化工进展

• 研究开发 • 上一篇    下一篇

不同方法制备K2MnAl11O19六铝酸盐催化剂及其甲烷的燃烧活性

任晓光,郑建东, 宋永吉   

  1. 北京石油化工学院化工学院;北京化工大学化学工程学院;沈阳工业大学石油化工学院
  • 出版日期:2007-09-25 发布日期:2007-09-25

Synthesis of K2MnAl11O19 catalysts by using different methods and
investigation on their catalytic activity of methane combustion

REN Xiaoguang,ZHENG Jiandong,SONG Yongji   

  1. Beijing Institute of Petrochemical Technology;Beijing University of Chemical Technology;Shenyang University of Technology
  • Online:2007-09-25 Published:2007-09-25

摘要: 介绍了共沉淀法和异丙醇盐水解法制备了六铝酸盐催化剂K2MnAl11O19,用XRD、BET、SEM和TG-DTA技术及甲烷燃烧活性对催化剂进行了表征和活性验证。结果表明,两种方法所制备的催化剂经1200 ℃焙烧4 h后均可以形成完整的六铝酸盐晶型,同时都具有高的催化性能和高温稳定性,其中异丙醇盐水解法制备的K2MnAl11O19催化剂具有较高的比表面积和甲烷催化燃烧活性。

Abstract: K2MnAl11O19 catalysts were prepared by co-precipitation or hydrolysis of metal alkoxide. The effects of preparation methods on crystal structure and properties of the catalysts were investigated by means of XRD,BET,SEM,TG-DTA and activity evaluation for methane combustion. The results showed that the catalyst with good crystallinity was obtained after calcination at 1200 ℃ for 4 h by these two methods. At the same time the catalysts had high catalytic activity and stability. The catalyst prepared by hydrolysis of metal alkoxide maintained high surface area and had higher catalytic activity for methane combustion.

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn