化工进展

• 能源加工与技术 • 上一篇    下一篇

磺化聚苯并咪唑/磺化聚醚砜酸碱复合质子交换膜的制备与表征

王迎姿1,2,尚玉明2,冯少广2,董文琦1,2,王要武2,谢晓峰2,吕亚非1   

  1. 1北京化工大学新型高分子材料制备与加工北京市重点实验室;
    2 清华大学核能与新能源技术研究院
  • 出版日期:2010-05-05 发布日期:2010-05-05

Acid-base composite membranes from sulfonated polybenzimidazole and sulfonated poly(arylene ether sulfone)

WANG Yingzi1,2,SHANG Yuming2,FENG Shaoguang2,DONG Wenqi1,2,
WANG Yaowu2,XIE Xiaofeng2,LÜ Yafei1
  

  1. 1 Beijing Key Laboratory of Preparation and Processing of Novel Polymer Materials,Beijing University of Chemical Technology;2 Institute of Nuclear and New Energy Technology ,Tsinghua University
  • Online:2010-05-05 Published:2010-05-05

摘要: 为提高膜的尺寸稳定性和阻醇性能,以磺化聚苯并咪唑(S-PBI)与高磺化度聚醚砜(ABPS)两种聚合物为原料,采用溶液共混的方法,制备了系列酸碱复合质子交换膜。研究了复合膜的甲醇溶胀性、吸水率、甲醇渗透系数、质子传导率随S-PBI含量的变化规律。研究表明,随着S-PBI含量的增加,膜的阻醇性能和尺寸稳定性明显提高;同时,复合膜具有较好的质子传导率,有望应用于直接甲醇燃料电池。

Abstract: Acid-base composite membranes derived from sulfonated polybenzimidazole (S-PBI) and sulfonated poly(arylene ether sulfone) were prepared via solution blend process. Properties of the membranes were characterized in terms of swelling ratio in methanol aqueous solution,water uptake,methanol permeability coefficient and proton conductivity. Results indicated that the introduction of S-PBI reduced the methanol swelling and methanol permeability coefficient of the membranes. Although the proton conductivity decreased with the addition of S-PBI,the composite membrane showed a relatively high proton conductivity with certain S-PBI content at high temperature. Thus,the composite membranes could be used as proton exchange membranes for direct methanol fuel cell applications.

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn