化工进展

• 化工过程与装备 • 上一篇    下一篇

十字旋阀塔板漏液性能

赵 培,施坤明,熊丹柳,张秋香   

  1. 华东理工大学化工学院
  • 出版日期:2010-02-05 发布日期:2010-02-05

Weeping rate study for cross-type valve trays

ZHAO Pei,SHI Kunming,XIONG Danliu,ZHANG Qiuxiang   

  1. College of Chemical Engineering,East China University of Science and Technology
  • Online:2010-02-05 Published:2010-02-05

摘要: 在φ1000 mm的圆塔内,以空气-水为介质,对十字旋阀塔板的泄漏率进行了测试,考察了液流强度、出口堰高等因素对泄漏性能的影响,并将其与交错十字旋阀塔板、组合导向浮阀塔板和F1型浮阀塔板的泄漏率进行了对比。结果表明:十字旋阀塔板在气速超过临界阀孔气速且液流强度较小时具有很好的漏液性能,经数据关联,获得了十字旋阀塔板漏液点孔速的关联式。

Abstract: The weeping rates of cross-type valve trays were measured in a φ1000mm column by using air-water system, and the influence of liquid flow rate and outlet weir height were studied. The weeping rates of the cross-type valve trays in different situations were compared with the interlaced cross-type valve trays, the combined directed valve trays and the F1 valve trays, which shows that the cross-type valve trays have better weeping performance for small liquid stream and when the gas velocity is higher than the valve hole critical gas-velocity. By correlating the experimental data, equations of gas velocity with weeping point of the cross-type valve trays were obtained.

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn