Wuyishan 354300, Fujian, China
  • Received:2017-01-13 Revised:2017-01-21 Online:2017-11-05 Published:2017-11-05

摘要: 以过氧化二异丙苯为引发剂,甲基丙烯酸缩水甘油酯(GMA)为单体,通过熔融反应制备了聚己内酯(PCL)接枝甲基丙烯酸缩水甘油酯(PCL-g-GMA),用傅里叶红外光谱(FTIR)和核磁共振氢谱(1H-NMR)表征了接枝物的化学结构,并以PCL-g-GMA为增容剂,考察了其添加对竹纤维/聚己内酯(BF/PCL)复合材料结构与性能的影响。研究结果表明,FTIR和1H-NMR分析结果证实了GMA已成功接枝到PCL上。PCL-g-GMA添加后,竹纤维与PCL的界面相容性得到明显改善,复合材料力学性能显著提升,吸水率下降。在PCL-g-GMA添加质量分数为10%时,复合材料拉伸强度、断裂伸长率比未增容BF/PCL复合材料分别增大了80%和70%。

关键词: 聚己内酯, 竹纤维, 甲基丙烯酸缩水甘油酯, 熔融反应, 增容剂

Abstract: Polycaprolactone-graft-glycidyl methacrylate(PCL-g-GMA) was synthesized by blending the melted PLA with GMA with dicumyl peroxide as initiator. The grafting copolymer was characterized by FTIR and 1H-NMR spectroscopic analyses. The effect of PCL-g-GMA addition on the structure and properties of bamboo fiber/polycaprolactone composite was investigated. The result showed that:the GMA was successfully grafted onto polycaprolactone,which was confirmed by FTIR and 1H-NMR spectroscopic analyses. The interfacial compatibility,mechanical and water absorption properties were greatly improved by PCL-g-GMA. When 10% content of PCL-g-GMA was addied,the bamboo fiber/polycaprolactone composite showed optimal mechanical properties,with an improvement of 80% in tensile strength and 70% in elongation at break,compared to those without PCL-g-GMA.

Key words: polycaprolacton, bamboo fiber, glycidyl methacrylate, melt blending, compatibilizer

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn