聚氨酯微孔膜的制备及其性能

doi:10.16085/j.issn.1000-6613.2016-1921

化工进展 ›› 2017, Vol. 36 ›› Issue (07): 2562-2567.DOI: 10.16085/j.issn.1000-6613.2016-1921

聚氨酯微孔膜的制备及其性能

贺贝贝, 解一军

河北工业大学化工学院, 天津 300130

收稿日期:2016-10-20 修回日期:2016-12-17 出版日期:2017-07-05 发布日期:2017-07-05
通讯作者: 解一军。
作者简介:贺贝贝(1991-),女,硕士研究生,从事功能高分子的合成与应用研究。E-mail:574926689@qq.com。

Preparation and performance of polyurethane microporous films

HE Beibei, XIE Yijun

College of Chemical Engineering, Hebei University of Technology, Tianjin 300130, China

Received:2016-10-20 Revised:2016-12-17 Online:2017-07-05 Published:2017-07-05

摘要/Abstract

摘要： 利用干法成膜工艺，分别以碳酸氢铵（NH₄HCO₃）、改性偶氮二甲酰胺（AC）发泡剂作为致孔剂制备具有防水透气性能的聚氨酯微孔膜。研究了不同种类致孔剂、致孔剂AC与活化剂ZnO比例、NH₄HCO₃用量以及反应条件对聚氨酯薄膜透湿性、孔隙率以及力学性能的影响，并使用金相显微镜对孔径大小及分布进行了表征。结果表明，加入致孔剂后的聚氨酯膜的透湿性、孔隙率等都有显著提高与改善，而且孔径大小适中，分布合理，力学性能仍旧满足使用要求。经NH₄HCO₃处理后的聚氨酯微孔膜的透湿性可达929g/（m²·24h）；改性AC发泡剂处理后的聚氨酯微孔膜的透湿性可达1064g/（m²·24h），比未处理的聚氨酯膜的透湿性分别提高了49.8%和71.6%。NH₄HCO₃和改性AC发泡剂具有优良的致孔性能，可以制备具有防水透气功能的聚氨酯微孔膜。

关键词: 致孔剂, 碳酸氢铵, 发泡剂, 聚氨酯微孔膜, 防水透气

Abstract: The waterproof and breathable polyurethane microporous films were prepared by dry film forming process using NH₄HCO₃ and the modified AC foaming agent individually as porogens.The effects of different kinds of porogens,the ratio of forming agent AC and activator ZnO,the dosage of NH₄HCO₃ and reaction conditions on the moisture permeability and mechanical properties of polyurethane film were investigated.Meanwhile,the pore size and distribution were characterized by polarized light microscope.The results show that the moisture permeability and porosity of polyurethane microporous film which has proper pore size and distribution have been significantly improved by adding porogens and the mechanical properties still meet the use requirement.The moisture permeability of polyurethane microporous films reached 929g/(m²·24h) and 1064g/(m²·24h) after treated with NH₄HCO₃ and modified AC foaming agent,respectively,which increased by 49.8% and 71.6% compared with the untreated polyurethane.In conclusion,NH₄HCO₃ and modified AC foaming agent have excellent pore forming performance and can be used to prepare polyurethane films with waterproof and breathable function.

Key words: porogen, ammonium acid carbonate (NH₄HCO₃), foaming agent, polyurethane microporous films, waterproof and breathable

中图分类号:

TS54
TS563

贺贝贝, 解一军. 聚氨酯微孔膜的制备及其性能[J]. 化工进展, 2017, 36(07): 2562-2567.

HE Beibei, XIE Yijun. Preparation and performance of polyurethane microporous films[J]. Chemical Industry and Engineering Progress, 2017, 36(07): 2562-2567.

参考文献

[1] 郁之义,李守财,武玉学,等. 防水透湿聚氨酯薄膜的研制[J]. 西部皮革,2016,38(15):54-56. YU Z Y,LI S C,WU Y X,et al. Preparation of waterproof and moisture permeable polyurethane film[J]. West Leather West Leath,2016,38(15):54-56.
[2] KRISHNAN S. Waterproof breathable polyurethane membranes and porous substrates protected therewith:US5208313[P]. 1993-05-04.
[3] 杜民慧,李建树,钟银屏. 防水透气聚氨酯薄膜及涂层的研究进展[J]. 聚氨酯工业,2003,18(1):1-4. DU M H,LI J S,ZHONG Y P. Advances in the study of waterproof and breathable polyurethane film and coating[J]. Polyurethane Industry,2003,18(1):1-4.
[4] HU Y,TOPOLKARAEV,HILTNER A,et al. Measurement of water vapor transmission rate in highly permeable film[J]. Journal of Applied Polymer Science,2001,81(7):1624-1633.
[5] 徐志磊,赵雨花,亢茂青,等. 聚氨酯多孔膜的结构和透湿性能研究[J]. 中国塑料,2004,18(6):62-66. XU Z L,ZHAO Y H,KANG M Q,et al. Study on the structure and water vapor permeation property of PU porous films[J]. China Plastics,2004,18(6):62-66.
[6] ZUO D Y,TAO Y Z,CHEN Y B,et al. Preparation and characterization of blend membranes of polyurethane and superfine chitosan powder[J]. Polymer Bulletin,2009,62(5):713-725.
[7] 王全杰,张玉洲,杨旸,等. 不同致孔剂对聚氨酯微孔膜通透性能的影响[J]. 精细化工,2010,27(10):23-28. WANG Q J,ZHANG Y Z,YANG Y,et al. Effect of different porogens on permeability of polyurethane microporous films[J]. Fine Chemicals,2010,27(10):23-28.
[8] 李万捷,杨晋,耿露,等. 无溶剂煤沥青粉填充聚氨酯防水材料制备和性能[J]. 化工进展,2008,27(11):1812-1815. LI W J,YANG J,GENG L,et al. Preparation and properties of polyurethane-coal pitch powder waterproof material without solvent[J]. Chemical Industry and Engineering Progress,2008,27(11):1812-1815.
[9] PARK H C,KIM Y P,KIM H Y,et al. Membrane formation by water vapor induced phase inversion[J]. Journal of Membrane Science,1999,156(2):169-178.
[10] SIMS G L A,JAAFAR H A S. A chemical blowing agent system (CBAS) based on azodicarbonamide[J]. Journal of Cellular Plastics,1994,30(2):175-188.
[11] ROWLAND D G,HUNTER B A,HANSEN L D. Blowing agent composition:US4655962[P]. 1987-04-07.
[12] 瞿波,张柳钦. AC发泡剂的发泡机理以及改性[J]. 化工管理,2013(22):61-62. QU B,ZHANG L Q. Foaming mechanism and modification of AC foaming agent[J]. Chemical Enterprise Management,2013(22):61-62..
[13] 张婕,史翎,张军营. 偶氮二甲酰胺热分解机理及氧化锌对其分解的影响[J]. 北京化工大学学报(自然科学版),2011,38(3):39-43. ZHANG J,SHI L,ZHANG J Y. The mechanism of thermal decomposition of azodicarbonamide and the the influence of zinc oxide[J]. Journal of Beijing University of Chemical Technology(Natural Science Edition),2011,38(3):39-43.
[14] 刘燕,周虎,范浩军,等. 不同致孔剂对PU合成革涂层透湿性的影响[J]. 中国皮革,2008(19):28-32. LIU Y,ZHOU H,FAN H J,et al. Influence of porogens on moisture permeability of polyurethane coating[J]. China Leather,2008(19):28-32.
[15] FURUTA T,YAGIHARA S,FURUTA T,et al. Exceltech^®:a polyamino acid-derivative,highly moisture-permeable,waterproof material[J]. Journal of Industrial Textiles,1990,20(1):11-23.
[16] 戴俊,陈焕懿,韦凌志. 聚氨酯/无机纳米复合材料研究进展[J]. 化工进展,2014,33(9):2380-2386. DAI J,CHEN H Y,WEI L Z. Research progress in polyurethane/inorganic nanomaterial composites[J]. Chemical Industry and Engineering Progress,2014,33(9):2380-2386.
[17] 谢富春,张玉清,朱长春. 防水透气聚氨酯薄膜及涂层的研究和应用[J]. 化学推进剂与高分子材料,2004,2(6):8-11. XIE F C,ZHANG Y Q,ZHU C C. Study and application of waterproof and moisture-permeable polyurethane film and coating[J]. Chemical Propellants & Polymeric Materials,2004,2(6):8-11.

聚氨酯微孔膜的制备及其性能

Preparation and performance of polyurethane microporous films

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 9

编辑推荐

Metrics

本文评价

[1]	郭雪梅, 王少娜, 杜浩, 冯曼, 郑诗礼, 张懿. 碳酸氢铵溶液中偏钒酸铵的冷却结晶[J]. 化工进展, 2018, 37(03): 853-860.
[2]	曾纪珺, 韩升, 唐晓博, 赵波, 郝志军, 张伟, 吕剑. 反式-1-氯-3,3,3-三氟丙烯的制备研究进展[J]. 化工进展, 2017, 36(11): 4132-4141.
[3]	高婷婷, 解利昕, 徐世昌, 冯丽媛, 杜亚威, 周晓凯. 碳酸氢铵为汲取液正渗透海水淡化研究[J]. 化工进展, 2017, 36(06): 2051-2056.
[4]	赵正创, 欧阳春发, 相旭, 高群. 微发泡聚合物材料的研究进展[J]. 化工进展, 2016, 35(S1): 209-215.
[5]	赵波，陆居有，毛伟，王博，吕剑. 氟代烃类发泡剂的研究进展[J]. 化工进展, 2014, 33(07): 1864-1870.
[6]	赵波，吕剑. (顺)-1,1,1,4,4,4-六氟-2-丁烯的合成研究进展[J]. 化工进展, 2014, 33(01): 193-197.
[7]	曹贤武，张轶钧，伍巍，吴鹏君. 碳酸氢钠的改性及其热分析[J]. 化工进展, 2012, 31(10): 2176-2182.
[8]	岳秀伟，张卫江，徐娇，赵毅青. 污泥微生物蛋白发泡剂的改性 [J]. 化工进展, 2011, 30(6): 1316-.
[9]	王程，霍冀川，雷永林，李娴，袁艳红，刘佳奇，高娟. 改性酵母蛋白制备混凝土发泡剂及其处理条件优化 [J]. 化工进展, 2011, 30(3): 621-.