化工进展 ›› 2012, Vol. 31 ›› Issue (03): 580-585.

• 材料科学与技术 • 上一篇    下一篇

乙二醇双硬脂酸酯/PMMA核壳储能微胶囊制备

张艳辉1,2,邓建国2,黄奕刚1   

  1. 1西南科技大学材料科学与工程学院,四川 绵阳 621010
    2中国工程物理研究院化工材料研究所新材料研发中心,四川 绵阳 621900)
  • 出版日期:2012-03-05 发布日期:2012-03-05

Preparation of phase change material EGDS/PMMA
core-shell microcapsules

ZHANG Yanhui1,2DENG Jianguo2HUANG Yigang1   

  1. (1Material Science and Engineering College,Southwest University of Science and Technology,Mianyang 621010, Sichuan,China;2New Materials R & D Center,Institute of Chemical Materials, China Academy of Engineering Physics,Mianyang 621900,Sichuan,China)
  • Online:2012-03-05 Published:2012-03-05

摘要: 以BPO-DMA为氧化还原引发剂,在室温下悬浮聚合法制备了核壳结构的乙二醇双硬脂酸酯(EGDS)- PMMA相变材料微胶囊。采用扫描电镜(SEM)、红外光谱仪(FTIR)、差示扫描量热仪(DSC)和热重分析仪(TG)表征了核壳结构微胶囊的形貌、化学结构及热性能。结果表明,当BPO加入量为1%,DMA为0.2% 时,所得微胶囊成均匀球形,粒径分布在1~5 μm范围;微胶囊相变潜热随芯壳比的增加而增大,最大相变潜热达85.34 J/g,芯材含量达64.6%,且相变材料的热稳定性显著增强。

关键词: 聚甲基丙烯酸甲酯, 乙二醇双硬脂酸酯, 悬浮聚合, 相变储能材料

Abstract: Microencapsulated phase change materials(MicroPCMs)were synthesized through suspension polymerization using poly(methyl methacrylate)as the shell and ethylene glycole distearate(EGDS)as the core,and then the chemical structure,morphology,thermal storage and stability of microcapsules were investigated by FTIR,scanning electron microscope(SEM),differential scanning calorimetry(DSC)and thermogravimetry analysis(TGA). When the addition amounts of BPO and DMA were 1%,0.2% respectively,the surface morphology of microcapsules with diameter in the range of 1—5 μm were perfect and the thermal stability of MicroPCMs was good. The thermal properties of the microcapsules revealed that the largest content of the core material was up to 64.6 %,and the phase change enthalpy of microPCMs was about 85.34 J/g.

Key words: PMMA, ethylene glycole distearate(EGDS), suspension polymerization, phase change materials for energy storage

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn