化工进展

• 化工过程与装备 • 上一篇    下一篇

内混式扇形空气雾化喷嘴参数研究

蒋 斌1,3,王子云2,付祥钊3,王 勇3   

  1. 1西南科技大学土木工程与建筑学院,四川 绵阳 621010;2四川大学建筑与环境学院,四川 成都 610065;3重庆大学三峡库区生态环境教育部重点实验室 重庆 400045
  • 出版日期:2011-02-05 发布日期:2011-02-05

Numerical study on fan-shaped air-blast atomizer parameters

JIANG Bin1,3,WANG Ziyun2,FU Xiangzhao3,WANG Yong3   

  1. 1School of Civil Engineering and Architecture,Southwest University of Science and Technology,Mianyang 621010,Sichuan,China;2School of Architecture and Environment,Sichuan University,Chengdu 610065,Sichuan,China;3MOE Key Lab of Three Gorges Reservoir Region’s Eco-Environment,Chongqing University,Chongqing 400045,China
  • Online:2011-02-05 Published:2011-02-05

摘要:

采用Eulerian-Lagrangian耦合模型,对内混式空气雾化喷嘴性能进行了数值模拟,模拟结果表明:索特尔平均直径随气液质量流量比的增加,先逐渐减小,达到极小值后,又逐渐增大,SMD的极小值约为39.5 μm气液质量流量比为23%时,距离喷嘴出口20 mm液滴基本被气流束缚在扇形平面方向上±20 mm的范围内,液滴浓度和速度分布呈双峰型分布,最大值出现在扇形喷雾区域的边缘处(Y=15 mmY=15 mm);绝大部分液滴粒径1550 μm,峰值约为25 μm,索特尔平均直径为45.2 μm

Abstract:

Based on Eulerian-Lagrangian coupling modelthe performance of fan-shaped air-blast atomizer was simulated. The results showed that along with the increasing of gas-liquid mass flow ratioSauter Mean Diameter SMDdecreased firstlyand after reaching the minimum value 39.5 μmit began to increase. When the gas-liquid mass flow ratio was 23%the droplets located at 20 mm from the atomizer were restricted to the field ranging from 20 mm to 20 mm in the fan-shaped directionand the spatial droplet concentration distribution and velocity distribution were in bimodal distributionwith the maximal value occurring on the edge of  the fan-shaped fieldY=15 mmY=15 mm. The droplet diameter mostly ranged from 15 μm to 50 μmthe peak value and SMD were 25 μm and 45.2 μmrespectively.

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn