化工进展

• 研究开发 • 上一篇    下一篇

MCM-48负载SO42-/ZrO2位催化硝化合成3,4-二甲基硝基苯

奚立民,于红艳   

  1. 台州职业技术学院生物与化学工程系
  • 出版日期:2006-12-25 发布日期:2006-12-25

Synthesis of 3,4-dimethylnitrobenzene by regioselective nitration with SO42-/ZrO2 supported on MCM-48 catalyst

XI Limin,YU Hongyan   

  1. Departement of Biological and Chemical EngineeringTaizhou Technical College
  • Online:2006-12-25 Published:2006-12-25

摘要: 采用液相沉积法制备了由MCM–48介孔分子筛负载SO42-/ZrO2的催化剂,探讨了催化剂表面的成酸过程和催化定位硝化反应机理,并以邻二甲苯和硝酸定位硝化反应为探针反应,考察了催化剂的性能;用酸碱滴定、TEM、N2吸附-脱附和Hammett指示法表征了固体超强酸。结果表明,固体超强酸保持了MCM-48的介孔结构,BET表面积高达208 m2/g,表面含有质子酸和路易斯酸中心,且具有强酸性(H0<-13.75);得到适宜的工艺条件:催化剂培烧温度500 ℃,反应温度60 ℃,n(硝酸)/n(邻二甲苯)=2.5,m(邻二甲苯)/m(催化剂)=25,反应时间3 h,产物收率为91.8%,含量达到82.1%。

Abstract: The solid superacid SO42-/ZrO2 supported on mesoporous MCM-48 was prepared by the liquid-phase precipitation,and the process for the formation of superacid on the catalyst surface and mechanism of regioselective nitration by catalysis were presented. The regioselective nitration of o-xylene with nitric acid was selected as a probe reaction to test the catalytic performance. The structure of the solid superacid was characterized with acid base titration,TEM,N2 adsorption/desorption and Hammett indicator. The results showed that the mesoporous structure of MCM-48 was maintained in the catalyst system,and there were Brønsted acid and Lewis acid sites on catalyst surface with a high BET surface area of 208 m2/g and better solid acidity (H0<-13.75). The optimum conditions were as follows:calcination temperature of catalyst was 500 ℃,the reaction was carried out at 60 ℃ for 3 h with n(nitric acid)/n(o-xylene) 2.5 and m(o-xylene)/m(catalyst) 25 to get the yield of 91.8%,the content of product up to 82.1%.

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn