Chemical Industry and Engineering Progress ›› 2018, Vol. 37 ›› Issue (10): 3919-3927.DOI: 10.16085/j.issn.1000-6613.2017-2312

Previous Articles     Next Articles

Experimental study on the catalytic gasification of pine sawdust over nickel catalyst supported by copper slag

YUAN Xiaotao1,2, HU Jianhang1,2, ZHANG Fengxia2,3, LIU Huili1,2, LIU Zewei1,2, LI Hui1,2   

  1. 1 State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization, Kunming University of Science and Technology, Kunming 650093, Yunnan, China;
    2 Faculty of Metallurgy and Energy Engineering, Kunming University of Science and Technology, Kunming 650093, Yunnan, China;
    3 Kunming Metallurgy College, Kunming 650093, Yunnan, China
  • Received:2017-11-09 Revised:2018-01-11 Online:2018-10-05 Published:2018-10-05

铜渣载镍催化剂催化气化松木屑的实验研究

袁晓涛1,2, 胡建杭1,2, 张凤霞2,3, 刘慧利1,2, 刘泽伟1,2, 李慧1,2   

  1. 1 昆明理工大学省部共建复杂有色金属资源清洁利用国家重点实验室, 云南 昆明 650093;
    2 昆明理工大学冶金与能源工程学院, 云南 昆明 650093;
    3 昆明冶金高等专科学校, 云南 昆明 650093
  • 通讯作者: 胡建杭,教授。
  • 作者简介:袁晓涛(1990-),男,硕士研究生,研究方向为生物质热化学转化技术。
  • 基金资助:
    国家自然科学基金(51376085)、NSFC-云南联合基金(U1602272)、国家重点实验室自主课题(CNMRCUTS1706)及云南省科技领军人才项目(2015HA019)。

Abstract: The effects of different nickel loadings, catalyst calcination temperatures and catalytic temperatures on the catalytic gasification of pine sawdust were investigated in a two-stage fixed bed reactor. The water steam was the gasification medium, and NiO/copper slag was the catalyst which was characterized by XRD, TEM, BET, SEM, H2-TPR. The results showed that the copper slag Ni-based catalyst had a relatively low surface area. However, it showed an excellent resistance to the coke deposition and a high tar removal ability. The H2 yield, carbon conversion and carbon deposit were 26.91mmol/g, 94.86% and 0.16% respectively under the conditions of 2.0% nickel loading and 600℃ calcination temperature. When the catalytic temperature increased from 850℃ to 900℃, the H2 yield increased by only 0.28mmol/g. Based on the comprehensive consideration of energy consumption, catalytic performance and equipment spoilage, the optimal catalytic temperature was determined as 850℃. The application of copper slag in nickel catalyst could realize the reutilization of waste materials, and therefore have significant practical values.

Key words: pine sawdust, NiO/copper slag, catalytic gasification, reutilization of waste materials

摘要: 采用二级固定床管式反应器,以松木屑为原料,水蒸气为气化介质,载镍铜渣为催化剂,结合XRD、TEM、BET、SEM、H2-TPR等表征手段,考察了不同的镍载量、催化剂焙烧温度以及催化温度对生物质催化气化的影响。结果表明,铜渣载镍催化剂有相对低的比表面积,但它表现出极好的抗积炭性能和裂解焦油的能力。镍载量为2.0%的催化剂经过600℃焙烧后,氢气产量为26.91mmol/g,碳转化率达到了94.86%,积炭仅为0.16%;当催化温度从850℃升高到900℃时,氢气产量只增加了0.28mmol/g,综合考虑能源消耗、催化性能以及设备损耗等因素,最佳的催化温度为850℃。由此可见,铜渣在镍催化剂上的应用可实现废物回收利用,有着重要的实用价值。

关键词: 松木屑, 载镍铜渣, 催化气化, 废物利用

CLC Number: 

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd