化工进展 ›› 2015, Vol. 34 ›› Issue (08): 3110-3112,3123.DOI: 10.16085/j.issn.1000-6613.2015.08.032

• 精细化工 • 上一篇    下一篇

对甲氧基苯基硫脲的合成工艺

陶红玲, 张新慧, 钱阳, 丁浩, 陈天云   

  1. 合肥工业大学化学与化工学院, 安徽 合肥 230009
  • 收稿日期:2014-12-22 修回日期:2015-03-31 出版日期:2015-08-05 发布日期:2015-08-05
  • 通讯作者: 陈天云,教授,博士生导师,主要从事有机化学品合成与工程化研究。E-mail t-y99@163.com。
  • 作者简介:陶红玲(1989—),女,硕士研究生。

Synthetic process of 1-(4-methoxyphenyl)thiourea

TAO Hongling, ZHANG Xinhui, QIAN Yang, DING Hao, CHEN Tianyun   

  1. School of Chemistry and Chemical Engineering, Hefei University of Technology, Hefei 230009, Anhui, China
  • Received:2014-12-22 Revised:2015-03-31 Online:2015-08-05 Published:2015-08-05

摘要: 以对氨基苯甲醚、硫氰酸铵为原料在酸催化下制备了对甲氧基苯基硫脲,通过单因素实验方法研究了反应原料的配比、反应时间及反应温度等工艺参数对合成对甲氧基苯基硫脲收率的影响,获得的较佳合成工艺条件为:对氨基苯甲醚5.7g,硫氰酸铵3.1g,盐酸3.3mL,水量8mL,反应温度90℃,反应时间为9h。平行放大实验结果表明,产品的收率大于95%,产品的纯度为99.4%,红外光谱和核磁共振谱测试的结果表明所合成的化合物为对甲氧基苯基硫脲。该合成技术工艺过程简单,生产安全,环境友好,产品收率高,易于生产。

关键词: 对甲氧基苯硫脲, 对氨基苯甲醚, 硫氰酸铵

Abstract: 1-(4-methoxyphenyl)thiourea was effectively prepared from p-anisidine and ammonium thiocyanate with acidic catalyst. The effects of technical parameters on the yield of 1-(4-methoxyphenyl) thiourea were studied through single-factor experimental method, such as raw materials ratio, reaction time and reaction temperature, etc. The optimal condition was p-anisidine 5.7g, ammonium thiocyanat 3.1g, hydrochloric acid 3.3mL, water 8mL, reaction temperature 90℃, and reaction time 9h. The results of larger scale experiments proved that the average yield was 95% and the pureness was 99.4%. The FTIR and NMR spectrum suggest that the synthetic compounds was 1-(4-methoxyphenyl)thiourea. The process of this synthesis technology was facile, safe, environment friendly with high product yield and easy production.

Key words: 1-(4-methoxyphenyl)thiourea, p-anisidine, ammonium thiocyanate

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn