Chemical Industry and Engineering Progree

• 精细化工 • Previous Articles     Next Articles

Combination and mechanism of diesel fuel pour point depressant at low temperature

ZENG Kui1,2,HAN Sheng2,WU Zhiqiao2,WANG Peng3,TAN Fengzhi1   

  1. 1 School of Chemical Engineering & Material,Dalian Polytechnic University,Dalian 116034,Liaoning,China;2 Department of Chemical Engineering,Shanghai Institute of Applied Technology,Shanghai 200235,China;3 Shanghai Hailian Company of Lubricating materials,Shanghai 200235,China
  • Online:2011-02-05 Published:2011-02-05

柴油降凝剂复配及降凝机理

曾 葵1,2,韩 生2,吴志桥2,王 鹏3,谭凤芝1   

  1. 1大连工业大学化工与材料学院,辽宁 大连 116034;2上海应用技术学院化学工程系,上海 200235;3上海海联润滑材料科技有限公司,上海 200235

Abstract:

Combination of pour point depressantsPPDsis one of the effective means to improve low temperature properties of diesel fuel. In this paper 0# diesel fuel was used to evaluate the effect of different PPDsthen PPDs with good effects were combined. Digital X-ray diffractionXRD),micropolariscope and differential scanning calorimeterDSCwere used to study the influence of PPD on the growth of wax crystal and thermodynamics of crystallization at a low temperature. The results showed that combination of polymethacrylate PPDKT4and polyethylene-viny acetate PPD had better effect especially at the ratio of 11. XRD and micropolariscope indicated that adsorption was the mechanism of polymethacrylate PPDKT4),while co-crystallization was the mechanism of polyethylene-viny acetate PPDAH-BSFH. DSC showed that 11 combination of polymethacrylate PPDKT4and polyethylene-viny acetate PPD could further lower the liquid-solid phase change.

摘要:

柴油降凝剂复配是有效提高其在柴油中降凝效果的手段之一。本文主要考察了不同类型柴油降凝剂在0#柴油中的降凝效果,筛选出其中效果较好的降凝剂进行复配,并考察了不同配比对其降凝效果的影响,最终采用低温原位X射线衍射、低温偏光显微镜和差示扫描量热法对比研究了柴油降凝剂加入前后对柴油蜡晶的生长规律和低温结晶热力学的影响。结果表明,聚甲基丙烯酸酯类降凝剂KT4与聚乙烯-乙酸乙烯酯类降凝剂AH-BSFH复配起到协同作用,具有更好的降凝效果,其最佳复配比例为11XRD、低温偏光显微镜的分析结果表明,KT4降凝剂主要是通过吸附理论来降凝,AH-BSFH降凝剂主要是通过共晶理论来降凝。DSC分析结果证明,KT4AH-BSFH11复配后使蜡晶的固-液相变能下降得更多,提高了降凝剂与蜡的匹配性,从而起到了协同作用。

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd