化工进展

• 工业催化 • 上一篇    下一篇

限制几何构型茂金属/硼化物催化1-癸烯齐聚及其产物表征

吕春胜,赵俊峰   

  1. 大庆石油学院化学化工学院
  • 出版日期:2009-08-05 发布日期:2009-08-05

Synthesis and characterization of oligomers from 1-decene catalyzed by metallocene catalyst with constrained geometry

LÜ Chunsheng,ZHAO Junfeng   

  1. School of Chemistry and Chemical Engineering,Daqing Petroleum Institute
  • Online:2009-08-05 Published:2009-08-05

摘要: 用限制几何构型的茂金属催化体系2-Me4Cp-4,6-tBu2-PhOTiCl2/Al(iBu)3/Ph3C+B(C6F5)4-对1-癸烯的齐聚进行了研究。探讨了Al与Ti摩尔比和反应温度对聚合反应的影响。用GC和13C NMR表征了聚合物组成和结构。结果表明,聚合物主要是二聚物、三聚物、四聚物、五聚物。该齐聚物具有高黏度指数(VI=238)、低凝点(≤-62℃)的性质,是理想的润滑油基础油组分。

Abstract: Oligomerization of 1-decene catalyzed by metallocene with constrained geometry, 2-Me4Cp-4, 6-tBu2-PhOTiCl2/Al(iBu)3/Ph3C+B(C6F5)4-, was studied. Effects of Al/Ti mole ratio and oligomerization temperature on 1-decene polymerization were investigated. The composition and structure of the obtained product were characterized by GC and 13C NMR methods. The results showed that the obtained product is a mixture mainly composed of dimer, trimer, tetramer and pentamer. This oligomer mixture has a high viscosity index (VI=238) and a low solidifying point (≤-62℃), which is a desired component for lubricant base oil.

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn