氧化铁改性活性炭的制备及其吸附脱硫性能

化工进展

氧化铁改性活性炭的制备及其吸附脱硫性能

宋华1，2，王璐1，张娇静1，2，李锋1，2

1东北石油大学化学化工学院，黑龙江大庆 163318；2东北石油大学石油与天然气化工省重点实验室，黑龙江大庆 163318

出版日期:2013-03-05 发布日期:2013-03-05

Adsorption of H2S by iron oxide modified activate carbon

SONG Hua1，2，WANG Lu1，ZHANG Jiaojing1，2，LI Feng1，2

1Chemical Engineering，Northeast Petroleum University，Daqing 163318，Heilongjiang，China; 2Provincial Key Laboratory of Oil & Gas Chemical Technology，Northeast Petroleum University，Daqing 163318，Heilongjiang，China

Online:2013-03-05 Published:2013-03-05

摘要/Abstract

摘要： 制备了负载型氧化铁改性活性炭吸附剂，并采用比表面积（BET）、扫描电镜（SEM）技术对吸附剂进行了表征。在固定吸附床上考察了制备条件及吸附条件对吸附剂脱除硫化氢性能的影响。研究结果表明，负载氧化铁后吸附剂的比表面积由580.4 m2/g提高到658.6 m2/g，氧化铁改性能有效改善活性炭对硫化氢的吸附脱除能力。氧化铁与活性炭的质量比为1∶1，真空干燥温度为70 ℃，干燥时间为36 h时得到的负载氧化铁吸附剂的吸附效果最好。在吸附温度为60 ℃时，饱和硫容和脱硫率分别达到77.4 mg/g和99.2%。饱和硫容比未经改性的活性炭的提高了60.2 mg/g。

关键词: 脱硫, 硫化氢, 活性炭, 氧化铁, 吸附

Abstract: Iron oxide supported activate carbon adsorbents were prepared，and the adsorbents were characterized by scanning electron microscope (SEM) and specific surface area (BET). Effects of preparation condition and adsorption condition on the performance of hydrogen sulphide removal were studied using a fixed-bed adsorption column. Experiment results of showed that specific surface area of the activate carbon adsorbents after loading iron oxide increased from 580.4 m2/g to 658.6 m2/g，and the performance of hydrogen sulphide removal of absorbent was effectively improved by loading iron oxide over activate carbon. The absorbent with iron oxide to activate carbon mass ratio of 1∶1，vacuum drying temperature of 70 ℃ and drying time of 36 h was found to give the best performance. At the adsorption temperature of 60 ℃，the saturated sulfur capacity and desulfurization rate reached 77.4 mg/g and 99.2%，respectively. The saturated sulfur capacity was improved by 60.2 mg/g compared with unmodified activate carbon.

Key words: desulfurization, H2S, activate carbon, iron oxide, adsorption

宋华1，2，王璐1，张娇静1，2，李锋1，2. 氧化铁改性活性炭的制备及其吸附脱硫性能[J]. 化工进展.

SONG Hua1，2，WANG Lu1，ZHANG Jiaojing1，2，LI Feng1，2. Adsorption of H2S by iron oxide modified activate carbon[J]. Chemical Industry and Engineering Progree.

[1]	崔守成, 徐洪波, 彭楠. 两种MOFs材料用于O₂/He吸附分离的模拟分析[J]. 化工进展, 2023, 42(S1): 382-390.
[2]	陈崇明, 陈秋, 宫云茜, 车凯, 郁金星, 孙楠楠. 分子筛基CO₂吸附剂研究进展[J]. 化工进展, 2023, 42(S1): 411-419.
[3]	许春树, 姚庆达, 梁永贤, 周华龙. 共价有机框架材料功能化策略及其对Hg(Ⅱ)和Cr(Ⅵ)的吸附性能研究进展[J]. 化工进展, 2023, 42(S1): 461-478.
[4]	顾永正, 张永生. HBr改性飞灰对Hg⁰的动态吸附及动力学模型[J]. 化工进展, 2023, 42(S1): 498-509.
[5]	郭强, 赵文凯, 肖永厚. 增强流体扰动强化变压吸附甲硫醚/氮气分离的数值模拟[J]. 化工进展, 2023, 42(S1): 64-72.
[6]	盛维武, 程永攀, 陈强, 李小婷, 魏嘉, 李琳鸽, 陈险峰. 微气泡和微液滴双强化脱硫反应器操作分析[J]. 化工进展, 2023, 42(S1): 142-147.
[7]	王胜岩, 邓帅, 赵睿恺. 变电吸附二氧化碳捕集技术研究进展[J]. 化工进展, 2023, 42(S1): 233-245.
[8]	葛亚粉, 孙宇, 肖鹏, 刘琦, 刘波, 孙成蓥, 巩雁军. 分子筛去除VOCs的研究进展[J]. 化工进展, 2023, 42(9): 4716-4730.
[9]	杨莹, 侯豪杰, 黄瑞, 崔煜, 王兵, 刘健, 鲍卫仁, 常丽萍, 王建成, 韩丽娜. 利用煤焦油中酚类物质Stöber法制备碳纳米球用于CO₂吸附[J]. 化工进展, 2023, 42(9): 5011-5018.
[10]	张振, 李丹, 陈辰, 吴菁岚, 应汉杰, 乔浩. 吸附树脂对唾液酸的分离纯化[J]. 化工进展, 2023, 42(8): 4153-4158.
[11]	张丽宏, 金要茹, 程芳琴. 煤气化渣资源化利用[J]. 化工进展, 2023, 42(8): 4447-4457.
[12]	王云刚, 焦健, 邓世丰, 赵钦新, 邵怀爽. 冷凝换热与协同脱硫性能实验分析[J]. 化工进展, 2023, 42(8): 4230-4237.
[13]	张耀杰, 张传祥, 孙悦, 曾会会, 贾建波, 蒋振东. 煤基石墨烯量子点在超级电容器中的应用[J]. 化工进展, 2023, 42(8): 4340-4350.
[14]	姜晶, 陈霄宇, 张瑞妍, 盛光遥. 载锰生物炭制备及其在环境修复中应用研究进展[J]. 化工进展, 2023, 42(8): 4385-4397.
[15]	于静文, 宋璐娜, 刘砚超, 吕瑞东, 武蒙蒙, 冯宇, 李忠, 米杰. 一种吲哚基超交联聚合物In-HCP对水中碘的吸附作用[J]. 化工进展, 2023, 42(7): 3674-3683.