化工进展

• 工业催化 • 上一篇    下一篇

高氯酸-离子液体复合催化油酸聚合反应工艺

龙来早,吾满江·艾力,王永垒   

  1. 中国科学院新疆物理化学研究所
  • 出版日期:2009-05-05 发布日期:2009-05-05

Synthesis of estolides via polymerization of oleic acid catalyzed by perchloric acid-ionic liquids

LONG Laizao,WUMANJIANG·Aili,WANG Yonglei   

  1. Xinjiang Technical Institute of Physics & Chemistry, Chinese Academy of Sciences
  • Online:2009-05-05 Published:2009-05-05

摘要: 将高氯酸分别溶解于[(C2mim)BF4]、[(C4mim)BF4]和[(C8mim)BF4]制备了3种酸性离子液体复合催化剂,用于催化油酸的聚合反应,结果表明:[HClO4-(C4mim)BF4]的催化效果最佳。以[HClO4-(C4mim)BF4]为催化剂,考察了n(油酸)∶n(高氯酸)∶n(月桂酸)∶n[(C4mim)BF4]、反应温度和反应时间等条件对反应结果的影响。在n(油酸)∶n(高氯酸)∶n(月桂酸)∶n[(C4mim)BF4]=1∶0.7∶0.5∶0.5、45 ℃、24 h 的较佳工艺条件下,交内酯(estolides)的收率88%,倾点-17 ℃。此催化剂可以循环利用5次,实现了交内脂的绿色合成。

Abstract: HClO4 was dissolved in [(C2mim) BF4], [(C4mim)BF4] and [(C8mim) BF4] respectively and used as a compound catalyst in the polymerization of oleic acid. The results showed that [HClO4-(C4mim)BF4] had the highest catalytic activity. Using [HClO4-(C4mim)BF4] as catalyst, under the optimum reaction condition of n(oleic acid): n(HClO4)∶n(lauric acid)∶n[(C4mim)BF4]=1∶0.7∶0.5∶0.5, reaction temperature 45℃ and reaction time 24h, the yield of estolides was 88%,and its pour point reached -17℃. [HClO4-(C4mim)BF4] could be reused 5 times in this reaction system,and the green synthesis of estolides was realized.

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn