化工进展

• 能源加工与技术 • 上一篇    下一篇

乌桕籽油钾皂微波脱羧制备可再生烃类燃料

刘玉环1,2,马 雯1,2,王允圃1,2,阮榕生1,2,温平威2,万益琴1,2   

  1. 1 南昌大学生物质转化教育部工程研究中心,江西 南昌 330047;2 南昌大学食品科学与技术国家重点实验室,江西 南昌 330047
  • 出版日期:2013-10-05 发布日期:2013-10-05

Renewable hydrocarbon fuel prepared from microwave assisted decarboxylation of the potassium soap of Chinese tallow seed oil

LIU Yuhuan1,2,MA Wen1,2,WANG Yunpu1,2,RUAN Rongsheng1,2,WEN Pingwei2,WAN Yiqin1,2   

  1. 1Nanchang University,Engineering Research Center for Biomass Conversion,Ministry of Education,Nanchang 330047,Jiangxi,China;2Nanchang University,State Key Laboratory of Food Science and Technology,Nanchang 330047,Jiangxi,China
  • Online:2013-10-05 Published:2013-10-05

摘要: 乌桕籽的含油率高达40%,是生产生物柴油的优质原料。本研究采用绿色环保节能高效的乌桕籽油提取方法,以高压蒸汽作为水剂提取油脂的方法,进行了相关工艺的实验研究,以乌桕油脂皂化物为研究对象,通过微波极化皂化物羧基端促进脱羧制备优质烃类燃料。探讨了料液比、烘烤时间、烘烤温度、pH值、高压蒸汽处理时间等因素对油脂提取率的影响。微波裂解所得到液态产物为皂类干重的60%以上,裂解液态产物的密度为0.865 g/cm3,黏度2.73 mm2/s,与柴油的性质基本相似。研究结果为利用乌桕籽油生产生物柴油的工业化提供了一定基础。

关键词: 乌桕油脂, 水剂提油, 皂化物, 脱羧

Abstract: Chinese tallow seed contains as high as 40% oil. It is a good raw material for production of biodiesel. By microwave assisted decarboxylation of the potassium soap of Chinese tallow seed oil,renewable hydrocarbon fuel is obtained. In this efficient oil extraction process,high pressure vapor is used as extractor. In order to obtain a high extraction yield,some factors including solid/liquid ratio,baking time,baking temperature,pH value and high pressure processing time are investigated. The weight of microwave assisted pyrolysis liquid product is 60% of dry soap weight. The density of the liquid is 0.865 g/cm3 and the viscosity is 2.73 mm2/s,while its characteristic is similar to that of diesel fuel. Results in this study will give a useful information for the industrial production of biodiesel from Chinese tallow seed.

Key words: Chinese tallow seed oil, aqueous extraction oil, soap, decarboxylation

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn