化工进展

• 材料科学与技术 • 上一篇    下一篇

葡萄糖改性水性聚氨酯的合成与表征

杨 燕,沈一丁,赖小娟,王 磊   

  1. 陕西科技大学教育部轻化工助剂化学与技术重点实验室,陕西 西安 710021
  • 出版日期:2011-02-05 发布日期:2011-02-05

Synthesis and characterization of waterborne polyurethane modified by glucose

YANG Yan,SHEN Yiding,LAI Xiaojuan,WANG Lei   

  1. Key Laboratory of Auxiliary Chemistry & Technology for Chemical Industry,Ministry of Education,Shaanxi University of Science & Technology,Xi’an 710021,Shaanxi,China
  • Online:2011-02-05 Published:2011-02-05

摘要:

采用预聚体合成法,以二羟甲基丙酸(DMPA)、葡萄糖(PG)为亲水扩连剂和交联剂制备一种水性聚氨酯乳液。利用FTIR对胶膜结构进行表征,证实葡萄糖已引入聚氨酯主链。TG分析得出PG改性后的聚氨酯胶膜热稳定性增强。研究了PG用量对该聚氨酯胶膜力学性能的影响,结果表明:随着PG用量的增加,胶膜力学强度得到改善。当PG的用量由0增加至4.68%时,断裂伸长率从529.9%降至276.4%,拉伸强度从10.9 MPa增加至24.2 MPa

Abstract:

Waterborne polyurethaneWPUemulsion was synthesized by a prepolymer process using dimethylol propionic acidDMPAand glucose as hydrophilic agent and crosslinking agentrespectively. The structure of the films was confirmed by means of FTIR. The test results indicated that glucose was introduced into the main chain of polyurethane. TG analysis indicated that the thermal stability of WPU films modified with glucose was improved. The effect of glucose content on the mechanical properties of the WPU films was studied. The results showed that the properties of WPU films were improved with increasing weight of PG. When glucose content increased from 0 to 4.68%elongation at break decreased from 529.9% to 276.4% and tensile strength increased from 10.9 MPa to 24.2 MPa.

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn