化工进展

• 材料科学与技术 • 上一篇    下一篇

脲改性OEO低泡渗透剂的合成与性能

牛庆华,陈 骥,何志强,方 云   

  1. 江南大学化学与材料工程学院,食品胶体与生物技术教育部重点实验室,江苏 无锡 214122
  • 出版日期:2013-09-05 发布日期:2013-09-05

Syntheses and performances of novel low-foaming urea-modified penetrating agents from OEO

NIU Qinghua,CHEN Ji,HE Zhiqiang,FANG Yun   

  1. MOE Key Laboratory of Food Colloids and Biotechnology,School of Chemical & Material Engineering,Jiangnan University,Wuxi 214122,Jiangsu,China
  • Online:2013-09-05 Published:2013-09-05

摘要: 对辛/癸基聚氧乙烯醚(OEO)进行脲封端改性,合成了两种新型脲改性OEO低泡渗透剂,即氨基甲酸辛/癸基聚氧乙烯酯(OEO-U)和N,N-二甲氨基甲酸辛/癸基聚氧乙烯酯(OEO-DMU),采用FT-IR和1H NMR表征得到了预期的目标产物。脲与OEO在130 ℃下反应6 h获得OEO-U的收率高达93.2%;N,N-二甲基脲与OEO在DMF回流温度下反应6 h获得OEO-DMU的收率高达93.8%。考察了它们的起泡体积和渗透时间随温度或浓度的变化率以及相对OEO的比泡沫随时间的变化率。性能实验结果表明,两种脲改性渗透剂与原料的起泡力有以下关系:OEO-DMU

关键词: 渗透剂, 低泡, 辛/癸基聚氧乙烯醚, 脲改性, 封端反应

Abstract: Octyl/decyl polyethylene oxide (OEO) was modified by nitrogen-capping to improve its low-foaming property and maintain its excellent penetrating property in the meantime. Two novel penetrating agents,octyl/decyl polyethyleneoxide ether carbamate(OEO-U) and octyl/decyl polyethyleneoxide ether N,N-dimethyl carbamate(OEO-DMU) were synthesized from OEO and urea or N,N-dimethylurea,which was confirmed by FT-IR and 1H NMR. The JFD-U yield of 93.2% was obtained when OEO reacted with urea under 130 ℃ for 6 h,and the JFD-DMU yield of 93.8% was obtained when OEO reacted with N,N-dimethylurea under reflux temperature of DMF for 6 h. Both foaming volumes and penetrating times against concentrations of penetrating agents were investigated. Hydrolytic stabilities of these penetrating agents were expressed by means of the variation of foaming ratio of modified penetrating agents over OEO against time. The experimental results showed that foaming power of two novel penetrating agents compared with OEO as follows:OEO-DMU<OEO- U<OEO,and the order of penetrating power as follows:OEO-DMU<OEO-U≤OEO. Moreover,the foaming ratios of two novel penetrating agents were stable,which suggested that they have excellent hydrolytic stability.

Key words: penetrating agent, low-foaming, octyl/decyl polyethylene oxide, urea-modification, end capping

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn