化工进展 ›› 2017, Vol. 36 ›› Issue (06): 2070-2077.DOI: 10.16085/j.issn.1000-6613.2017.06.015

• 化工过程与装备 • 上一篇    下一篇

埋管流化床内湿颗粒流动及混合特性的CFD-DEM数值模拟

刘道银, 宋诚骁, 王铮, 马吉亮, 陈晓平   

  1. 东南大学能源与环境学院, 能源热转换及其过程测控教育部重点实验室, 江苏 南京 210096
  • 收稿日期:2016-09-20 修回日期:2016-12-08 出版日期:2017-06-05 发布日期:2017-06-05
  • 通讯作者: 刘道银
  • 作者简介:刘道银(1982—),男,副研究员,研究方向为多相流及数值模拟。E-mail:dyliu@seu.edu.cn。
  • 基金资助:
    国家自然科学基金项目(51306035,51676042)。

CFD-DEM simulation of wet particles flow and mixing behavior in fluidized bed with immersed tubes

LIU Daoyin, SONG Chengxiao, WANG Zheng, MA Jiliang, CHEN Xiaoping   

  1. Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment, Southeast University, Nanjing 210096, Jiangsu, China
  • Received:2016-09-20 Revised:2016-12-08 Online:2017-06-05 Published:2017-06-05

摘要: 掺液滴的气固流化床,越来越多地应用于颗粒材料合成和改性工程,但是液滴使颗粒具有一定的湿度。湿颗粒具有黏性,与干燥颗粒流化特性有很大差异。本文应用迟滞碰撞模型,分别在颗粒碰撞的加载和卸载阶段考虑液体黏弹阻力(lubrication force)和液桥力引起的动能耗损,建立湿颗粒流化床CFD-DEM模型。对含有埋管的湿颗粒流化床进行数值模拟研究,比较了不同黏性条件下颗粒的流动及混合特性。发现随着颗粒黏性的增大,颗粒聚团加剧,气泡边界变得粗糙并逐渐转变为气体沟流,最终导致流化失效,埋管在床中起骨架作用,促进了沟流的形成。随着颗粒黏性的增大,颗粒的相对运动被阻碍,颗粒速度降低,床层压降逐渐减小,颗粒混合速度减慢。

关键词: 湿颗粒流化, 迟滞碰撞模型, 颗粒聚团, 颗粒混合

Abstract: Gas-solid fluidized beds with the presence of some liquid droplets are applied widely in industry. Due to the existence of droplets,particles become wet and viscous,which makes fluidization significantly different with dry particles. In this paper,a hysteresis contact model is applied to consider energy dissipation of lubrication force and liquid bridge force during wet particle collision,which is coupled with CFD-DEM model. The fluidization and mixing characteristics of wet particles under different conditions in a 2D fluidized bed with immersed tubes are compared. Generally,it is found that with the presence of liquid,the particles begin to agglomerate and the bubbles become gas channels. The immersed tubes play the part of frameworks,promoting the formation of gas channels. With increasing cohesiveness,the particle velocity decreases generally and the internal recirculation of wet particles is restrained. It is also found that with an increase in the cohesiveness,the pressure drop of the fluidized bed and the mixing speed of particles decrease.

Key words: wet particle, hysteresis contact model, agglomerate, solid mixing

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn