化工进展

• 研究开发 • 上一篇    下一篇

头孢拉定结晶工艺

褚睿智,孟献梁,张 宝   

  1. 中国矿业大学化工学院
  • 出版日期:2006-10-25 发布日期:2006-10-25

Crystallization process of cephradine

CHU Ruizhi,MENG Xianliang,ZHANG Bao   

  1. School of Chemical Engineering and Technology,China University of Mining and Technology
  • Online:2006-10-25 Published:2006-10-25

摘要: 考察了不同结晶体系对头孢拉定结晶过程的影响,通过正交试验优化了头孢拉定结晶工艺条件,即水量为头孢拉定质量的2倍,三乙胺和N,N-二甲基甲酰胺体积比为1.2,结晶初始温度30℃,结晶终了温度5℃。结果证明,在此条件下所得产品结晶收率可达92%左右。利用高效液相色谱、电子显微镜对产品进行检测证明产品纯度可达98%以上,粒度分布均匀,晶面完整;同时通过40 ℃储存条件下的化学稳定性试验表明产品稳定性符合药品质量要求。

Abstract: Cephradine crystallization in different kinds of precipitating systems was studied. An orthogonal design test with 4 factors showed that the best conditions were as follows: the volume of water was 2 times of cephradine weight, ratio of TEA and DMF was 1.2∶1, initial crystallization temperature was 30℃, cooling temperature was 5 ℃. The yield of cephradine crystallization is about 92% in this condition. The production in this crystallization process was analysised with HPLC and EM. It shows that the purity of product is over 98% and the model of crystal is good and well-distribted. By chemical stability test under 40 ℃,it shows that the stability of product meet criterion of drugs.

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn