化工进展

• 材料科学与技术 • 上一篇    下一篇

四针状氧化锌晶须改性硅橡胶的性能

程青民,丁国芳,罗世凯   

  1. 西南科技大学材料学院中国工程物理研究院化工材料研究所
  • 出版日期:2009-11-05 发布日期:2009-11-05

Performance improvement of silicone rubber with tetrapod-like zinc oxide whisker

CHENG Qingmin,DING Guofang,LUO Shikai   

  1. Material Science and Engineering CollegeSouthwest University of Science and TechnologyInstitute of Chemical MaterialsChina Academy of Engineering Physics
  • Online:2009-11-05 Published:2009-11-05

摘要: 制备了四针状氧化锌晶须(ZnOw/硅橡胶复合材料;详尽地研究了晶须改性硅橡胶复合材料的力学性能、热稳定性及阻尼性能;通过扫描电镜观察了材料的断面以及晶须在基体中的分散性。结果表明:随氧化锌晶须填充量的增加,硅橡胶的力学性能降低,热稳定性和阻尼性能有明显的提高。当填充量为20份时,与纯硅橡胶相比,复合材料的热分解温度提高了近10 ℃,最大损耗因子提高了21%,有效阻尼温域向高温偏移了约15 ℃

Abstract: Tetrapod-like zinc oxide whisker (ZnOw) modified silicone rubber composites were prepared. The mechanical propertiesthermal stability and damping properties of the composites were investigated. The fracture surface of the composites and the dispersion degree of ZnOw were observed by scanning electron microscopy (SEM). Results showed that the composites have decreased mechanical propertiesbut obviously increased thermal stability and damping properties with the increase in the amount of ZnO whisker. For the composite with 20 phr of ZnOwthe thermal decomposition temperature increased about 10℃the damping factor maximum improved by 21% and the damping temperature range moved to higher temperature about 15℃ as compared with the pure silicone rubber.

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn