化工进展

• 研究开发 • 上一篇    下一篇

NHPI/过渡金属催化甲苯氧化制苯甲酸

方亚辉,户安军,李斌栋,吕春绪   

  1. 南京理工大学化工学院
  • 出版日期:2006-11-25 发布日期:2006-11-25

Oxidation of toluene catalyzed by NHPI/transition metals

FANG Yahui,HU Anjun,LI Bindong,LÜ Chunxu   

  1. School of Chemical EngineeringNanjing University of Science and Technology
  • Online:2006-11-25 Published:2006-11-25

摘要: 报道了以N–羟基邻苯二甲酰亚胺(NHPI)/过渡金属为催化剂,乙酸为反应介质,氧气为氧化剂,催化甲苯氧化。探讨了不同金属配合物M(acac)2 (M = Cu,Co,Ni,Fe,Mn)及不同阴离子对该催化体系催化性能的影响。结果表明不同过渡金属中反应活性最高的是Mn,不同的Mn盐中催化活性最高的是MnCl2;同时优化了NHPI/MnCl2催化体系的反应条件。最佳反应条件为:n(MnCl2)∶n(NHPI)=5×10-2、n(催化剂)∶n(甲苯)=10.5%、V(乙酸)∶V(甲苯)=1∶1、氧气流速为0.05 L/min、温度100 ℃、反应时间为13 h。在此条件下甲苯的转化率能达到75.4%,苯甲酸的选择性能达到80. 9%。

Abstract: Oxidation of toluene catalyzed by N–hydroxyphthalimide (NHPI)/transitions metals with molecular oxygen in the acetic acid reaction medium was reported. The effects of different M(acac)2 (M = Cu,Co,Ni,Fe,Mn) complexes on the oxidation were studied and the results showed that among theses transition metals manganese showed the highest catalytic activity. The effects of different manganese salts were also investigated,and MnCl2 had the highest activity. The reaction conditions of the oxidation process catalyzed by NHPI/ MnCl2 catalyst system were optimized. The optimum conditions were as follows:n(MnCl2)∶n(NHPI)=5×10-2,n(catalyst)∶n(toluene)=10.5%,V(acetic acid)∶V(toluene)= 1∶1,oxygen flow rate 0.05 L/min,reaction temperature 100 ℃ and reaction time 13 h. Under these conditions,61.0% benzoic acid could be obtained with 80.9% selectivity at 75.4% conversion.

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn